Investigations on microstructural changes in machining of Inconel 100 alloy using face turning experiments and 3D finite element simulations

[1]  W. W. Milligan,et al.  EFFECTS OF MICROSTRUCTURE ON THE HIGH TEMPERATURE CONSTITUTIVE BEHAVIOR OF IN100 , 2004 .

[2]  Z. M. Wang,et al.  The machinability of nickel-based alloys: a review , 1999 .

[3]  D. Ulutan,et al.  Machining induced surface integrity in titanium and nickel alloys: A review , 2011 .

[4]  Rajiv Shivpuri,et al.  Modeling microstructural development during the forging of Waspaloy , 1995 .

[5]  Philip J. Withers,et al.  Turning of advanced Ni based alloys obtained via powder metallurgy route , 2006 .

[6]  David K. Aspinwall,et al.  The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions , 2007 .

[7]  C. Guo,et al.  A finite element modeling approach to predicting white layer formation in nickel superalloys , 2009 .

[8]  W. C. Liu,et al.  Effect of the δ phase on the hot deformation behavior of Inconel 718 , 2005 .

[9]  Gregory B Olson,et al.  Characterization of the microstructure and phase equilibria calculations for the powder metallurgy superalloy IN100 , 2003 .

[10]  D. Axinte,et al.  Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling , 2014 .

[11]  M. Koiwa,et al.  Superplastic deformation and microstructure evolution in PM IN-100 superalloy , 1990 .

[12]  Ekkard Brinksmeier,et al.  Surface integrity in material removal processes: Recent advances , 2011 .

[13]  Matthew A. Davies,et al.  Recent advances in modelling of metal machining processes , 2013 .

[14]  M. Aindow,et al.  Techniques for microstructural characterization of powder-processed nickel-based superalloys , 2003 .

[15]  D. Mynors,et al.  Representing the superplasticity of Inconel 718 , 2004 .

[16]  David L. McDowell,et al.  Microstructure-sensitive modeling of polycrystalline IN 100 , 2008 .

[17]  Durul Ulutan,et al.  Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations , 2012 .

[18]  Suhas S. Joshi,et al.  Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718 , 2008 .

[19]  T. Özel,et al.  Experimental and Numerical Investigations on Machining Induced Surface Integrity in Inconel-100 Nickel-Base Alloy , 2014 .

[20]  T. Özel,et al.  Prediction of machining induced grain size with FE-Based simulations of Ti-6Al-4V and IN-100 alloys using the johnson-mehl-avrami-kolmogorov model , 2014 .

[21]  D. Ulutan,et al.  Empirical modeling of residual stress profile in machining nickel- based superalloys using the sinusoidal decay function , 2014 .

[22]  M. A. Mannan,et al.  Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools , 2004 .

[23]  T. Özel,et al.  Investigations on Machining Induced Microstructural Changes in Inconel 100 , 2015 .

[24]  Durul Ulutan,et al.  Multiobjective Optimization of Experimental and Simulated Residual Stresses in Turning of Nickel-Alloy IN100 , 2013 .