Novel one-pot route to monodisperse thermosensitive hollow microcapsules in a microfluidic system.

We present a simple one-pot synthetic approach for the preparation of monodisperse thermo-sensitive poly(N-isopropylacrylamide) (PNIPAM) microcapsules in a microfluidic system. Based on the mechanism of shear force-driven break-off, aqueous droplets of monomer solution are continuously generated in an immiscible continuous phase containing photoinitiators. Under UV irradiation, activated initiators are diffused into the interface between the continuous phase and the aqueous droplets, which trigger polymerization of NIPAM monomers. The PNIPAM microcapsules produced are hollow microcapsules with a thin shell membrane, high monodispersity, and fast response to environmental temperature. In addition, the size of microcapsules produced can be manipulated by the flow rate of the continuous phase or aqueous phase and different concentrations of surfactant to control interfacial tension between continuous phase and aqueous phase. Furthermore, the versatility of this approach enables the preparation of monodisperse microcapsules having the capability to encapsulate various materials such as proteins and nanoparticles under mild conditions. The in situ microfluidic synthetic method provides a novel approach for the preparation of monodisperse hollow microcapsules via a one-pot route.

[1]  R. Atkin,et al.  Oil core/polymer shell microcapsules by internal phase separation from emulsion droplets. II: controlling the release profile of active molecules. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[2]  S. Nakao,et al.  Preparation of Micron-Sized Monodispersed Thermoresponsive Core−Shell Microcapsules , 2002 .

[3]  Jie Zhang,et al.  Preparation of monodisperse thermo-sensitive poly(N-isopropylacrylamide) hollow microcapsules. , 2007, Journal of colloid and interface science.

[4]  Anja Mueller,et al.  Supramolecular materials via polymerization of mesophases of hydrated amphiphiles. , 2002, Chemical reviews.

[5]  F. Caruso,et al.  Disulfide cross-linked polymer capsules: en route to biodeconstructible systems. , 2006, Biomacromolecules.

[6]  M. Zourob,et al.  A micro-reactor for preparing uniform molecularly imprinted polymer beads , 2006 .

[7]  Lijian Liu,et al.  Microwave‐assisted preparation of temperature sensitive poly(N‐isopropylacrylamide) hydrogels in poly(ethylene oxide)‐600 , 2006 .

[8]  D. Streich,et al.  pH‐Sensitive Nanocontainers , 2001 .

[9]  M. Nakajima,et al.  New method of producing mono-sized polymer gel particles using microchannel emulsification and UV irradiation , 2005 .

[10]  Caruso,et al.  Hollow capsule processing through colloidal templating and self-assembly , 2000, Chemistry.

[11]  Zhibing Hu,et al.  Fabrication of monodisperse gel shells and functional microgels in microfluidic devices. , 2007, Angewandte Chemie.

[12]  F. Caruso,et al.  Degradable polyelectrolyte capsules filled with oligonucleotide sequences. , 2006, Angewandte Chemie.

[13]  C. Kumar,et al.  Microfluidic Synthesis of Cobalt Nanoparticles , 2006 .

[14]  S. Asher,et al.  Synthesis and utilization of monodisperse hollow polymeric particles in photonic crystals. , 2004, Journal of the American Chemical Society.

[15]  Ethan Tumarkin,et al.  Microfluidic production of biopolymer microcapsules with controlled morphology. , 2006, Journal of the American Chemical Society.

[16]  Shan‐Yang Lin,et al.  Thermal micro ATR/FT-IR spectroscopic system for quantitative study of the molecular structure of poly(N-isopropylacrylamide) in water , 1999 .

[17]  Todd Thorsen,et al.  Synthesis of monodisperse biodegradable microgels in microfluidic devices. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[18]  S. Asher,et al.  Modeling of stimulated hydrogel volume changes in photonic crystal Pb2+ sensing materials. , 2005, Journal of the American Chemical Society.

[19]  Toshiyuki Shikata,et al.  Contrary hydration behavior of N-isopropylacrylamide to its polymer, P(NIPAm), with a lower critical solution temperature. , 2007, The journal of physical chemistry. B.

[20]  P. Liljeroth,et al.  Electron-conducting quantum dot solids: novel materials based on colloidal semiconductor nanocrystals. , 2005, Chemical Society reviews.

[21]  Minseok Seo,et al.  Polymer particles with various shapes and morphologies produced in continuous microfluidic reactors. , 2005, Journal of the American Chemical Society.

[22]  Alan Dove,et al.  Cell-based therapies go live , 2002, Nature Biotechnology.

[23]  Toru Torii,et al.  Synthesis of Monodisperse Bicolored Janus Particles with Electrical Anisotropy Using a Microfluidic Co‐Flow System , 2006 .

[24]  U. Krull,et al.  Adsorption and hybridization of oligonucleotides on mercaptoacetic acid-capped CdSe/ZnS quantum dots and quantum dot-oligonucleotide conjugates. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[25]  M. Serpe,et al.  Hollow thermoresponsive microgels. , 2005, Small.

[26]  Feipeng Wu,et al.  Synthesis of Thermosensitive Hollow Spheres via a One-Pot Process , 2007 .

[27]  R. K. Shah,et al.  Monodisperse Thermoresponsive Microgels with Tunable Volume‐Phase Transition Kinetics , 2007 .

[28]  Giovanna Carturan,et al.  Encapsulation of functional cells by sol–gel silica: actual progress and perspectives for cell therapy , 2004 .

[29]  M. Okubo,et al.  Effect of polymer composition on the production of cationic multihollow polymer particles by the stepwise acid/alkali method , 1999 .

[30]  S. Asher,et al.  Fast responsive crystalline colloidal array photonic crystal glucose sensors. , 2006, Analytical chemistry.

[31]  Dhananjay Dendukuri,et al.  Continuous-flow lithography for high-throughput microparticle synthesis , 2006, Nature materials.

[32]  M. Márquez,et al.  Micro/Nano Encapsulation via Electrified Coaxial Liquid Jets , 2002, Science.

[33]  F. Szoka,et al.  Synthesis of vesicles on polymer template. , 2002, Journal of the American Chemical Society.

[34]  B D Ratner,et al.  Plasma polymerized N-isopropylacrylamide: synthesis and characterization of a smart thermally responsive coating. , 2001, Biomacromolecules.

[35]  P. J. Ollivier,et al.  Ordered mesoporous polymers of tunable pore size from colloidal silica templates. , 1999, Science.

[36]  Patrick Tabeling,et al.  Ordered and disordered patterns in two-phase flows in microchannels. , 2003, Physical review letters.

[37]  Kanaka Hettiarachchi,et al.  Controlled microfluidic encapsulation of cells, proteins, and microbeads in lipid vesicles. , 2006, Journal of the American Chemical Society.

[38]  Gleb B. Sukhorukov,et al.  Intelligent micro- and nanocapsules , 2005 .

[39]  Yulin Deng,et al.  In situ synthesis of temperature-sensitive hollow microspheres via interfacial polymerization. , 2005, Journal of the American Chemical Society.

[40]  Fumiyoshi Ikkai,et al.  Novel Method of Producing Polymer Gels in Aqueous Solution Using UV Irradiation , 2004 .

[41]  Y. Rhee,et al.  Generation of monodisperse alginate microbeads and in situ encapsulation of cell in microfluidic device , 2007, Biomedical microdevices.

[42]  Yahong Zhang,et al.  General Method for the Fabrication of Hollow Microcapsules with Adjustable Shell Compositions , 2005 .