Optimization of Sandwich Beams for Concentrated Loads

The optimization of sandwich structures for stiffness has been considered by a number of authors, but the optimization for strength, and particularly under concentrated loading, appears to be much less well understood. Part of the difficulty is that simplified structural theories, such as classical or first order shear deformation theory, do not give sufficient accuracy under concentrated loading. In the present work, an elasticity solution is employed that agrees well with both finite element and experimental strain gage readings. It is shown that strength values from three point bend test experiments on sandwich beams with polyurethane foam cores and carbon/epoxy faces can be successfully interpreted. An algorithm is then developed that gives the optimum design of sandwich structures for strength to weight under concentrated loading.

[1]  Stephen R. Swanson,et al.  Limits of quasi-static solutions in impact of composite structures , 1992 .

[2]  Lorna J. Gibson,et al.  Optimization of stiffness in sandwich beams with rigid foam cores , 1984 .

[3]  Ole Thybo Thomsen,et al.  Analysis of local bending effects in sandwich plates with orthotropic face layers subjected to localised loads , 1993 .

[4]  Ali Seireg,et al.  Optimizing the shape of mechanical elements and structures , 1997 .

[5]  C. Sun,et al.  Dynamic response of anisotropic laminated plates under initial stress to the impact of a mass , 1975 .

[6]  N. Pagano,et al.  Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates , 1970 .

[7]  Stephen R Reid,et al.  Impact behaviour of fibre-reinforced composite materials and structures , 2000 .

[8]  A. Vautrin.  Mechanics of Sandwich Structures , 1998 .

[9]  Jongman Kim,et al.  Design of sandwich structures for concentrated loading , 2001 .

[10]  A. Rao,et al.  Bending, vibration and buckling of simply supported thick orthotropic rectangular plates and laminates , 1970 .

[11]  S. Swanson.  6 – Elastic impact stress analysis of composite plates and cylinders , 2000 .

[12]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[13]  J. Romain,et al.  Formulas for Stress and Strain (4th ed.) , 1966 .

[14]  Ole Thybo Thomsen,et al.  Theoretical and experimental investigation of local bending effects in sandwich plates , 1995 .

[15]  Lorna J. Gibson,et al.  Minimum weight design of foam core sandwich panels for a given strength , 1987 .

[16]  Yeoshua Frostig,et al.  High‐Order Theory for Sandwich‐Beam Behavior with Transversely Flexible Core , 1992 .

[17]  Jongman Kim,et al.  Comparison of a Higher Order Theory for Sandwich Beams with Finite Element and Elasticity Analyses , 2000 .

[18]  C. Sun,et al.  Indentation Law for Composite Laminates. , 1982 .

[19]  Yeoshua Frostig.  On stress concentration in the bending of sandwich beams with transversely flexible core , 1993 .

[20]  K. Jackson.  Scaling effects in the flexural response and failure of composite beams , 1992 .

[21]  Lorna J. Gibson,et al.  Failure mode maps for foam core sandwich beams , 1987 .

[22]  R. Plunkett,et al.  Formulas for Stress and Strain , 1965 .

[23]  C. Sun,et al.  Use of Statical Indentation Laws in the Impact Analysis of Laminated Composite Plates , 1985 .

[24]  Michael R Wisnom,et al.  Relationship between strength variability and size effect in unidirectional carbon fibre/epoxy , 1991 .

[25]  Stephen R. Swanson,et al.  Introduction to Design and Analysis With Advanced Composite Materials , 1997 .