A date dropouts feedback scheduling policy of networked control systems

Deadband based control can reduce the consumption of the network resource greatly without seriously affecting the control performance. This paper introduces optimal theory into the deadband based control in the circumstance of multiple control loops to share one network. Optimal deadbands allocation can be achieved through studying the cost function and the utilization function and a data dropout policy is proposed. Optimal performance of control and network can be achieved based on the optimal allocation of deadbands.

[1]  Wei Zhang,et al.  Scheduling and feedback co-design for networked control systems , 2002, Proceedings of the 41st IEEE Conference on Decision and Control, 2002..

[2]  Karl-Erik Årzén,et al.  A simple event-based PID controller , 1999 .

[3]  Anton Cervin,et al.  TrueTime 1.1 -- Reference Manual , 2003 .

[4]  Wook Hyun Kwon,et al.  Stability and a scheduling method for network-based control systems , 1996, Proceedings of the 1996 IEEE IECON. 22nd International Conference on Industrial Electronics, Control, and Instrumentation.

[5]  Feng-Li Lian,et al.  Network architecture and communication modules for guaranteeing acceptable control and communication performance for networked multi-agent systems , 2006, IEEE Transactions on Industrial Informatics.

[6]  Kang G. Shin,et al.  Scheduling messages on controller area network for real-time CIM applications , 1997, IEEE Trans. Robotics Autom..

[7]  Nandit Soparkar,et al.  Trading computation for bandwidth: reducing communication in distributed control systems using state estimators , 2002, IEEE Trans. Control. Syst. Technol..

[8]  James Moyne,et al.  Using deadbands to reduce communication in networked control systems , 2002, Proceedings of the 2002 American Control Conference (IEEE Cat. No.CH37301).

[9]  Volodymyr Vasyutynskyy,et al.  Simple PID control algorithm adapted to deadband sampling , 2007, 2007 IEEE Conference on Emerging Technologies and Factory Automation (EFTA 2007).

[10]  Vincenzo Liberatore,et al.  Networked control system co-simulation for co-design , 2003, Proceedings of the 2003 American Control Conference, 2003..

[11]  V. Vasyutynskyy,et al.  Towards Comparison of Deadband Sampling Types , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[12]  V. Vasyutynskyy,et al.  Deadband Sampling in PID Control , 2007, 2007 5th IEEE International Conference on Industrial Informatics.