Singularities in five-axis machining: Cause, effect and avoidance

Singular configurations of five-axis machines have long been observed. Machining near to such singularities drastically affects the behaviour of machine axes movements. Singularities have been linked to the kinematic chain of the machine configuration but not necessarily machine axes movement. The first contribution of this paper is a link between cutter motion in work-piece and machine coordinate systems. This leads to a description for the machine axes movements for a given tool path. Unstable machine axes movements are discovered near singular configurations of the rotary axes. By relating these configurations to orientations in the workpiece coordinate system, a simple approach that avoids singularities by reorienting the workpiece is proposed. Machining tests verify the effectiveness of this approach.

[1]  Steven R Schmid Kalpakjian,et al.  Manufacturing Engineering and Technology , 1991 .

[2]  Stanislav S. Makhanov.  Optimization and correction of the tool path of the five-axis milling machine: Part 2: Rotations and setup , 2007, Math. Comput. Simul..

[3]  Pascal Ray,et al.  The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation , 2008, Comput. Aided Des..

[4]  Pierre Bourdet,et al.  Avoiding 5-axis singularities using tool path deformation , 2004 .

[5]  Beno Benhabib,et al.  Singularity analysis of mechanisms and robots via a velocity-equation model of the instantaneous kinematics , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[6]  Y. Altintas,et al.  Generalized kinematics of five-axis serial machines with non-singular tool path generation , 2013 .

[7]  J. Miller.  Numerical Analysis , 1966, Nature.

[8]  Knut Sørby,et al.  Inverse kinematics of five-axis machines near singular configurations , 2007 .

[9]  Q. J. Ge,et al.  Interference-free tool path generation for 5-axis sculptured surface machining using rational Bézier motions of a flat-end cutter , 2005 .

[10]  Xavier Beudaert,et al.  Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path , 2012 .

[11]  Jianzhong Fu,et al.  Non-singular tool path planning by translating tool orientations in C-space , 2014 .

[12]  Claire Lartigue,et al.  Model for the prediction of 3D surface topography in 5-axis milling , 2010 .