Lidar remote sensing of biophysical properties of tolerant northern hardwood forests

Previous forest research using time-of-flight lidar data has primarily focused on forest ecosystems with conifers as the predominant tree type. In this study, small-footprint time-of-flight lidar data were used to estimate biophysical properties of tolerant hardwood forests composed predominantly of mature sugar maple (Acer saccharum Marsh.) and yellow birch (Betula alleghaniensis Britton) in the Turkey Lakes Watershed (TLW) near Sault Ste. Marie, Ontario. Ground reference data were collected during the first two weeks of July 2000 for 49 circular sample plots, each 0.04 ha (or 400 m2) in area. Lidar data were acquired on 24 August 2000 using an Optech ALTM 1225 (Optech Incorporated, Toronto, Ont.). Ten biophysical forest metrics were derived for each plot: (1) maximum tree height (hmax), (2) Lorey's mean tree height (hLorey), (3) mean diameter at breast height (DBH), (4) total basal area (BA), (5) percent canopy openness (CO%), (6) leaf area index (LAI), (7) ellipsoidal crown closure (CC), (8) total aboveground biomass (BIO), (9) total wood volume (VOL), and (10) stem density (SD). Likewise, three laser height metrics were derived for each plot: (1) maximum laser height (Lhmax), (2) mean laser height (Lhmean), and (3) mean laser height calculated from lidar returns filtered based on a threshold applied to the intensity return values (LhIR). The results demonstrate that for each forest with a given stand structure, there exists one or more laser height metrics derived from lidar data that are capable of providing an estimate of various biophysical properties. Lhmax was the best estimator of hmax (r2 = 0.79) and hLorey (r2 = 0.87); LhIR was the best estimator of BA (r2 = 0.85), BIO (r2 = 0.85), and VOL (r2 = 0.87); and Lhmean was the best estimator of CC (r2 = 0.89), DBH (r2 = 0.63), CO% (r2 = 0.76), LAI (r2 = 0.80), and SD (r2 = 0.86). The results illustrate the potential for laser height metrics to estimate (i) plot heights and stem densities, (ii) aboveground biomass and volume, and (iii) canopy-related measures.

[1]  T. W. Anderson.  Estimation of Linear Functional Relationships: Approximate Distributions and Connections with Simultaneous Equations in Econometrics , 1976 .

[2]  D. Rubin,et al.  Maximum likelihood from incomplete data via the EM - algorithm plus discussions on the paper , 1977 .

[3]  T. Hassard,et al.  Applied Linear Regression , 2005 .

[4]  Donald G. Leckie,et al.  Automated measurements of terrain reflection and height variations using an airborne infrared laser system , 1985 .

[5]  Ian K. Morrison,et al.  Organic matter and mineral distribution in an old-growth Acer saccharum forest near the northern limit of its range. , 1990 .

[6]  James H. Everitt,et al.  MEASURING CANOPY STRUCTURE WITH AN AIRBORNE LASER ALTIMETER , 1993 .

[7]  D. B. Coyle,et al.  Optimization of an airborne laser altimeter for remote sensing of vegetation and tree canopies , 1994, Proceedings of IGARSS '94 - 1994 IEEE International Geoscience and Remote Sensing Symposium.

[8]  K. Jon Ranson,et al.  Imaging radar for ecosystem studies , 1995 .

[9]  M. Nilsson.  Estimation of tree heights and stand volume using an airborne lidar system , 1996 .

[10]  E. Næsset.  Determination of mean tree height of forest stands using airborne laser scanner data , 1997 .

[11]  Canada. Forestry Branch.  The state of Canada's forests 1996-1997 : learning from history , 1997 .

[12]  E. Næsset.  Estimating timber volume of forest stands using airborne laser scanner data , 1997 .

[13]  K. Kraus,et al.  Determination of terrain models in wooded areas with airborne laser scanner data , 1998 .

[14]  S. Magnussen,et al.  Derivations of stand heights from airborne laser scanner data with canopy-based quantile estimators , 1998 .

[15]  J. Means.  Use of Large-Footprint Scanning Airborne Lidar To Estimate Forest Stand Characteristics in the Western Cascades of Oregon , 1999 .

[16]  Steen Magnussen,et al.  Recovering Tree Heights from Airborne Laser Scanner Data , 1999, Forest Science.

[17]  Emmanuel P. Baltsavias,et al.  Airborne laser scanning: basic relations and formulas , 1999 .

[18]  Emmanuel P. Baltsavias,et al.  A comparison between photogrammetry and laser scanning , 1999 .

[19]  Aloysius Wehr,et al.  Airborne laser scanning—an introduction and overview , 1999 .

[20]  Richard A. Fournier,et al.  Earth observation for sustainable development of forests (EOSD)-a national project , 1999, IEEE 1999 International Geoscience and Remote Sensing Symposium. IGARSS'99 (Cat. No.99CH36293).

[21]  J. Blair,et al.  The Laser Vegetation Imaging Sensor: a medium-altitude, digitisation-only, airborne laser altimeter for mapping vegetation and topography , 1999 .

[22]  Forrest G. Hall,et al.  SLICER Airborne Laser Altimeter Characterization of Canopy Structure and Sub-canopy Topography for the BOREAS Northern and Southern Study Regions: Instrument and Data Product Description , 2000 .

[23]  E. Næsset,et al.  Estimating tree heights and number of stems in young forest stands using airborne laser scanner data , 2001 .

[24]  S. Franklin.  Remote Sensing for Sustainable Forest Management , 2001 .

[25]  P. Atkinson,et al.  Deriving DSMs from LiDAR data with kriging , 2002 .

[26]  E. Næsset.  Predicting forest stand characteristics with airborne scanning laser using a practical two-stage procedure and field data , 2002 .

[27]  E. Næsset,et al.  Estimating tree height and tree crown properties using airborne scanning laser in a boreal nature reserve , 2002 .

[28]  Åsa Persson,et al.  Detecting and measuring individual trees using an airborne laser scanner , 2002 .

[29]  M. Flood,et al.  LiDAR remote sensing of forest structure , 2003 .

[30]  Malik Beshir Malik,et al.  Applied Linear Regression , 2005, Technometrics.