Efficient force distribution and leg posture for a bio-inspired spider robot

Legged walking and climbing robots have recently achieved important results and developments, but they still need further improvement and study. As demonstrated by recent works, bio-mimesis can lead to important technical solutions in order to achieve efficient systems able to climb, walk, fly or swim (Saunders et al., 2006 [36], Ayers, 2001 [25], Safak and Adams, 2002 [26]). In this paper, taking into account the anatomy and the adhesive and locomotion capabilities of the spider (i.e., an eight-legged system), we present on the one hand a study of the foot force and torque distribution in different operative and slope conditions and, on the other hand, a posture evaluation by comparing different leg configurations in order to minimize the torque effort requirements.

[1]  Hongyi Liu,et al.  Force distribution for the legs of a quadruped walking vehicle , 1997, J. Field Robotics.

[2]  Raymond J. Cipra,et al.  Visualization of the Contact Force Solution Space for Multi-Limbed Robots , 2006 .

[3]  D. McFarland,et al.  Artificial Ethology , 2001 .

[4]  L. Siciliano.  Modelling and Control of Robot Manipulators , 2000 .

[5]  Karim Djouani,et al.  Optimal force distribution for the legs of an hexapod robot , 2003, Proceedings of 2003 IEEE Conference on Control Applications, 2003. CCA 2003..

[6]  George G. Adams,et al.  Dynamic Modeling and Hydrodynamic Performance of Biomimetic Underwater Robot Locomotion , 2002, Auton. Robots.

[7]  Ali Dhinojwala,et al.  Synthetic gecko foot-hairs from multiwalled carbon nanotubes. , 2005, Chemical communications.

[8]  Giorgio Figliolini,et al.  Mechanics and Simulation of Six-Legged Walking Robots , 2007 .

[9]  Ronald S. Fearing,et al.  Nanomolding based fabrication of synthetic gecko foot-hairs , 2002, Proceedings of the 2nd IEEE Conference on Nanotechnology.

[10]  R. Full,et al.  Evidence for van der Waals adhesion in gecko setae , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[11]  Tobias Seidl,et al.  Getting a grip on spider attachment: an AFM approach to microstructure adhesion in arthropods , 2004 .

[12]  A. Saunders,et al.  The RiSE climbing robot: body and leg design , 2006, SPIE Defense + Commercial Sensing.

[13]  Jorge Angeles,et al.  Real-time force optimization in parallel kinematic chains under inequality constraints , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[14]  Vijay R. Kumar,et al.  Force distribution in closed kinematic chains , 1988, IEEE J. Robotics Autom..

[15]  Alessandro Gasparetto,et al.  Kinematic study of the spider system in a biomimetic perspective , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  Auke Jan Ijspeert,et al.  Central pattern generators for locomotion control in animals and robots: A review , 2008, Neural Networks.

[17]  Ronald S. Fearing,et al.  Synthetic gecko foot-hair micro/nano-structures for future wall-climbing robots , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[18]  Thomas Kindermann,et al.  Walking: A Complex Behavior Controlled by Simple Networks , 1995, Adapt. Behav..

[19]  Yixin Chen,et al.  Over-constrained rigid multibody systems: differential kinematics and fault tolerance , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[20]  A B Kesel,et al.  Adhesion measurements on the attachment devices of the jumping spider Evarcha arcuata , 2003, Journal of Experimental Biology.

[21]  R. Full,et al.  Adhesive force of a single gecko foot-hair , 2000, Nature.

[22]  John T. Wen,et al.  Kinematic manipulability of general constrained rigid multibody systems , 1999, IEEE Trans. Robotics Autom..

[23]  K. H. Low,et al.  Modular formulation for dynamics of multi-legged robots , 1997, 1997 8th International Conference on Advanced Robotics. Proceedings. ICAR'97.

[24]  Charles A. Klein,et al.  Optimal force distribution for the legs of a walking machine with friction cone constraints , 1990, IEEE Trans. Robotics Autom..

[25]  R. Foelix,et al.  The biology of spiders. , 1987 .

[26]  Shane M. Farritor,et al.  On the Design of Rapidly Deployable Field Robotic Systems , 2000 .

[27]  Huajian Gao,et al.  Mechanics of hierarchical adhesion structures of geckos , 2005 .

[28]  K. Autumn,et al.  Mechanisms of Adhesion in Geckos1 , 2002, Integrative and comparative biology.

[29]  Kiyotaka Izumi,et al.  Optimal Force Distribution for the Legs of a Quadruped Robot , 1999 .

[30]  Bruno Siciliano,et al.  Modelling and Control of Robot Manipulators , 1997, Advanced Textbooks in Control and Signal Processing.

[31]  David E. Orin,et al.  Efficient formulation of the force-distribution equations for simple closed-chain robotic mechanisms , 1991, IEEE Trans. Syst. Man Cybern..

[32]  Houxiang Zhang,et al.  Climbing and Walking Robots: towards New Applications , 2007 .

[33]  Nabil Alshurafa,et al.  Artificial spider: eight-legged arachnid and autonomous learning of locomotion , 2006, SPIE Defense + Commercial Sensing.

[34]  Alessandro Gasparetto,et al.  Passive control of attachment in legged space robots , 2010 .

[35]  David Wettergreen,et al.  Dante II: Technical Description, Results, and Lessons Learned , 1999, Int. J. Robotics Res..

[36]  Ronald S. Fearing,et al.  Synthetic gecko foot-hair micro/nano-structures as dry adhesives , 2003 .