Experimental tests for the characterization of sisal fiber reinforced cementitious matrix for strengthening masonry structures

Abstract The experimental characterization of a Natural Fiber Reinforced Cementitious Matrix (NFRCM), made of sisal fibers yarns impregnated with a water-based resin and embedded in an inorganic matrix based on natural lime is presented in this paper. The Sisal-NFRCM performances are investigated through tensile and single-lap shear tests, adopting the dispositions of the Round Robin Tests developed for the FRCM characterization by the RILEM Technical Committee 250-CSM. The tensile stress-strain curve evidenced the tension stiffening effect of the mortar between cracks, which tended progressively to reduce. In shear tests, the failure and the progressive slippage of the sisal yarns was observed.

[1]  Holmer Savastano,et al.  Evaluation of mechanical, physical and thermal performance of cement-based tiles reinforced with vegetable fibers , 2008 .

[2]  K. Pickering,et al.  A review of recent developments in natural fibre composites and their mechanical performance , 2016 .

[3]  M. Fagone,et al.  Round Robin Test on tensile and bond behaviour of Steel Reinforced Grout systems , 2017 .

[4]  Carlo Poggi,et al.  Testing Procedures for the Uniaxial Tensile Characterization of Fabric-Reinforced Cementitious Matrix Composites , 2016 .

[5]  Sérgio Francisco dos Santos,et al.  Non-conventional cement-based composites reinforced with vegetable fibers: A review of strategies to improve durability , 2015 .

[6]  P. Alam,et al.  H , 1887, High Explosives, Propellants, Pyrotechnics.

[7]  Tsuyoshi Murata,et al.  {m , 1934, ACML.

[8]  N. Gattesco,et al.  Characterization tests of GFRM coating as a strengthening technique for masonry buildings , 2017 .

[9]  F. Micelli,et al.  Experimental investigation of tensile and bond properties of Carbon-FRCM composites for strengthening masonry elements , 2017 .

[10]  Gianluca Cicala,et al.  Composites Based on Natural Fibre Fabrics , 2010 .

[11]  M. Aiello,et al.  Glass fabric reinforced cementitious matrix: Tensile properties and bond performance on masonry substrate , 2017 .

[12]  A. Cecchi,et al.  Experiments on natural fibers: durability and mechanical properties , 2017 .

[13]  Paulo B. Lourenço,et al.  Performance assessment of basalt FRCM for retrofit applications on masonry , 2017 .

[14]  P. Alam.  ‘G’ , 2021, Composites Engineering: An A–Z Guide.

[15]  K. Scrivener,et al.  Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites , 2000 .

[16]  Carlo Poggi,et al.  Test methods for Textile Reinforced Mortar systems , 2017 .

[17]  Thomas de Quincey.  [C] , 2000, The Works of Thomas De Quincey, Vol. 1: Writings, 1799–1820.

[18]  S. Mohanty,et al.  A review of the recent developments in biocomposites based on natural fibres and their application perspectives , 2015 .

[19]  S. Santis,et al.  Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures , 2017 .

[20]  P. Alam.  ‘A’ , 2021, Composites Engineering: An A–Z Guide.

[21]  Stefano De Santis,et al.  A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems , 2015 .

[22]  M. Aiello,et al.  Recommendation of RILEM Technical Committee 250-CSM: Test method for Textile Reinforced Mortar to substrate bond characterization , 2018, Materials and Structures.

[23]  T. Aravinthan,et al.  A review of current development in natural fiber composites for structural and infrastructure applications , 2010 .

[24]  R. T. Toledo Filho,et al.  The Influence of Fiber Treatment on the Mechanical Behavior of Jute Textile Reinforced Concrete , 2014 .

[25]  Marilda Barra,et al.  Fiber-matrix interactions in cement mortar composites reinforced with cellulosic fibers , 2011 .

[26]  R. Olivito,et al.  Development of durable cementitious composites using sisal and flax fabrics for reinforcement of masonry structures , 2014 .