Multivariate sensor arrays as industrial and environmental monitoring systems

Abstract The advances in the development of chemical sensors from individual probes to one-and two-dimensional sensor arrays will play an important role in the remote sensing of complex samples in the future. However, special attention must be given to the selectivity and response characteristics of each sensor and to determining the best chemometric calibration technique to use. Examples of chemical sensor arrays are presented by examining the role of chemometrics and the applications to field problems in analytical science.

[1]  Bruce R. Kowalski,et al.  Generalized rank annihilation factor analysis , 1986 .

[2]  Udo Weimar,et al.  Multicomponent gas analysis: An analytical chemistry approach applied to modified SnO2 sensors , 1990 .

[3]  J. Grate,et al.  Correlation of surface acoustic wave device coating responses with solubility properties and chemical structure using pattern recognition , 1986 .

[4]  Susan L. Rose-Pehrsson,et al.  Smart sensor system for trace organophosphorus and organosulfur vapor detection employing a temperature-controlled array of surface acoustic wave sensors, automated sample preconcentration, and pattern recognition , 1993 .

[5]  Sinclair S. Yee,et al.  Calibration of nonlinear solid-state sensor arrays using multivariate regression techniques , 1992 .

[6]  B. Kowalski,et al.  Monitoring a dryer operation using an array of piezoelectric crystals , 1988 .

[7]  Kenneth R. Beebe,et al.  Selection of adsorbates for chemical sensor arrays by pattern recognition , 1986 .

[8]  Avraham Lorber,et al.  Quantifying chemical composition from two-dimensional data arrays , 1984 .

[9]  P. Jurs,et al.  Detection of hazardous vapors including mixtures using pattern recognition analysis of responses from surface acoustic wave devices. , 1988, Analytical chemistry.

[10]  Meinhard Knoll,et al.  Multisensor array for pH, K+, Na+ and Ca2+ measurements based on coated-film electrodes , 1992 .

[11]  B. Kowalski,et al.  Partial least-squares regression: a tutorial , 1986 .

[12]  J. Friedman Multivariate adaptive regression splines , 1990 .

[13]  P. Jurs,et al.  Detection of hazardous gases and vapors: pattern recognition analysis of data from an electrochemical sensor array , 1986 .

[14]  J. Friedman,et al.  Projection Pursuit Regression , 1981 .

[15]  J Wang,et al.  Coated amperometric electrode arrays for multicomponent analysis. , 1990, Analytical chemistry.

[16]  J. Gardner,et al.  Intelligent vapour discrimination using a composite 12-element sensor array , 1990 .

[17]  A. Schmautz,et al.  Application-specific design of a piezoelectric chemosensor array , 1992 .

[18]  E. V. Thomas,et al.  Partial least-squares methods for spectral analyses. 1. Relation to other quantitative calibration methods and the extraction of qualitative information , 1988 .

[19]  Bruce R. Kowalski,et al.  Nonlinear calibration using projection pursuit regression: application to an array of ion-selective electrodes , 1988 .

[20]  A. Walmsley,et al.  Evaluation of chemometric techniques for the identification and quantification of solvent mixtures using a thin-film metal oxide sensor array , 1991 .

[21]  D. Myers,et al.  Correspondence analysis and adsorbate selection for chemical sensor arrays , 1991 .

[22]  T. Nakamoto,et al.  Perfume and flavour identification by odour-sensing system using quartz-resonator sensor array and neural-network pattern recognition☆ , 1993 .

[23]  Matthias Otto,et al.  Model studies on multiple channel analysis of free magnesium, calcium, sodium, and potassium at physiological concentration levels with ion-selective electrodes , 1985 .

[24]  Kenneth R. Beebe,et al.  Multicomponent analysis using an array of piezoelectric crystal sensors , 1987 .

[25]  B. Kowalski,et al.  Chemical piezoelectric sensor and sensor array characterization , 1986 .

[26]  Joseph R. Stetter,et al.  Monitoring of electrochemically inactive compounds by amperometric gas sensors , 1984 .

[27]  Dermot Diamond,et al.  Modeling of potentiometric electrode arrays for multicomponent analysis , 1991 .

[28]  Takamichi Nakamoto,et al.  Odour-sensing system using a quartz-resonator sensor array and neural-network pattern recognition , 1989 .

[29]  Bruce R. Kowalski,et al.  Sparingly selective ion-selective electrode arrays for multicomponent analysis , 1988 .

[30]  Gary D. Christian,et al.  Measurement of sodium hydroxide concentration with a renewable reagent-based fiber-optic sensor , 1990 .

[31]  C. Hierold,et al.  Quantitative analysis of gas mixtures with non-selective gas sensors , 1989 .

[32]  R. Müller,et al.  Multidimensional sensor for gas analysis , 1986 .

[33]  Sinclair S. Yee,et al.  An integrated array of multiple thin-film metal oxide sensors for quantification of individual components in organic vapor mixtures , 1993 .

[34]  Ingemar Lundström,et al.  Evaluation of a multiple gas mixture with a simple MOSFET gas sensor array and pattern recognition , 1990 .