Modeling Young’s modulus of rubber–clay nanocomposites using composite theories

Abstract The modulus reinforcement of rubber–clay nanocomposites was examined using Guth, Halpin–Tsai and the modified Halpin–Tsai equations, which are universally used for composites reinforced by fiber-like or rod-like fillers. Taking account of the lower contribution of the platelet-like filler to Young’s modulus than that of the fiber-like filler, the modulus reduction factor (MRF) for the platelet-like fillers of 0.66, determined by fitting experimental data, is introduced into the above three equations. The aspect ratios of clay platelets in rubber–clay nanocomposites were determined by statistically analyzing TEM micrographs. The predicting ability of the above three equations for polymer–clay nanocomposites is improved by introducing MRF.

[1]  Liqun Zhang,et al.  Structure and properties of nitrile rubber (NBR)–clay nanocomposites by co‐coagulating NBR latex and clay aqueous suspension , 2003 .

[2]  J. Halpin.  Stiffness and Expansion Estimates for Oriented Short Fiber Composites , 1969 .

[3]  R. Vaia,et al.  Polymer/layered silicate nanocomposites as high performance ablative materials , 1999 .

[4]  H. Jeon,et al.  Structure-property relationships in exfoliated polyisoprene/clay nanocomposites , 2004 .

[5]  T. Kurauchi,et al.  Sorption of water in nylon 6‐clay hybrid , 1993 .

[6]  Lawrence E. Nielsen,et al.  Dynamic mechanical properties of particulate‐filled composites , 1970 .

[7]  C. Hui,et al.  An interface model for the prediction of Young's modulus of layered silicate‐elastomer nanocomposites , 1998 .

[8]  T. D. Fornes,et al.  Modeling properties of nylon 6/clay nanocomposites using composite theories , 2003 .

[9]  Jozef Bicerano,et al.  Micromechanics of nanocomposites: comparison of tensile and compressive elastic moduli, and prediction of effects of incomplete exfoliation and imperfect alignment on modulus , 2002 .

[10]  E. Guth.  Theory of Filler Reinforcement , 1945 .

[11]  Emmanuel P. Giannelis,et al.  Polymer Layered Silicate Nanocomposites , 1996 .

[12]  Yizhong Wang,et al.  Morphology and mechanical properties of clay/styrene‐butadiene rubber nanocomposites , 2000 .

[13]  T. D. Fornes,et al.  Nylon 6 nanocomposites: the effect of matrix molecular weight , 2001 .

[14]  T. D. Fornes,et al.  Erratum to “Nylon 6 nanocomposites: the effect of matrix molecular weight”: [Polymer 42 (2001) 9929–40] , 2002 .

[15]  L. Nielsen.  Generalized Equation for the Elastic Moduli of Composite Materials , 1970 .

[16]  J. C. H. Affdl,et al.  The Halpin-Tsai Equations: A Review , 1976 .

[17]  Liqun Zhang,et al.  Preparation and characterization of Rubber-Clay nanocomposites , 2000 .

[18]  Liqun Zhang,et al.  Structure of carboxylated acrylonitrile‐butadiene rubber (CNBR)–clay nanocomposites by co‐coagulating rubber latex and clay aqueous suspension , 2001 .

[19]  P. Messersmith,et al.  Synthesis and barrier properties of poly(ε‐caprolactone)‐layered silicate nanocomposites , 1995 .