Investigation of the synergy influence of KSiCB and POE‐g‐MAH on mechanical properties of basalt fiber‐reinforced PA6 composites

[1]  Jing Guo,et al.  A study on dispersions of CB and CNT in PP/EPDM composites and their mechanical reinforcement , 2019, Polymers and Polymer Composites.

[2]  V. Kräusel,et al.  Hot single-point incremental forming of glass-fiber-reinforced polymer (PA6GF47) supported by hot air , 2019, Journal of Manufacturing Processes.

[3]  Jihui Wang,et al.  Effect of nano-OMMTs on mode I and mode II fracture toughness of continuous glass fibre reinforced polypropylene composites , 2019, Composite Structures.

[4]  L. Turng,et al.  Highly filled biochar/ultra-high molecular weight polyethylene/linear low density polyethylene composites for high-performance electromagnetic interference shielding , 2018, Composites Part B: Engineering.

[5]  Wei Zhang,et al.  A novel synthetic strategy for preparing semi-aromatic components modified polyamide 6 polymer , 2018 .

[6]  Shurong Dong,et al.  Emulsion Electrospinning of Polytetrafluoroethylene (PTFE) Nanofibrous Membranes for High-Performance Triboelectric Nanogenerators. , 2018, ACS applied materials & interfaces.

[7]  R. Arjmandi,et al.  Effects of ammonium polyphosphate content on mechanical, thermal and flammability properties of kenaf/polypropylene and rice husk/polypropylene composites , 2017 .

[8]  Changyu Shen,et al.  A tunable strain sensor based on a carbon nanotubes/electrospun polyamide 6 conductive nanofibrous network embedded into poly(vinyl alcohol) with self-diagnosis capabilities , 2017 .

[9]  Xu-Ming Xie,et al.  Morphology development and superior mechanical properties of PP/PA6/SEBS ternary blends compatibilized by using a highly efficient multi-phase compatibilizer , 2017 .

[10]  Erping Zhou,et al.  High performance triboelectric nanogenerators based on phase-inversion piezoelectric membranes of poly(vinylidene fluoride)-zinc stannate (PVDF-ZnSnO3) and polyamide-6 (PA6) , 2016 .

[11]  R. Farsani,et al.  Charpy impact behavior of clay/basalt fiber-reinforced polypropylene nanocomposites at various temperatures , 2016 .

[12]  J. Byun,et al.  Effect of phenoxy-based coating resin for reinforcing pitch carbon fibers on the interlaminar shear strength of PA6 composites , 2016 .

[13]  M. Sawangphruk,et al.  New Routes to Functionalize Carbon Black for Polypropylene Nanocomposites. , 2016, Langmuir : the ACS journal of surfaces and colloids.

[14]  Q. Dou,et al.  Melting and crystallization behaviors, morphology, and mechanical properties of β-polypropylene/polypropylene-graft-maleic anhydride/calcium sulfate whisker composites , 2016 .

[15]  D. Bhattacharyya,et al.  Biocomposites from waste derived biochars: Mechanical, thermal, chemical, and morphological properties. , 2016, Waste management.

[16]  Xin Wang,et al.  An in situ polymerization approach for functionalized MoS2/nylon-6 nanocomposites with enhanced mechanical properties and thermal stability , 2015 .

[17]  Hao Wang,et al.  Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles , 2015 .

[18]  P. H. Araújo,et al.  Influence of the injection molding process on the mechanical properties of (PA6/GF/MMT) nanocomposite , 2015 .

[19]  Ming‐bo Yang,et al.  Toughening of PA6/EPDM-g-MAH/HDPE ternary blends via controlling EPDM-g-MAH grafting degree: the role of core–shell particle size and shell thickness , 2015, Polymer Bulletin.

[20]  Zhishen Wu,et al.  Evaluation of prestressed basalt fiber and hybrid fiber reinforced polymer tendons under marine environment , 2014 .

[21]  S. Khalili,et al.  Influence of thermal conditions on the tensile properties of basalt fiber reinforced polypropylene–clay nanocomposites , 2014 .

[22]  Wei Yang,et al.  Insight into the nucleating and reinforcing efficiencies of carbon nanofillers in poly(vinylidene fluoride): a comparison between carbon nanotubes and carbon black , 2013, Journal of Materials Science.

[23]  Ayse Aytac,et al.  Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites , 2013 .

[24]  G. Ahmetli,et al.  Epoxy composites based on inexpensive char filler obtained from plastic waste and natural resources , 2013 .

[25]  Hongwei He,et al.  Compressive properties of nano-calcium carbonate/epoxy and its fibre composites , 2013 .

[26]  Wanxi Zhang,et al.  Mechanical properties, crystallization and melting behaviors of carbon fiber-reinforced PA6 composites , 2013, Journal of Thermal Analysis and Calorimetry.

[27]  A. Durmuş,et al.  Isothermal crystallization kinetics of glass fiber and mineral-filled polyamide 6 composites , 2012, Journal of Materials Science.

[28]  Qi Wang,et al.  The investigation of melamine polyphosphate flame retardant polyamide-6/inorganic siliciferous filler with different geometrical form , 2009 .

[29]  C. Han,et al.  Reactive compatibilization of polyamide-12/poly(butylene terephthalate) blends with hyperbranched PEI-g-PA12: Morphology and thermal properties , 2009 .

[30]  Sang Wook Park,et al.  Fracture toughness of the nano-particle reinforced epoxy composite , 2008 .

[31]  W. C. Tjiu,et al.  A processing-induced clay dispersion and its effect on the structure and properties of polyamide 6 , 2004 .

[32]  K. Wei,et al.  Induced γ → α crystal transformation in blends of polyamide 6 and liquid crystalline copolyester , 2000 .

[33]  M. Mucha.  Crystallization of isotactic polypropylene containing carbon black as a filler , 2000 .

[34]  W. Bragg,et al.  The crystal structures of two polyamides (‘nylons’) , 1947, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.