The capsule's contribution to total hip construct stability – A finite element analysis

Instability is a significant concern in total hip arthroplasty (THA), particularly when there is structural compromise of the capsule due to pre‐existing pathology or due to necessities of surgical approach. An experimentally grounded fiber‐direction‐based finite element model of the hip capsule was developed, and was integrated with an established three‐dimensional model of impingement/dislocation. Model validity was established by close similarity to results from a cadaveric experiment in a servohydraulic hip simulator. Parametric computational runs explored effects of graded levels of capsule thickness, of regional detachment from the capsule's femoral or acetabular insertions, of surgical incisions of capsule substance, and of capsule defect repairs. Depending strongly upon the specific site, localized capsule defects caused varying degrees of construct stability compromise, with several specific situations involving over 60% decrement in dislocation resistance. Construct stability was returned substantially toward intact‐capsule levels following well‐conceived repairs, although the suture sites involved were often at substantial risk of failure. These parametric model results underscore the importance of retaining or robustly repairing capsular structures in THA, in order to maximize overall construct stability. © 2011 Orthopaedic Research Society Published by Wiley Periodicals, Inc. J Orthop Res 29:1642–1648, 2011

[1]  Carpenter Nh,et al.  Normal processes and restraints in wound healing. , 1977 .

[2]  M. A. Ali Khan,et al.  Dislocation following total hip replacement. , 1981, The Journal of bone and joint surgery. British volume.

[3]  B F Morrey,et al.  Dislocations after total hip arthroplasty. , 1982, The Journal of bone and joint surgery. American volume.

[4]  W. Dihlmann,et al.  Computed Tomography of the Hip Joint Capsule , 1983, Journal of computer assisted tomography.

[5]  B F Morrey,et al.  Instability after total hip arthroplasty. , 1992, The Orthopedic clinics of North America.

[6]  L. Munuera,et al.  Dislocation in low-friction arthroplasty. , 1992, The Journal of arthroplasty.

[7]  J. Kao,et al.  Piriformis tendon repair failure after total hip replacement. , 1992, Orthopaedic review.

[8]  C Gerber,et al.  Mechanical strength of repairs of the rotator cuff. , 1994, The Journal of bone and joint surgery. British volume.

[9]  T D Brown,et al.  A Finite Element Analysis of Factors Influencing Total Hip Dislocation , 1998, Clinical orthopaedics and related research.

[10]  Robert Poss,et al.  Posterior Approach to Total Hip Replacement Using Enhanced Posterior Soft Tissue Repair , 1998, Clinical orthopaedics and related research.

[11]  T. Brown,et al.  Development and Physical Validation of a Finite Element Model of Total Hip Dislocation. , 1999, Computer methods in biomechanics and biomedical engineering.

[12]  R. Ganz,et al.  The anatomy and function of the gluteus minimus muscle. , 2000, The Journal of bone and joint surgery. British volume.

[13]  M A Ritter,et al.  A Clinical Comparison of the Anterolateral and Posterolateral Approaches to the Hip , 2001, Clinical orthopaedics and related research.

[14]  Thomas D Brown,et al.  Spatial distribution of hip capsule structural and material properties. , 2002, Journal of biomechanics.

[15]  John J Callaghan,et al.  Effects of acetabular component orientation on dislocation propensity for small-head-size total hip arthroplasty. , 2002, Clinical biomechanics.

[16]  Robert B Bourne,et al.  Surgical Approach, Abductor Function, and Total Hip Arthroplasty Dislocation , 2002, Clinical orthopaedics and related research.

[17]  L. Labey,et al.  Posterior Transosseous Capsulotendinous Repair in Total Hip Arthroplasty: A Cadaver Study , 2002, The Journal of bone and joint surgery. American volume.

[18]  Wayne G Paprosky,et al.  The early dislocation rate in primary total hip arthroplasty following the posterior approach with posterior soft-tissue repair. , 2003, The Journal of arthroplasty.

[19]  John J Callaghan,et al.  Kinematics, kinetics, and finite element analysis of commonplace maneuvers at risk for total hip dislocation. , 2003, Journal of biomechanics.

[20]  R. Scott,et al.  A simple capsulorrhaphy in a posterior approach for total hip arthroplasty. , 2004, The Journal of arthroplasty.

[21]  W. Miehlke,et al.  Failure of Capsular Enhanced Short External Rotator Repair After Total Hip Replacement , 2004, Clinical orthopaedics and related research.

[22]  John J Callaghan,et al.  Implementing capsule representation in a total hip dislocation finite element model. , 2004, The Iowa orthopaedic journal.

[23]  W. Mihalko,et al.  Hip Mechanics After Posterior Structure Repair in Total Hip Arthroplasty , 2004, Clinical orthopaedics and related research.

[24]  T D Brown,et al.  Activity-dependence of the "safe zone" for impingement versus dislocation avoidance. , 2005, Medical engineering & physics.

[25]  Matthew J Silva,et al.  Flexor digitorum profundus tendon to bone tunnel repair: a vascularization and histologic study in canines. , 2005, The Journal of hand surgery.

[26]  R. Ogden,et al.  Hyperelastic modelling of arterial layers with distributed collagen fibre orientations , 2006, Journal of The Royal Society Interface.

[27]  W. Harris,et al.  Range of motion and stability in total hip arthroplasty with 28-, 32-, 38-, and 44-mm femoral head sizes. , 2005, The Journal of arthroplasty.

[28]  John J Callaghan,et al.  Design factors influencing performance of constrained acetabular liners: finite element characterization. , 2006, Journal of biomechanics.

[29]  Kevin Ong,et al.  The epidemiology of revision total hip arthroplasty in the United States. , 2009, The Journal of bone and joint surgery. American volume.