Sol-gel synthesis of SiC@Y3Al5O12 composite nanopowder and preparation of porous SiC-ceramics derived from it

[1]  M. Tomkovich,et al.  Production of Ceramic Materials Based on SiC with Low-Melting Oxide Additives , 2019, Glass and Ceramics.

[2]  V. Kuryavyi,et al.  Fabrication of highly-doped Nd3+:YAG transparent ceramics by reactive SPS , 2018, Ceramics International.

[3]  I. Tananaev,et al.  Spark Plasma Sintering of Special-Purpose Functional Ceramics Based on UO2, ZrO2, Fe3O4/α-Fe2O3 , 2018, Glass Physics and Chemistry.

[4]  J. Casas,et al.  3D-Printed Fe-doped silicon carbide monolithic catalysts for wet peroxide oxidation processes , 2018, Applied Catalysis B: Environmental.

[5]  S. Kulinich,et al.  Structure and electronic properties of biomorphic carbon matrices and SiC ceramics prepared on their basis , 2018, Journal of Applied Physics.

[6]  Feng Zhang,et al.  Fabrication of high performance macroporous tubular silicon carbide gas filters by extrusion method , 2018, Ceramics International.

[7]  M. Saadatfar,et al.  Synthesis and thermal shock evaluation of porous SiC ceramic foams for solar thermal applications , 2018, Journal of the American Ceramic Society.

[8]  S. Sugiyama,et al.  Application of Si/SiC ceramic filters as support for structural palladium catalysts for the reductive decomposition of aqueous nitrite , 2018, Journal of the Ceramic Society of Japan.

[9]  N. Simonenko,et al.  Polymer Technology of Porous SiC Ceramics Using Milled SiO2 Fibers , 2018, Russian Journal of Inorganic Chemistry.

[10]  Hongmei Chen,et al.  Synthesis of highly dispersed silicon carbide powders by a solvothermal-assisted sol–gel process , 2018, Applied Physics A.

[11]  N. Simonenko,et al.  Heat-Treatment-Induced Evolution of the Mesostructure of Finely Divided Y3Al5O12 Produced by the Sol–Gel Method , 2018, Russian Journal of Inorganic Chemistry.

[12]  Jun Yang,et al.  Fine platinum nanoparticles supported on a porous ceramic membrane as efficient catalysts for the removal of benzene , 2017, Scientific Reports.

[13]  Xinqiang Wang,et al.  Improvement of mechanical strength of ultralight resorcinol–formaldehyde/silica aerogel by addition of zirconia , 2017, Journal of Sol-Gel Science and Technology.

[14]  N. Simonenko,et al.  Preparation of porous SiC-ceramics by sol–gel and spark plasma sintering , 2017, Journal of Sol-Gel Science and Technology.

[15]  M. Sahimi,et al.  Fabrication of high-surface area nanoporous SiOC ceramics using pre-ceramic polymer precursors and a sacrificial template: Precursor effects , 2017 .

[16]  M. Tomkovich,et al.  Hot-pressed ceramic SiC–YAG materials , 2017, Inorganic Materials.

[17]  Junbo Wang,et al.  Synthesis of biomorphic SiC fabric ceramic from pre-processed ramie fibres , 2017 .

[18]  A. L. Ortiz,et al.  Liquid-phase assisted flash sintering of SiC from powder mixtures prepared by aqueous colloidal processing , 2017 .

[19]  Jie Ren,et al.  Porous SiOC composites fabricated from preceramic polymers and wood powders for efficient dye adsorption and removal , 2017, Research on Chemical Intermediates.

[20]  I. Tananaev,et al.  Spark Plasma Sintering as a high-tech approach in a new generation of synthesis of nanostructured functional ceramics , 2017, Nanotechnologies in Russia.

[21]  B. Glasmacher,et al.  Porous biomorphic silicon carbide ceramics coated with hydroxyapatite as prospective materials for bone implants. , 2016, Materials science & engineering. C, Materials for biological applications.

[22]  A. Kribus,et al.  Experimental study of ceramic foams used as high temperature volumetric solar absorber , 2016 .

[23]  J. Becerra,et al.  Permeability and mechanical integrity of porous biomorphic SiC ceramics for application as hot-gas filters , 2016 .

[24]  A. Terracciano,et al.  Design and development of a porous heterogeneous combustor for efficient heat production by combustion of liquid and gaseous fuels , 2016 .

[25]  M. J. López-Robledo,et al.  Sliding wear resistance of porous biomorphic sic ceramics , 2016 .

[26]  C. Aneziris,et al.  Fabrication of SiC reticulated porous ceramics with multi-layered struts for porous media combustion , 2016 .

[27]  H. Li,et al.  Pressure drop simulation of structured corrugation foam packing by computational fluid dynamics , 2016 .

[28]  Xiao‐nong Cheng,et al.  In situ synthesis and electrical properties of porous SiOC ceramics decorated with SiC nanowires , 2016 .

[29]  N. Simonenko,et al.  Preparation of nanostructured thin films of yttrium aluminum garnet (Y3Al5O12) by Sol—Gel technology , 2016, Russian Journal of Inorganic Chemistry.

[30]  G. Zeng,et al.  Tuning pore structure of corrosion resistant solid-state-sintered SiC porous ceramics by particle size distribution and phase transformation , 2016 .

[31]  Zheng-ren Huang,et al.  R-curve analysis of solid-phase-sintered and liquid-phase-sintered silicon carbide ceramics by indentation fracture and indentation-strength-in-bending methods , 2016 .

[32]  A. Züttel,et al.  Investigation of a Pt containing washcoat on SiC foam for hydrogen combustion applications , 2016 .

[33]  R. Ghimire,et al.  Treatment of Produced Water using Silicon Carbide Membrane Filters , 2015 .

[34]  M. Fukushima,et al.  Preparation of reaction-bonded porous silicon carbide with denser surface layer in one-pot process , 2015 .

[35]  N. Simonenko,et al.  Preparation of highly porous NbxTa1–xC ceramics from polymer-matrix composite materials based on a phenol-formaldehyde binder and low hydrated hydroxide of niobium and tantalum , 2015, Inorganic Materials.

[36]  A. Najafi,et al.  Improvement of SiC nanopowder synthesis by sol–gel method via TEOS/resin phenolic precursors , 2015, Journal of Sol-Gel Science and Technology.

[37]  M. A. Zharkov,et al.  Preparation of high-porous SiC ceramics from polymeric composites based on diatomite powder , 2015, Journal of Materials Science.

[38]  Sarina Bao,et al.  Wetting behavior of aluminium and filtration with Al2O3 and SiC ceramic foam filters , 2014 .

[39]  P. Sánchez,et al.  Silicon Carbide as Catalytic Support for Energy and Environmental Applications , 2014 .

[40]  Young‐Wook Kim,et al.  Electrical resistivity of α-SiC ceramics sintered with Al2O3 or AlN additives , 2014 .

[41]  Hanqin Liang,et al.  Microstructure Evolution of α‐SiC in the Liquid Phase Sintering Process , 2014 .

[42]  V. Mazinani.  Effect of pH on SiC nanopowder synthesized by sol-gel method , 2014 .

[43]  Michael Müller,et al.  Corrosion of silicon carbide hot gas filter candles in gasification environment , 2014 .

[44]  S. Li,et al.  Preparation and Properties of In Situ Formed YAG Bonded Porous SiC Ceramics , 2014 .

[45]  Jochen Kriegesmann,et al.  2.04 – Processing of Silicon Carbide-Based Ceramics , 2014 .

[46]  D. V. Grashchenkov,et al.  Synthesis of nanocrystalline silicon carbide using the sol-gel technique , 2013, Russian Journal of Inorganic Chemistry.

[47]  M. Nygren,et al.  Sliding-wear resistance of ultrafine-grained SiC densified by spark plasma sintering with 3Y2O3 + 5Al2O3 or Y3Al5O12 additives , 2013 .

[48]  B. Liu.  Properties and Manufacturing Method of Silicon Carbide Ceramic New Materials , 2013 .

[49]  Yuping Zeng,et al.  Mechanical Properties of Solid‐Sintered Porous Silicon Carbide Ceramics , 2013 .

[50]  Xiao-dong Shen,et al.  Synthesis of monolithic mesoporous silicon carbide from resorcinol–formaldehyde/silica composites , 2013 .

[51]  N. Simonenko,et al.  Synthesis of ultrafine yttrium aluminum garnet using sol-gel technology , 2012, Russian Journal of Inorganic Chemistry.

[52]  A. L. Ortiz,et al.  Microstructural evolution and contact-mechanical properties of SiC ceramics prepared colloidally with low additive content , 2012 .

[53]  N. Ehsani,et al.  Synthesis and characterization of SiC nano powder with low residual carbon processed by sol–gel method , 2012 .

[54]  J. Byun,et al.  Characterization of SiCf/SiC and CNT/SiC composite materials produced by liquid phase sintering , 2011 .

[55]  Yang Yang,et al.  Preparation and properties of porous silicon carbide ceramics through coat-mix and composite additives process , 2011 .

[56]  H. Abderrazak,et al.  Silicon Carbide: Synthesis and Properties , 2011 .

[57]  H. Seifert,et al.  Liquid phase formation in the system SiC, Al2O3, Y2O3 , 2011 .

[58]  A. Spetz,et al.  Technology and application opportunities for SiC-FET gas sensors , 2011 .

[59]  A. Najafi,et al.  Effect of APC addition on stability of nanosize precursors in sol–gel processing of SiC nanopowder , 2010 .

[60]  A. Kohyama,et al.  Thermal stress relaxation creep and microstructural evolutions of nanostructured SiC ceramics by liquid phase sintering , 2010 .

[61]  K. Hur,et al.  CHARACTERIZATION OF LIQUID PHASE SITERED SIC AND SIC/SIC COMPOSITE MATERIALS , 2010 .

[62]  A. L. Ortiz,et al.  Effect of the sintering additive content on the non-protective oxidation behaviour of pressureless liquid-phase-sintered α-SiC in air , 2010 .

[63]  Xudong Sun,et al.  A Coprecipitation Coating Synthesis of SiC/YAG Composites , 2009 .

[64]  H. Yoon,et al.  Mechanical properties of silicon carbide sintered with additive Y3Al5O12 , 2009 .

[65]  A. L. Ortiz,et al.  Oxidation behavior of pressureless liquid-phase-sintered α-SiC in ambient air at elevated temperatures , 2008 .

[66]  A. L. Ortiz,et al.  Sliding-Wear-Resistant Liquid-Phase-Sintered SiC Processed Using α-SiC Starting Powders , 2007 .

[67]  A. L. Ortiz,et al.  Effect of liquid-phase content on the contact-mechanical properties of liquid-phase-sintered α-SiC , 2007 .

[68]  A. L. Ortiz,et al.  Hardness degradation in liquid-phase-sintered SiC with prolonged sintering , 2007 .

[69]  Raymond A. Cutler,et al.  High-Toughness Silicon Carbide as Armor , 2005 .

[70]  Hui Yang,et al.  Sintering and microstructure of silicon carbide ceramic with Y3Al5O12 added by sol-gel method. , 2005, Journal of Zhejiang University. Science. B.

[71]  A. Samanta,et al.  Decomposition reactions in the SiC-Al-Y-O system during gas pressure sintering , 2001 .

[72]  A. Samanta,et al.  SiC–YAG sintered composites from hydroxy hydrogel powder precursors , 2000 .

[73]  H. Seifert,et al.  Phase equilibria and crystal chemistry in the Y_2O_3–Al_2O_3–SiO_2 system , 1999 .

[74]  M. Narisawa,et al.  Synthesis of Ultrafine SiC Powders from Carbon-Silica Hybridized Precursors with Carbothermic Reduction , 1998 .

[75]  D. Shim,et al.  Effects of YAG-Phase Amount on the Microstructure and Phase Transformation during the Liquid-Phase Sintering of β-SiC , 1998 .