Low-magnetic-field dependence and anisotropy of the critical current density in coated conductors

Many applications of ReBCO-coated conductors operate at low magnetic fields in the superconductor (below 200 mT). In order to predict the critical current and AC loss in these applications, it is necessary to know the anisotropy and field dependence of the critical current density at low magnetic fields. In this paper, we obtain a formula for the critical current density in a coated conductor as a function of the local magnetic field and its orientation. Afterwards, we apply this formula to predict the critical current of a pancake coil that we constructed. We extract the critical current density of the tape from measurements of the in-field critical current at several orientations. Numerical simulations correct the effect of the self-field in the measurements and successfully predict the critical current in the pancake coil. We found that a simple elliptical model is not enough to describe the anisotropy of the critical current density. In conclusion, the analytical fit that we present is useful to predict the critical current of actual coils. Therefore, it may also be useful for other structures made of coated conductor, like power-transmission cables, Roebel cables and resistive fault current limiters.

[1]  C. F. Hempstead,et al.  CRITICAL PERSISTENT CURRENTS IN HARD SUPERCONDUCTORS , 1962 .

[2]  Q. Jia,et al.  Materials science challenges for high-temperature superconducting wire. , 2007, Nature materials.

[3]  Shen,et al.  Direct observation of the current distribution in thin superconducting strips using magneto-optic imaging. , 1996, Physical review. B, Condensed matter.

[4]  Hosup Kim,et al.  Analyses of a solenoid magnet made of pancakes of coated conductors , 2005 .

[5]  Valerii M. Vinokur,et al.  Vortices in high-temperature superconductors , 1994 .

[6]  S. I. Kim,et al.  Mechanisms of weak thickness dependence of the critical current density in strong-pinning ex situ metal–organic-deposition-route YBa2Cu3O7−x coated conductors , 2006, cond-mat/0605613.

[7]  M R Halse,et al.  AC FACE FIELD LOSSES IN A TYPE-II SUPERCONDUCTOR. , 1970 .

[8]  S. Nagaya,et al.  Upgrading Design to a 25 T Cryogen-Free Superconducting Magnet Based on Low Temperature and High Magnetic Field Properties of the Practical CVD Processed Coated Conductors , 2010, IEEE Transactions on Applied Superconductivity.

[9]  Seyong Choi,et al.  Angular Dependence of Critical Current in Coated Conductors at 4.2 K and Magnet Design , 2009, IEEE Transactions on Applied Superconductivity.

[10]  A. Campbell.  The interaction distance between flux lines and pinning centres , 1971 .

[11]  M. Eisterer,et al.  Thickness dependence of the critical current density in superconducting films: A geometrical approach , 2010, 1001.1056.

[12]  Q. X. Jia,et al.  Strongly enhanced current densities in superconducting coated conductors of YBa2Cu3O7–x + BaZrO3 , 2004, Nature materials.

[13]  Wilfried Goldacker,et al.  Transport and magnetization ac losses of ROEBEL assembled coated conductor cables: measurements and calculations , 2009 .

[14]  J. Livingston,et al.  Surface Barrier in Type-II Superconductors , 1964 .

[15]  J. MacManus‐Driscoll,et al.  Practical vortex diodes from pinning enhanced YBa2Cu3O7−δ , 2009, 0904.3497.

[16]  R. L. Holtz,et al.  Recent Developments in 2G HTS Coil Technology , 2009, IEEE Transactions on Applied Superconductivity.

[17]  Francesco Grilli,et al.  AC loss study of antiparallel connected YBCO coated conductors , 2009 .

[18]  T. Hamajima,et al.  Design of a 30 T Superconducting Magnet Using a Coated Conductor Insert , 2009, IEEE Transactions on Applied Superconductivity.

[19]  Self-field effects upon the critical current density of flat superconducting strips , 2004, cond-mat/0410093.

[20]  N. Mestres,et al.  Strong isotropic flux pinning in solution-derived YBa2Cu3O7-x nanocomposite superconductor films. , 2007, Nature materials.

[21]  Enric Pardo,et al.  Modeling of coated conductor pancake coils with a large number of turns , 2008 .

[22]  Francesco Grilli,et al.  Simulation of ac loss in Roebel coated conductor cables , 2010 .

[23]  F. Gomory,et al.  Theoretical and experimental study of AC loss in high temperature superconductor single pancake coils , 2008, 0808.0061.

[24]  Larkin,et al.  From isotropic to anisotropic superconductors: A scaling approach. , 1992, Physical review letters.

[25]  Jun Lu,et al.  Physical properties of Hastelloy® C-276™ at cryogenic temperatures , 2008 .

[26]  Rodney A. Badcock,et al.  Frequency dependence of magnetic ac loss in a five strand YBCO Roebel cable , 2010 .

[27]  M. Eisterer,et al.  Assessing the spatial and field dependence of the critical current density in YBCO bulk superconductors by scanning Hall probes , 2008, 0811.4279.

[28]  V. Selvamanickam,et al.  Microstructural and superconducting properties of high current metal–organic chemical vapor deposition YBa2Cu3O7−δ coated conductor wires , 2009 .

[29]  J. D. Johnson,et al.  The elastic regime of vortices in superconducting YBCO and multilayer YBCO/PrBCO films , 1995 .

[30]  P. Kováč,et al.  Influence of external magnetic fields on critical currents of solenoids wound with anisotropic HTS tapes - theoretical analysis , 1997 .

[31]  Q. Jia,et al.  The role of interfacial defects in enhancing the critical current density of YBa2Cu3O7−δ coatings , 2009 .

[32]  C. Jooss,et al.  Magneto-optical studies of current distributions in high-Tc superconductors , 2002 .

[33]  Nicholas J. Long,et al.  Model for the angular dependence of critical currents in technical superconductors , 2008 .

[34]  L. Méchin,et al.  EVIDENCE FOR VORTEX PINNING BY DISLOCATIONS IN YBA2CU3O7-DELTA LOW-ANGLE GRAIN BOUNDARIES , 1998 .

[35]  Brandt,et al.  Type-II-superconductor strip with current in a perpendicular magnetic field. , 1993, Physical review. B, Condensed matter.

[36]  J. Durrell,et al.  Practical vortex diodes from pinning enhanced YBa2Cu3O7-delta , 2009 .

[37]  C. Navau,et al.  Self-fields in thin superconducting tapes: Implications for the thickness effect in coated conductors , 2009, 0912.2654.

[38]  Risto Mikkonen,et al.  How to determine critical current density in YBCO tapes from voltage–current measurements at low magnetic fields , 2007 .

[39]  Y. Shiohara,et al.  Properties of Long GdBCO Coated Conductor by IBAD-PLD Method—The First GdBCO Coil Test , 2007, IEEE Transactions on Applied Superconductivity.

[40]  P. Kováč,et al.  Energy and critical current considerations of Bi(2223)/Ag coils for micro-superconducting magnetic energy storage: influence of operating temperature and winding geometry within the same overall tape length , 2001 .

[41]  B. Maiorov,et al.  Effect of the misalignment between the applied and internal magnetic fields on the critical currents of “tilted coated conductors” , 2005 .

[42]  Clem,et al.  Magnetization and transport currents in thin superconducting films. , 1994, Physical review. B, Condensed matter.

[43]  Venkat Selvamanickam,et al.  Influence of Zr and Ce doping on electromagnetic properties of (Gd,Y)–Ba–Cu–O superconducting tapes fabricated by metal organic chemical vapor deposition , 2009 .

[44]  Schultz,et al.  Anisotropy of the critical current density in epitaxial YBa2Cu3Ox films. , 1990, Physical review letters.

[45]  D. Christen,et al.  Magnetic field orientation dependence of flux pinning in (Gd,Y)Ba2Cu3O7―x coated conductor with tilted lattice and nanostructures , 2009 .

[46]  W. T. Norris,et al.  Calculation of hysteresis losses in hard superconductors carrying ac: isolated conductors and edges of thin sheets , 1970 .