Developing Cost-Effective Indirect Manufacturing of H13 Steel from Extrusion-Printing to Post-Processing

[1]  Kaiwen Wei,et al.  Microstructure and mechanical properties of H13 tool steel fabricated by high power laser powder bed fusion , 2022, Materials Science and Engineering: A.

[2]  P. Nandwana,et al.  Combined DSC/TGA Analysis to Rationalize the As-Sintered Microstructure in Binder Jet Additively Manufactured H13 Tool Steel , 2022, Transactions of the Indian Institute of Metals.

[3]  F. Ning,et al.  Physical-Mechanical Behaviors of Stainless Steel Plate-Lattice Built by Material Extrusion Additive Manufacturing , 2022, Journal of Materials Processing Technology.

[4]  Jack G. Zhou,et al.  From semisolid metal processing to thixotropic 3D printing of metallic alloys , 2022, Virtual and Physical Prototyping.

[5]  T. Voisin,et al.  Critical differences between electron beam melted and selective laser melted Ti-6Al-4V , 2022, Materials & Design.

[6]  S. Neumeier,et al.  Metal fused filament fabrication of the nickel-base superalloy IN 718 , 2022, Journal of Materials Science.

[7]  C. Emmelmann,et al.  Piston-Based Material Extrusion of Ti-6Al-4V Feedstock for Complementary Use in Metal Injection Molding , 2022, Materials.

[8]  Jinguo Ge,et al.  Deposition structure dependence of microstructural evolution and mechanical anisotropy of H13 buildups using cold metal transfer technology , 2021, Journal of Alloys and Compounds.

[9]  A. Molinari,et al.  Effects of process parameters, debinding and sintering on the microstructure of 316L stainless steel produced by binder jetting , 2021, Materials Science and Engineering: A.

[10]  Thomas Schweizer,et al.  Fused filament fabrication of stainless steel structures - from binder development to sintered properties , 2021, Additive Manufacturing.

[11]  S. Mei,et al.  Microstructure and mechanical properties of Ti-6.5Al-2Zr-Mo-V alloy processed by Laser Powder Bed Fusion and subsequent heat treatments , 2021, Additive Manufacturing.

[12]  Mark E. Polzer,et al.  Fused Filament Fabrication‐Based Additive Manufacturing of Commercially Pure Titanium , 2021, Advanced Engineering Materials.

[13]  Gurminder Singh,et al.  Additive manufacturing of 17–4 PH steel using metal injection molding feedstock: Analysis of 3D extrusion printing, debinding and sintering , 2021, Additive Manufacturing.

[14]  X. Boulnat,et al.  Modeling of interstitials diffusion during debinding/sintering of 3D printed metallic filaments: application to titanium alloy and its embrittlement , 2021 .

[15]  M. Salmi,et al.  Feasibility study of producing multi-metal parts by Fused Filament Fabrication (FFF) technique , 2021, Journal of Manufacturing Processes.

[16]  T. Henry,et al.  Mechanical behavior of 17-4 PH stainless steel processed by atomic diffusion additive manufacturing , 2021, The International Journal of Advanced Manufacturing Technology.

[17]  M. Bohnké,et al.  New insights on the porous network created during solvent debinding of powder injection-molded (PIM) parts, and its influence on the thermal debinding efficiency , 2021 .

[18]  Jason J. Williams,et al.  Rheology scaling of spherical metal powders dispersed in thermoplastics and its correlation to the extrudability of filaments for 3D printing , 2021 .

[19]  C. Berges,et al.  A novel printable high-speed steel filament: Towards the solution for wear-resistant customized tools by AM alternative , 2021 .

[20]  Piao Gao,et al.  Formability improvement, cracking behavior and control of Y-modified Ti–43Al–4Nb–1Mo-0.1B alloys produced by selective laser melting , 2021 .

[21]  Gurminder Singh,et al.  Copper extrusion 3D printing using metal injection moulding feedstock: Analysis of process parameters for green density and surface roughness optimization , 2020 .

[22]  F. Liou,et al.  Additive manufacturing of copper – H13 tool steel bi-metallic structures via Ni-based multi-interlayer , 2020 .

[23]  D. Siddel,et al.  Microstructure evolution during binder jet additive manufacturing of H13 tool steel , 2020 .

[24]  P. Cheng,et al.  Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene , 2020 .

[25]  C. Emmelmann,et al.  Feasibility study on piston-based feedstock fabrication with Ti-6Al-4V metal injection molding feedstock , 2020 .

[26]  Yaozhong Zhang,et al.  A comprehensive study on fused filament fabrication of Ti-6Al-4V structures , 2020 .

[27]  F. Clemens,et al.  Effect of stearic acid on rheological properties and printability of ethylene vinyl acetate based feedstocks for fused filament fabrication of alumina , 2020, Additive Manufacturing.

[28]  A. Bollero,et al.  Effect of particle size distribution on obtaining novel MnAlC-based permanent magnet composites and flexible filaments for 3D-printing , 2020 .

[29]  E. Olevsky,et al.  Fabrication of ceramic bone scaffolds by solvent jetting 3D printing and sintering: Towards load-bearing applications , 2020 .

[30]  J. Rech,et al.  Design-dependent shrinkage compensation modeling and mechanical property targeting of metal FFF , 2020, Progress in Additive Manufacturing.

[31]  Deqiao Xie,et al.  Study on defect-free debinding green body of ceramic formed by DLP technology , 2020 .

[32]  J. Gonzalez-Gutierrez,et al.  Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel , 2019 .

[33]  J. Gonzalez-Gutierrez,et al.  Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components , 2019, International Journal of Refractory Metals and Hard Materials.

[34]  Jean Pierre Bergmann,et al.  Wire arc additive manufacturing of hot work tool steel with CMT process , 2019, Journal of Materials Processing Technology.

[35]  Jidong Kang,et al.  Interfacial microstructures and mechanical properties of dissimilar titanium alloy and steel friction stir butt-welds , 2019, Journal of Manufacturing Processes.

[36]  J. Gonzalez-Gutierrez,et al.  Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation , 2019, Additive Manufacturing.

[37]  M. Strano,et al.  Rapid surface quality assessment of green 3D printed metal-binder parts , 2019, Journal of Manufacturing Processes.

[38]  J. Schroers,et al.  3D printing metals like thermoplastics: Fused filament fabrication of metallic glasses , 2018, Materials Today.

[39]  J. Gonzalez-Gutierrez,et al.  Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives , 2018, Materials.

[40]  T. Pollock,et al.  3D printing of high-strength aluminium alloys , 2017, Nature.

[41]  Jenn‐Ming Yang,et al.  Nanocrystalline TiC-reinforced H13 steel matrix nanocomposites fabricated by selective laser melting ☆ , 2016 .

[42]  R. German,et al.  Effective Length Scale for Predicting Solvent‐Debinding Times of Components Produced by Powder Injection Molding , 2004 .

[43]  Zemin Wang,et al.  Selective laser melting of dual phase AlCrCuFeNix high entropy alloys: Formability, heterogeneous microstructures and deformation mechanisms , 2020 .