Nanoindentation and scratch resistance of multilayered TiO2-SiO2 coatings with different nanocolumnar structures deposited by PV-OAD

This paper presents a study of the mechanical properties and an evaluation of damage mechanisms of nanocolumnar TiO2-SiO2 multilayer coatings prepared by physical vapour oblique angle deposition at different configurations (slanted, zigzag or chiral) and two zenithal evaporation angles (70° or 85°). The characterization at micro- and nanometric length scales of the mechanical properties of the multilayers has been carried out by nanoindentation and nanoscratch tests, while the morphological evaluation of the surface and sub-surface damages produced with a sharp indenter and the adhesive and/or cohesive failures between coating and substrate have been investigated by field emission scanning electron microscopy and focused ion beam, respectively. The obtained results have shown that the main processing parameters controlling the mechanical response of the different multilayers is the zenithal angle of deposition and the number of layers in the multilayer stack, while the coating architecture had only a minor effect on the mechanical response. This analysis also revealed a higher resistance to scratch testing and a brittle failure behaviour for the low zenithal angle coatings as compared with the high angle ones.

[1]  J. Pierson,et al.  High hardness, low Young's modulus and low friction of nanocrystalline ZrW2 Laves phase and Zr1−xWx thin films , 2012 .

[2]  M. Anglada,et al.  Mechanical characterization of nano-reinforced silica based sol-gel hybrid coatings on AISI 316L stainless steel using nanoindentation techniques , 2009 .

[3]  F. Yubero,et al.  Liquids analysis with optofluidic bragg microcavities. , 2013, ACS applied materials & interfaces.

[4]  Michael J. Brett,et al.  Glancing Angle Deposition of Thin Films: Engineering the Nanoscale , 2014 .

[5]  M. Segarra,et al.  Nanoindentation of multilayered epitaxial YBa2Cu3O7-δ thin films and coated conductors , 2011 .

[6]  Y. Gaillard,et al.  Nanoindentation of TiO2 thin films with different microstructures , 2009 .

[7]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[8]  M. Odén,et al.  Structure, deformation and fracture of arc evaporated Zr-Si-N hard films , 2014 .

[9]  J. Loubet,et al.  A simple guide to determine elastic properties of films on substrate from nanoindentation experiments , 2006, physics/0701121.

[10]  Kazuo Hokkirigawa,et al.  Fracture Mechanisms of Ceramic Coatings in Indentation , 1994 .

[11]  A. Gonzalez-Elipe,et al.  Nanoindentation of nanocolumnar TiO2 thin films with single and stacked zig-zag layers , 2014 .

[12]  M. Segarra,et al.  Study of the mechanical properties of CeO2 layers with the nanoindentation technique , 2009 .

[13]  M. Cantoni,et al.  Effect of deposition angle on the structure and properties of pulsed-DC magnetron sputtered TiAlN thin films , 2011 .

[14]  B. Lawn Partial cone crack formation in a brittle material loaded with a sliding spherical indenter , 1967, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[15]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[16]  Michael J. Brett,et al.  Glancing angle deposition: Fabrication, properties, and applications of micro- and nanostructured thin films , 2007 .

[17]  M. Brett,et al.  Birefringence enhancement in annealed TiO2 thin films , 2007 .

[18]  A. Gonzalez-Elipe,et al.  TiO2–SiO2 one-dimensional photonic crystals of controlled porosity by glancing angle physical vapour deposition , 2010 .

[19]  M. Brett,et al.  Photoluminescence emission profiles of Y(2)O(3) : Eu films composed of high-low density stacks produced by glancing angle deposition. , 2008, Applied optics.

[20]  Fan Zhang,et al.  High-speed optical humidity sensors based on chiral sculptured thin films. , 2011, Sensors and actuators. B, Chemical.

[21]  L. E. Goodman,et al.  The Stress Field Created by a Circular Sliding Contact , 1966 .

[22]  Agustín R. González-Elipe,et al.  Perspectives on oblique angle deposition of thin films: From fundamentals to devices , 2016 .

[23]  Nicholas G. Wakefield,et al.  Selective transmittance of linearly polarized light in thin films rationally designed by FDTD and FDFD theories and fabricated by glancing angle deposition , 2008 .

[24]  Daniel Poitras,et al.  Plasma deposition of optical films and coatings: A review , 2000 .