Automatic sequential injection liquid–liquid micro-extraction system for on-line flame atomic absorption spectrometric determination of trace metal in water samples

[1]  G. Zachariadis,et al.  On-line liquid-liquid extraction system using a new phase separator for flame atomic absorption spectrometric determination of ultra-trace cadmium in natural waters. , 2004, Talanta.

[2]  G. Zachariadis,et al.  Development of an on-line solvent extraction system for electrothermal atomic absorption spectrometry utilizing a new gravitational phase separator. Determination of cadmium in natural waters and urine samples , 2003 .

[3]  B. Welz,et al.  Flow injection on-line dilution for flame atomic absorption spectrometry by micro-sample introduction and dispersion using syringe pumps , 2003 .

[4]  Jianhua Wang,et al.  FI/SI on-line solvent extraction/back extraction preconcentration coupled to direct injection nebulization inductively coupled plasma mass spectrometry for determination of copper and lead , 2002 .

[5]  Claire E Lenehan,et al.  Sequential injection analysis. , 2002, The Analyst.

[6]  E. Hansen,et al.  Development of an automated sequential injection on-line solvent extraction-back extraction procedure as demonstrated for the determination of cadmium with detection by electrothermal atomic absorption spectrometry , 2002 .

[7]  A. Araújo,et al.  Determination of Fe(III) and total Fe in wines by sequential injection analysis and flame atomic absorption spectrometry , 2001 .

[8]  Z. Fang.  Trends of flow injection sample pretreatment approaching the new millennium , 1999 .

[9]  T. Sakai,et al.  New phase separator for extraction-spectrophotometric determination of anionic surfactants with Malachite Green by flow injection analysis. , 1998, Talanta.

[10]  Soulin Lin,et al.  Design and application of a new phase separator for flow injection liquid-liquid extraction , 1996 .

[11]  Z. Fang,et al.  Flow Injection Atomic Absorption Spectrometry , 1995 .

[12]  G. Tao,et al.  On-line flow injection solvent extraction for electrothermal atomic absorption spectrometry: Determination of nickel in biological samples , 1995 .

[13]  H. Hwang,et al.  The design of an on-line flow injection system with a gravitational phase separator for flame atomic absorption spectrometry and its analytical performance. , 1993, Talanta.

[14]  Shang-da Huang,et al.  Determination of copper and cadmium in sea water by preconcentration and electrothermal atomic absorption spectrometry , 1992 .

[15]  L. Danielsson,et al.  Design of a continuous-flow two-step extraction sample work-up system for graphite furnace atomic absorption spectrometry , 1990 .

[16]  J. Ruzicka,et al.  Sequential injection: a new concept for chemical sensors, process analysis and laboratory assays , 1990 .

[17]  G. Christian,et al.  Continuous solvent extraction in a closed-loop system , 1987 .

[18]  M. Oshima,et al.  Spectrophotometric determination of phosphorus as orthophosphate based on solvent extraction of the ion associate of molybdophosphate with malachite green using flow injection , 1987 .

[19]  B. Karlberg,et al.  An automated extraction system for flame atomic absorption spectrometry , 1981 .