Properties prediction for self-compacting concrete incorporating activated fiber and stone chips

[1]  Z. Zhao,et al.  Research progress on lunar and Martian concrete , 2022, Construction and Building Materials.

[2]  Songhe Wang,et al.  Disturbed State Concept–Based Model for the Uniaxial Strain-Softening Behavior of Fiber-Reinforced Soil , 2022, International Journal of Geomechanics.

[3]  Duanyi Wang,et al.  Mesostructural Characteristics and Evaluation of Asphalt Mixture Contact Chain Complex Networks , 2022, SSRN Electronic Journal.

[4]  M. Santamouris,et al.  Performance synergism of pervious pavement on stormwater management and urban heat island mitigation: A review of its benefits, key parameters, and co-benefits approach. , 2022, Water research.

[5]  Hua Huang,et al.  Seismic Behavior of Strengthened RC Columns under Combined Loadings , 2022, Journal of Bridge Engineering.

[6]  Songhe Wang,et al.  Shear Strength and Mesoscopic Characteristics of Basalt Fiber–Reinforced Loess after Dry–Wet Cycles , 2022, Journal of Materials in Civil Engineering.

[7]  Yanhui Guo,et al.  Development of Similar Materials for Liquid-Solid Coupling and Its Application in Water Outburst and Mud Outburst Model Test of Deep Tunnel , 2022, Geofluids.

[8]  Yiming Yang,et al.  Experimental Analysis of Bearing Capacity of Basalt Fiber Reinforced Concrete Short Columns under Axial Compression , 2022, Coatings.

[9]  Z. Zhao,et al.  Crack resistance property of carbon nanotubes-modified concrete , 2022, Magazine of Concrete Research.

[10]  Songhe Wang,et al.  Influence of dry-wet cycles on the strength behavior of basalt-fiber reinforced loess , 2022, Engineering Geology.

[11]  Junbo Sun,et al.  Multi-objective optimisation for mortar containing activated waste glass powder , 2022, Journal of Materials Research and Technology.

[12]  Zhijie Zhu,et al.  Mining-Induced Stress and Ground Pressure Behavior Characteristics in Mining a Thick Coal Seam With Hard Roofs , 2022, Frontiers in Earth Science.

[13]  Yujing Zhao,et al.  Calcined Attapulgite Clay as Supplementary Cementing Material: Thermal Treatment, Hydration Activity and Mechanical Properties , 2022, International Journal of Concrete Structures and Materials.

[14]  Genbao Zhang,et al.  Mixture optimisation for cement-soil mixtures with embedded GFRP tendons , 2022, Journal of Materials Research and Technology.

[15]  Junbo Sun,et al.  A Multi-objective Optimisation Approach for Activity Excitation of Waste Glass Mortar , 2022, Journal of Materials Research and Technology.

[16]  Jinhao Xu,et al.  Tensile and Fracture Properties of Silicon Carbide Whisker-Modified Cement-Based Materials , 2022, International Journal of Concrete Structures and Materials.

[17]  Dongxiao Wu,et al.  Prediction of thermo-mechanical properties of rubber-modified recycled aggregate concrete , 2022, Construction and Building Materials.

[18]  Huawei Tong,et al.  Direct Shear Creep Characteristics of Sand Treated with Microbial-Induced Calcite Precipitation , 2022, International Journal of Civil Engineering.

[19]  Junbo Sun,et al.  Mechanical Performance Prediction for Sustainable High-Strength Concrete Using Bio-Inspired Neural Network , 2022, Buildings.

[20]  M. Nehdi,et al.  Estimating compressive strength of modern concrete mixtures using computational intelligence: A systematic review , 2021, Construction and Building Materials.

[21]  Junbo Sun,et al.  Fracture behavior of a sustainable material: Recycled concrete with waste crumb rubber subjected to elevated temperatures , 2021 .

[22]  Yuhong Wang,et al.  Effects of actual loading waveforms on the fatigue behaviours of asphalt mixtures , 2021 .

[23]  Shukui Liu,et al.  Mechanical, chemical and hydrothermal activation for waste glass reinforced cement , 2021 .

[24]  F. Aslani,et al.  Electromagnetic absorption of copper fiber oriented composite using 3D printing , 2021 .

[25]  Genbao Zhang,et al.  Multi-objective optimisation of a graphite-slag conductive composite applying a BAS-SVR based model , 2021, Journal of Building Engineering.

[26]  Yimiao Huang,et al.  Mechanical enhancement for EMW-absorbing cementitious material using 3D concrete printing , 2021 .

[27]  Genbao Zhang,et al.  Machine-Learning-Aided Prediction of Flexural Strength and ASR Expansion for Waste Glass Cementitious Composite , 2021, Applied Sciences.

[28]  Chunwei Zhang,et al.  The advancement of seismic isolation and energy dissipation mechanisms based on friction , 2021, Soil Dynamics and Earthquake Engineering.

[29]  Yimiao Huang,et al.  Fibre-reinforced lightweight engineered cementitious composites for 3D concrete printing , 2021 .

[30]  Genbao Zhang,et al.  The effect of graphite and slag on electrical and mechanical properties of electrically conductive cementitious composites , 2021 .

[31]  Wei Zhang,et al.  Experimental study on circular steel tube-confined reinforced UHPC columns under axial loading , 2021 .

[32]  Yongqin Li,et al.  Application of deep learning algorithms in geotechnical engineering: a short critical review , 2021, Artificial Intelligence Review.

[33]  A. Goh,et al.  Estimation of diaphragm wall deflections for deep braced excavation in anisotropic clays using ensemble learning , 2021, Geoscience Frontiers.

[34]  Junfei Zhang,et al.  Machine learning-aided design and prediction of cementitious composites containing graphite and slag powder , 2021 .

[35]  Wengang Zhang,et al.  Prediction of undrained shear strength using extreme gradient boosting and random forest based on Bayesian optimization , 2021 .

[36]  Wei Zhang,et al.  Experimental study of predamaged columns strengthened by HPFL and BSP under combined load cases , 2021, Structure and Infrastructure Engineering.

[37]  Qiang Li,et al.  Mechanical and conductive performance of electrically conductive cementitious composite using graphite, steel slag, and GGBS , 2020, Structural Concrete.

[38]  N. Nair,et al.  Research initiatives on the influence of wollastonite in cement-based construction material- A review , 2020 .

[39]  A. F. Angelin,et al.  Evaluation of efficiency factor of a self-compacting lightweight concrete with rubber and expanded clay contents , 2020 .

[40]  Chunwei Zhang,et al.  Performance Assessment of Concrete and Steel Material Models in LS-DYNA for Enhanced Numerical Simulation, A State of the Art Review , 2020 .

[41]  Guowei Ma,et al.  A metaheuristic-optimized multi-output model for predicting multiple properties of pervious concrete , 2020 .

[42]  Jianxin Li,et al.  Machine-learning-assisted shear strength prediction of reinforced concrete beams with and without stirrups , 2020, Engineering with Computers.

[43]  A. Viloria,et al.  Estimating strength properties of geopolymer self-compacting concrete using machine learning techniques , 2020, Journal of Materials Research and Technology.

[44]  Suzanne Lacasse,et al.  State-of-the-art review of soft computing applications in underground excavations , 2020, Geoscience Frontiers.

[45]  R. C. Cecche Lintz,et al.  Fresh and Hardened States of Distinctive Self-Compacting Concrete with Marble- and Phyllite-Powder Aggregate Contents , 2020 .

[46]  Junfei Zhang,et al.  Development of an Ensemble Intelligent Model for Assessing the Strength of Cemented Paste Backfill , 2020 .

[47]  Han-long Liu,et al.  Soft computing approach for prediction of surface settlement induced by earth pressure balance shield tunneling , 2020 .

[48]  F. Aslani,et al.  Mechanical Behavior of Fiber-Reinforced Self-Compacting Rubberized Concrete Exposed to Elevated Temperatures , 2019 .

[49]  Guowei Ma,et al.  Prediction of permeability and unconfined compressive strength of pervious concrete using evolved support vector regression , 2019, Construction and Building Materials.

[50]  G. Ma,et al.  Determination of Young's modulus of jet grouted coalcretes using an intelligent model , 2019, Engineering Geology.

[51]  G. Ma,et al.  Fiber‐reinforced lightweight self‐compacting concrete incorporating scoria aggregates at elevated temperatures , 2019, Structural Concrete.

[52]  Mohammad S. Islam,et al.  Influence of jute fiber on concrete properties , 2018, Construction and Building Materials.

[53]  G. Dwivedi,et al.  Effect of fiber treatment on flexural properties of natural fiber reinforced composites: A review , 2017, Egyptian Journal of Petroleum.

[54]  Shuai Li,et al.  BAS: Beetle Antennae Search Algorithm for Optimization Problems , 2017, ArXiv.

[55]  N. Banthia,et al.  Pull-out behavior of different fibers in geopolymer mortars: effects of alkaline solution concentration and curing , 2017 .

[56]  Mohamed K. Ismail,et al.  Use of metakaolin on enhancing the mechanical properties of self-consolidating concrete containing high percentages of crumb rubber , 2016 .

[57]  Nemkumar Banthia,et al.  Plant-based natural fibre reinforced cement composites: A review , 2016 .

[58]  Thomas A. Bier,et al.  Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC) , 2015 .

[59]  Rahmat Madandoust,et al.  Effects of natural zeolite on the fresh and hardened properties of self-compacted concrete , 2013 .

[60]  Mohammad Shekarchi,et al.  Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash , 2013 .

[61]  Pitthaya Jamsawang,et al.  Use of steel and polypropylene fibers to improve flexural performance of deep soil–cement column , 2012 .

[62]  A. Ashour,et al.  Statistical variations in impact resistance of polypropylene fibre-reinforced concrete. , 2006 .

[63]  J. Brooks,et al.  Effect of admixtures on the setting times of high-strength concrete , 2000 .

[64]  H. Gies,et al.  Detailed investigation of the lattice structure of zeolite ZSM-11 by a combination of solid-state NMR and synchrotron x-ray diffraction techniques , 1989 .