Stepwise Removal Process Analysis Based on Layered Corrosion Oxides

The parts of engineering machinery quickly generate rusty oxides in the working process, which seriously affects their service life and safety. How to remove oxides efficiently without damaging the surface of the matrix is a crucial problem. This paper analyzes the critical laser parameters that affect the distribution of material temperature field, which determines the ablation depth of different oxides, by using the central composite experimental design method and taking the surface-ablation depth of Fe2O3 and Fe3O4 before and after laser cleaning as response variables to establish the prediction model of single removal volume with the help of Comsol Multiphysics software. The results show a positive correlation between ablation depth and peak power density and a negative correlation with scanning speed. In this process, the experimental results show that the prediction model is natural and effective. A flow chart of laser stepwise cleaning of layered corroded oxides can provide theoretical guidance for the laser cleaning of engineering machinery.

[1]  Yang Wang,et al.  Simulation of nanosecond laser cleaning the paint based on the thermal stress , 2021 .

[2]  G. Brabie,et al.  The analysis of high-pressure water jet cutting of thick aluminium alloy 6061-T651 from a statistical perspective , 2020, IOP Conference Series: Materials Science and Engineering.

[3]  G. He,et al.  Research on Cleaning Mechanism of Anti-Erosion Coating Based on Thermal and Force Effects of Laser Shock , 2020, Coatings.

[4]  C. Shen,et al.  Investigation on mechanism of oxide removal and plasma behavior during laser cleaning on aluminum alloy , 2020 .

[5]  Chenwei Wu,et al.  Influence of parameters of a laser cleaning soil rust layer on the surface of ceramic artifacts. , 2019, Applied optics.

[6]  Libing Wang,et al.  Comparison on treatment strategy for chemical cleaning wastewater: Pollutants removal, process design and techno-economic analysis. , 2019, Journal of environmental management.

[7]  Ying-Mao Xie,et al.  Application of thermal stress model to paint removal by Q-switched Nd:YAG laser , 2014 .

[8]  T. S. Mansour,et al.  Laser Cleaning Using Q-Switched Nd:YAG Laser of Low Carbon Steel Alloys , 2014 .

[9]  Lin Li,et al.  Numerical Simulation of Excimer Laser Cleaning of Film and Particle Contaminants , 2013 .

[10]  Salvatore Siano,et al.  Dependence of Nd:YAG laser derusting and passivation of iron artifacts on pulse duration , 2013, Fundamentals of Laser Assisted Micro- and Nanotechnologies.

[11]  Hyun Woo Jeon,et al.  Risk Assessment for Reducing Safety Accidents caused by Construction Machinery , 2013 .

[12]  Lin Li,et al.  Modeling and simulation of laser cleaning of tapered micro-slots with different temporal pulses , 2013 .

[13]  Wiesława Piekarska,et al.  Theoretical investigations into heat transfer in laser-welded steel sheets , 2012, Journal of Thermal Analysis and Calorimetry.

[14]  Pierre Fauchais,et al.  Understanding plasma spraying , 2004 .

[15]  Xiaoyan Zeng,et al.  Parameters and surface performance of laser removal of rust layer on A3 steel , 2003 .

[16]  Sang Jo Lee,et al.  Efficient Chip Breaker Design by Predicting the Chip Breaking Performance , 2001 .

[17]  Ken Watkins,et al.  Mechanisms of laser cleaning , 2000, Advanced High-Power Lasers and Applications.

[18]  Zhiyong Wang,et al.  Research on mechanism and process of paint removal with pulsed fiber laser , 2018 .

[19]  Kleopatra Petroutsatou,et al.  A Thematic Review of Main Researches on Construction Equipment Over the Recent Years , 2016 .

[20]  S. Poli,et al.  Laser Cleaning of Textile Artifacts with Metal Threads: Process Parameter Optimization , 2015 .