Preparation and morphology of polypropylene/wood flour composite foams via extrusion

In this study, polypropylene (PP)/wood flour composites foams with an average cell size lower than 100 μ were successfully produced by extrusion. The effects of the coupling agent (maleated PP), wood flour content (20%, 30%, and 40% weight), initial wood moisture, and blowing agent content on the cell structure are reported. It was found that the addition of a coupling agent increases the blowing agent efficiency and helps to reduce the density of the composites. Moreover, wood moisture appears to be an effective secondary blowing agent under specific conditions. POLYM. COMPOS., 26:731–738, 2005. © 2005 Society of Plastics Engineers

[1]  L. Matuana,et al.  Statistical Modeling and Response Surface Optimization of Extruded HDPE/Wood-Flour Composite Foams , 2004 .

[2]  M. N. Ibrahim,et al.  Effect of wood fibers on the rheological properties of i‐PP/wood fiber composites , 2004 .

[3]  Saeed Doroudiani,et al.  Expanded Wood Fiber Polystyrene Composites: Processing–Structure–Mechanical Properties Relationships , 2004 .

[4]  J. Kenny,et al.  Mechanical characterization of polypropylene–wood flour composites , 2003 .

[5]  Y. Wang,et al.  Comparative study of maleated polyolefins as compatibilizers for polyethylene/wood flour composites , 2003 .

[6]  A. Błędzki,et al.  Microcellular Wood Fibre Reinforced Polypropylene Composites in an Injection Moulding Process , 2002 .

[7]  N. Stark.  Influence of Moisture Absorption on Mechanical Properties of Wood Flour-Polypropylene Composites , 2001 .

[8]  Thomas M. Pontiff.  Foaming Agents for Foam Extrusion , 2000 .

[9]  J. Pinto,et al.  Statistical experimental design and modeling of polypropylene–wood fiber composites , 2000 .

[10]  M. Reedy.  How chemical foaming agents improve performance and productivity , 2000 .

[11]  Thais H. S. Costa,et al.  Performance of polypropylene–wood fiber composites , 1999 .

[12]  J. Balatinecz,et al.  Surface modification and adhesion mechanisms in woodfiber-polypropylene composites , 1999 .

[13]  Chul B. Park,et al.  Cell morphology and property relationships of microcellular foamed pvc/wood‐fiber composites , 1998 .

[14]  B. Liao,et al.  Influence of modified wood fibers on the mechanical properties of wood fiber-reinforced polyethylene , 1997 .

[15]  J. Balatinecz,et al.  Effect of Ester Linkages on the Mechanical Properties of Wood Fiber-Polypropylene Composites , 1997 .

[16]  N. Suh,et al.  Rapid Polymer/Gas Solution Formation for Continuous Production of Microcellular Plastics , 1996 .

[17]  Chul B. Park,et al.  Filamentary extrusion of microcellular polymers using a rapid decompressive element , 1996 .

[18]  B. Riedl,et al.  Reinforcement of Recycled Polyolefins with Wood Fibers , 1992 .