Trimming of 3D solid finite element meshes: sheet metal forming tests and applications

[1]  Luís Menezes,et al.  Mechanical Behaviour and Springback Study of an Aluminium Alloy in Warm Forming Conditions , 2011 .

[2]  R. H. Wagoner,et al.  Fineblanking of high strength steels: Control of material properties for tool life , 2011 .

[3]  Luís Menezes,et al.  Numerical study of springback using the split-ring test for an AA5754 aluminum alloy , 2010 .

[4]  Khemais Saanouni,et al.  Finite element simulation of 3D sheet metal guillotining using advanced fully coupled elastoplastic-damage constitutive equations , 2010 .

[5]  Jacques Besson,et al.  Effect of shear cutting on ductility of a dual phase steel , 2009 .

[6]  Luís Menezes,et al.  Sensitivity study on some parameters in blank design , 2009 .

[7]  Luís Menezes,et al.  Blank design for deep drawn parts using parametric NURBS surfaces , 2009 .

[8]  Said Ahzi,et al.  Finite elements simulations of thin copper sheets blanking: Study of blanking parameters on sheared edge quality , 2008 .

[9]  Luís Menezes,et al.  Study on the Influence of the Refinement of a 3‐D Finite Element Mesh in Springback Evaluation of Plane‐Strain Channel Sections , 2007 .

[10]  Luís Menezes,et al.  Study on the influence of work-hardening modeling in springback prediction , 2007 .

[11]  Luís Menezes,et al.  Trimming of 3D solid finite element meshes using parametric surfaces: application to sheet metal forming , 2006 .

[12]  Somnath Ghosh,et al.  3D modeling of shear-slitting process for aluminum alloys , 2005 .

[13]  Luís Menezes,et al.  Application of the Incremental Volumetric Remapping Method in the Simulation of Multi‐Step Deep Drawing Processes , 2005 .

[14]  Luís Menezes,et al.  Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes , 2005 .

[15]  Luís Menezes,et al.  An advanced constitutive model in the sheet metal forming simulation: the Teodosiu microstructural model and the Cazacu Barlat yield criterion , 2004 .

[16]  Luís Menezes,et al.  Improvement of a frictional contact algorithm for strongly curved contact problems , 2003 .

[17]  Albert Van Bael,et al.  Finite element modeling of plastic anisotropy induced by texture and strain-path change , 2003 .

[18]  Yinghong Peng,et al.  Fine-blanking process simulation by rigid viscous-plastic FEM coupled with void damage , 2003 .

[19]  Tae-Hoon Choi,et al.  Application of intelligent design support system for multi-step deep drawing process , 2002 .

[20]  Dong-Yol Yang,et al.  Integration of CAD/CAM/CAE/RP for the development of metal forming process , 2002 .

[21]  Guido Dhondt,et al.  A new automatic hexahedral mesher based on cutting , 2001 .

[22]  Mahmoud Y. Demeri,et al.  A Benchmark Test for Springback Simulation in Sheet Metal Forming , 2000 .

[23]  Marcelo Gattass,et al.  INTERSECTING AND TRIMMING PARAMETRIC MESHES ON FINITE-ELEMENT SHELLS , 2000 .

[24]  A. Makinouchi,et al.  Simulation of multi-step sheet metal forming processes by a static explicit FEM code , 1998 .

[25]  T. Hughes.  Generalization of selective integration procedures to anisotropic and nonlinear media , 1980 .

[26]  J. Rice,et al.  Finite-element formulations for problems of large elastic-plastic deformation , 1975 .

[27]  Y. Yamada,et al.  Plastic stress-strain matrix and its application for the solution of elastic-plastic problems by the finite element method , 1968 .

[28]  J. L. Alves,et al.  ONE STEP SPRINGBACK STRATEGIES IN SHEET METAL FORMING , 2002 .

[29]  R. H. Wagoner,et al.  Simulation of springback , 2002 .

[30]  Luís Menezes,et al.  Three-dimensional numerical simulation of the deep-drawing process using solid finite elements , 2000 .