A New Technique to Equalize Branch Currents in Multiarray LED Lamps Based on Variable Inductors

In this paper, a new technique to equalize light-emitting diode (LED) currents in multiarray LED lamps is proposed. The current through the LEDs is controlled by changing the inductance of a variable inductor. The proposed technique can be employed to control the current through each LED branch independently. The operation principle of this technique and a design example of the proposed system are presented in detail in this paper. As an example, a forward converter has been selected to supply the LED branches, which can be designed to operate with one or several outputs. The component values of the converter as well as the LED current control circuit are also calculated as a design example. A prototype of the circuit has been implemented. The experimental results obtained at the laboratory are satisfactory and in accordance to the proposed design methodology. The proposed technique can prove to be very cost-effective for LED drivers in the range of 100 W and beyond with multiple independent LED arrays.

[1]  K. I. Hwu,et al.  A Simple Current-Balancing Converter for LED Lighting , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[2]  John J. Sammarco,et al.  Measuring the Effects of Lighting Distribution on Walking Speed and Head Pitch With Wearable Inertial Measurement Units , 2014, IEEE Transactions on Industry Applications.

[3]  Javier Sebastian,et al.  High-Efficiency LED Driver Without Electrolytic Capacitor for Street Lighting , 2013 .

[4]  Jianfeng Wang,et al.  A novel high efficiency and low-cost current balancing method for multi-LED driver , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[5]  Marco A. Dalla Costa,et al.  Investigation of a New Control Strategy for Electronic Ballasts Based on Variable Inductor , 2008, IEEE Transactions on Industrial Electronics.

[6]  E. S. Saraiva,et al.  Analysis, Design, and Experimentation on Constant-Frequency DC-DC Resonant Converters With Magnetic Control , 2012, IEEE Transactions on Power Electronics.

[7]  Henry Shu-Hung Chung,et al.  Use of Daisy-Chained Transformers for Current-Balancing Multiple LED Strings , 2014, IEEE Transactions on Power Electronics.

[8]  Alexandre Campos,et al.  Offline LED Driver for Street Lighting With an Optimized Cascade Structure , 2013, IEEE Transactions on Industry Applications.

[9]  Hyun-Chang Kim,et al.  A Single-Inductor, Multiple-Channel Current-Balancing LED Driver for Display Backlight Applications , 2013, IEEE Transactions on Industry Applications.

[10]  R. Zane,et al.  LED Driver Circuit with Series-Input-Connected Converter Cells Operating in Continuous Conduction Mode , 2010, IEEE Transactions on Power Electronics.

[11]  Milan M. Jovanovic,et al.  A new current-balancing method for paralleled LED strings , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[12]  Chun-An Cheng,et al.  A Novel Single-Stage HPF Electronic Ballast With Coupled Inductors for Fluorescent Lamps , 2014, IEEE Transactions on Industry Applications.

[13]  M. Meneghini,et al.  Degradation Mechanisms of High-Power LEDs for Lighting Applications: An Overview , 2014, IEEE Transactions on Industry Applications.

[14]  Chi K. Tse,et al.  An Improved LCLC Current-Source-Output Multistring LED Driver With Capacitive Current Balancing , 2015, IEEE Transactions on Power Electronics.

[15]  Marco A. Dalla Costa,et al.  An optimized methodology for LED lighting systems designers , 2012, 2012 IEEE Industry Applications Society Annual Meeting.

[16]  D. G. Lamar,et al.  High-Efficiency LED Driver Without Electrolytic Capacitor for Street Lighting , 2013, IEEE Transactions on Industry Applications.

[17]  M. Rico-Secades,et al.  A Universal-Input Single-Stage High-Power-Factor Power Supply for HB-LEDs Based on Integrated Buck-Flyback Converter , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[18]  Chun-An Cheng,et al.  A Novel Single-Stage High-Power-Factor LED Street-Lighting Driver With Coupled Inductors , 2014 .

[19]  Wu Chen,et al.  A Dimmable Light-Emitting Diode (LED) Driver With Mag-Amp Postregulators for Multistring Applications , 2011, IEEE Transactions on Power Electronics.

[20]  J. Sebastian,et al.  Design and experimental results of an input-current-shaper based electronic ballast , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[21]  Marty Cole,et al.  Solid state lighting: The new normal in lighting , 2013, PCIC Europe 2013.

[22]  J. M. Alonso,et al.  Solid-State Lighting: A System Review , 2013, IEEE Industrial Electronics Magazine.

[23]  Chi K. Tse,et al.  A current balancing scheme with high luminous efficiency for high power LED lighting , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[24]  Yu-Kang Lo,et al.  LED driver with a combined energy transfer inductor for current balancing , 2014, 2014 International Conference on Intelligent Green Building and Smart Grid (IGBSG).

[25]  Sean Gallagher,et al.  Comparative Evaluation of Light-Emitting Diode Cap Lamps With an Emphasis on Visual Performance in Mesopic Lighting Conditions , 2014, IEEE Transactions on Industry Applications.

[26]  T. Driscoll,et al.  The lighting revolution: If we were experts before, we're novices now , 2012, 2012 Petroleum and Chemical Industry Conference (PCIC).

[27]  Marco A. Dalla Costa,et al.  Comparative Analysis and Experiments of Resonant Tanks for Magnetically Controlled Electronic Ballasts , 2008, IEEE Transactions on Industrial Electronics.

[28]  Chun-An Cheng,et al.  A Novel Single-Stage High-Power-Factor LED Street-Lighting Driver With Coupled Inductors , 2014, IEEE Transactions on Industry Applications.

[29]  José Marcos Alonso Alvarez,et al.  A Universal-Input Single-Stag2e High-Power-Factor Power Supply for HB-LEDs Based on Integrated Buck–Flyback Converter , 2011, IEEE Transactions on Industrial Electronics.