Effect of cobalt on precipitation in Fe-Cr-Co-Mo-Ni-C stainless steels

[1]  I. Nikitin,et al.  Nucleation of W-rich carbides and Laves phase in a Re-containing 10% Cr steel during creep at 650 °C , 2020 .

[2]  Zhen-bao Liu,et al.  Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel , 2020 .

[3]  Zhou-hua Jiang,et al.  Role of Co in formation of Ni-Ti clusters in maraging stainless steel , 2018, Journal of Materials Science & Technology.

[4]  H. Bhadeshia,et al.  A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale β-NiAl and Laves phase precipitates , 2018 .

[5]  G. Sha,et al.  Non-uniform phase separation in ferrite of a duplex stainless steel , 2017 .

[6]  A. Fedoseeva,et al.  Effect of alloying on interfacial energy of precipitation/matrix in high-chromium martensitic steels , 2017, Journal of Materials Science.

[7]  Wei Yan,et al.  Three dimensional atom probe and first-principles studies on spinodal decomposition of Cr in a Co-alloyed maraging stainless steel , 2016 .

[8]  G. Eggeler,et al.  The nucleation of Mo-rich Laves phase particles adjacent to M23C6 micrograin boundary carbides in 12% Cr tempered martensite ferritic steels , 2015 .

[9]  M. Mathon,et al.  Cementite-free martensitic steels: A new route to develop high strength/high toughness grades by modifying the conventional precipitation sequence during tempering , 2012 .

[10]  H. Henein,et al.  Matrix Dissolution Techniques Applied to Extract and Quantify Precipitates from a Microalloyed Steel , 2011 .

[11]  V. Titov,et al.  Intermetallic R-phase in maraging steels of the Fe-Cr-Ni-Co-Mo system , 2006 .

[12]  Y. Kimura,et al.  Precipitation of the Icosahedral Quasicrystalline Phase, R-phase and Laves Phase in Ferritic Alloys , 2004 .

[13]  Wei Sha,et al.  Quantification of precipitation hardening and evolution of precipitates , 2002 .

[14]  L. Lundin.  Direct measurement of carbon solubility in the intermetallic (Fe,Cr)2(Mo,W) Laves phase using atom-probe field-ion microscopy , 1996 .

[15]  P. Rivera-Díaz-del-Castillo,et al.  Understanding the factors controlling the hardness in martensitic steels , 2016 .

[16]  L. F. Porter,et al.  Strength and toughness of Fe-10ni alloys containing C, Cr, Mo, and Co , 1973 .