Solar PV-Powered SRM Drive for EVs With Flexible Energy Control Functions

Electric vehicles (EVs) provide a feasible solution to reduce greenhouse gas emissions and thus become a hot topic for research and development. Switched reluctance motors (SRMs) are one of the promised motors for EV applications. In order to extend the EVs' driving miles, the use of photovoltaic (PV) panels on the vehicle helps to decrease the reliance on vehicle batteries. Based on the phase winding characteristics of SRMs, a tri-port converter is proposed in this paper to control the energy flow among the PV panel, battery, and SRM. Six operating modes are presented, four of which are developed for driving and two for standstill onboard charging. In the driving modes, the energy decoupling control for maximum power point tracking (MPPT) of the PV panel and speed control of the SRM are realized. In the standstill charging modes, a grid-connected charging topology is developed without a need for external hardware. When the PV panel directly charges the battery, a multisection charging control strategy is used to optimize energy utilization. Simulation results based on MATLAB/Simulink and experiments prove the effectiveness of the proposed tri-port converter, which have potential economic implications to improve the market acceptance of EVs.

[1]  Shuang Zhao,et al.  An Integrated 20-kW Motor Drive and Isolated Battery Charger for Plug-In Vehicles , 2013, IEEE Transactions on Power Electronics.

[2]  Mats Alaküla,et al.  Grid-Connected Integrated Battery Chargers in Vehicle Applications: Review and New Solution , 2013, IEEE Transactions on Industrial Electronics.

[3]  Mats Alaküla,et al.  An Isolated High-Power Integrated Charger in Electrified-Vehicle Applications , 2011, IEEE Transactions on Vehicular Technology.

[4]  Sheldon S. Williamson,et al.  Power-Electronics-Based Solutions for Plug-in Hybrid Electric Vehicle Energy Storage and Management Systems , 2010, IEEE Transactions on Industrial Electronics.

[5]  Stephen J. Finney,et al.  Central-Tapped Node Linked Modular Fault-Tolerance Topology for SRM Applications , 2016, IEEE Transactions on Power Electronics.

[6]  Bimal K. Bose,et al.  Global Energy Scenario and Impact of Power Electronics in 21st Century , 2013, IEEE Transactions on Industrial Electronics.

[7]  Wenping Cao,et al.  New SR Drive With Integrated Charging Capacity for Plug-In Hybrid Electric Vehicles (PHEVs) , 2014, IEEE Transactions on Industrial Electronics.

[8]  Hans Bernhoff,et al.  Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review , 2012, IEEE Transactions on Vehicular Technology.

[9]  Ka Wai Eric Cheng,et al.  Multi-Objective Optimization Design of In-Wheel Switched Reluctance Motors in Electric Vehicles , 2010, IEEE Transactions on Industrial Electronics.

[10]  Chang-Ming Liaw,et al.  Development of a Compact Switched-Reluctance Motor Drive for EV Propulsion With Voltage-Boosting and PFC Charging Capabilities , 2009, IEEE Transactions on Vehicular Technology.

[11]  David G. Dorrell,et al.  Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An Overview , 2014, IEEE Transactions on Industrial Electronics.

[12]  Ali Emadi,et al.  Comprehensive Evaluation of the Dynamic Performance of a 6/10 SRM for Traction Application in PHEVs , 2013, IEEE Transactions on Industrial Electronics.

[13]  Ali Emadi,et al.  Advanced Integrated Bidirectional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Vehicles , 2009, IEEE Transactions on Vehicular Technology.

[14]  Moon-Young Kim,et al.  A Modularized Charge Equalizer Using a Battery Monitoring IC for Series-Connected Li-Ion Battery Strings in Electric Vehicles , 2013, IEEE Transactions on Power Electronics.

[15]  Chang-Ming Liaw,et al.  An Integrated Driving/Charging Switched Reluctance Motor Drive Using Three-Phase Power Module , 2011, IEEE Transactions on Industrial Electronics.

[16]  Kaushik Rajashekara,et al.  Power Electronics and Motor Drives in Electric, Hybrid Electric, and Plug-In Hybrid Electric Vehicles , 2008, IEEE Transactions on Industrial Electronics.

[17]  S. Dusmez,et al.  Comprehensive Topological Analysis of Conductive and Inductive Charging Solutions for Plug-In Electric Vehicles , 2012, IEEE Transactions on Vehicular Technology.

[18]  Alon Kuperman,et al.  Battery Charger for Electric Vehicle Traction Battery Switch Station , 2013, IEEE Transactions on Industrial Electronics.

[19]  S. Ogasawara,et al.  Consideration of Number of Series Turns in Switched-Reluctance Traction Motor Competitive to HEV IPMSM , 2012, IEEE Transactions on Industry Applications.

[20]  Jing Zhao,et al.  Magnetic Characteristics Investigation of an Axial-Axial Flux Compound-Structure PMSM Used for HEVs , 2010, IEEE Transactions on Magnetics.

[21]  P. T. Krein,et al.  Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles , 2013, IEEE Transactions on Power Electronics.

[22]  Frank C. Walsh,et al.  Energy and Battery Management of a Plug-In Series Hybrid Electric Vehicle Using Fuzzy Logic , 2011, IEEE Transactions on Vehicular Technology.

[23]  Sheng-Ming Yang,et al.  Controlled Dynamic Braking for Switched Reluctance Motor Drives With a Rectifier Front End , 2013, IEEE Transactions on Industrial Electronics.

[24]  S. Ogasawara,et al.  Test Results and Torque Improvement of the 50-kW Switched Reluctance Motor Designed for Hybrid Electric Vehicles , 2012, IEEE Transactions on Industry Applications.

[25]  Olivier Bethoux,et al.  Space-Vector PWM Control Synthesis for an H-Bridge Drive in Electric Vehicles , 2013, IEEE Transactions on Vehicular Technology.

[26]  Youtong Fang,et al.  Tri-port converter for flexible energy control of PV-fed electric vehicles , 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).