2D numerical simulations of ice rubble formation process against an inclined structure

Abstract This paper examines ice sheet failure and rubble pile formation process against a wide inclined structure by simulating the process with a two dimensional combined finite–discrete element method. In particular, rubble pile formation and deformation, as well as extreme ice load events are addressed. In the method used, the level ice sheet and its fracture are modeled by using a finite element scheme, while the contact forces between the colliding ice blocks are calculated by using the discrete element method. A total of 28 peak load cases are analyzed in detail and the phenomena during these peak load events are described. Peak loads are noticed to occur in the cases of ice ride-up, formation of a sail in front or away from the structure, and loading through a rubble pile. The common phenomenon in these four peak load situations was the loading of the rubble pile in a manner that a part of the pile is pushed upwards.

[1]  G. Timco,et al.  Compressive strength of sea ice sheets , 1990 .

[2]  Garry Timco,et al.  Ice loads on the Molikpaq in the Canadian Beaufort Sea , 2003 .

[3]  J. P. Dempsey,et al.  Scale effects on the in-situ tensile strength and fracture of ice. Part II: First-year sea ice at Resolute, N.W.T. , 1999 .

[4]  Arttu Polojärvi,et al.  Rubble pile formation against an inclined structure analysis of simulation results , 2010 .

[5]  A. Munjiza,et al.  NBS contact detection algorithm for bodies of similar size , 1998 .

[6]  Arttu Polojärvi,et al.  2D combined finite‐discrete element method to model multi‐fracture of beam structures , 2009 .

[7]  Garry Timco,et al.  Ice loads on the caisson structures in the Canadian Beaufort Sea , 2004 .

[8]  Arttu Polojärvi,et al.  Simulation of Ice Pile-Up Process with 2D Combined Finite-Discrete Element Method , 2009 .

[9]  Qingbin Li,et al.  Transient elastic wave propagation in an infinite Timoshenko beam on viscoelastic foundation , 2003 .

[10]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[11]  Juha Kuutti,et al.  FE-Simulation of Continuous Ice Failure Based on Model Update Technique , 2009 .

[12]  Ben Lishman,et al.  The Rate- and State- Dependence of Sea Ice Friction , 2009 .

[13]  Garry Timco,et al.  A review of the engineering properties of sea ice , 2010 .

[14]  Arttu Polojärvi,et al.  3D discrete numerical modelling of ridge keel punch through tests , 2009 .

[16]  A. Munjiza.  The Combined Finite-Discrete Element Method , 2004 .

[17]  Ron Kwok,et al.  Elastic‐decohesive constitutive model for sea ice , 2006 .

[18]  Mark A. Hopkins,et al.  Numerical Simulation of Systems of Multitudinous Polygonal Blocks , 1992 .

[19]  Arttu Polojärvi,et al.  DISCRETE ELEMENT SIMULATION OF ICE PILE-UP AGAINST AN INCLINED STRUCTURE , 2006 .

[20]  T. J. O. Sanderson,et al.  Ice Mechanics: Risks to Offshore Structures , 1988 .

[21]  Arne Gürtner,et al.  Study of Dynamic Ice and Cylindrical Structure Interaction by the Cohesive Element Method , 2009 .

[22]  Mark A. Hopkins,et al.  Onshore ice pile-up: a comparison between experiments and simulations , 1997 .