Microstructure and hydrothermal ageing of alumina-zirconia composites modified by laser engraving

[1]  Yong Ma,et al.  Microstructural characterization of nanostructured Al2O3-ZrO2 eutectic layer by laser rapid solidification method , 2019, Applied Surface Science.

[2]  Yong Ma,et al.  Nucleation and epitaxial growth of highly textured Al2O3–ZrO2 nanoeutectic rapidly solidified from oxyacetylene flame remelting , 2018, Ceramics International.

[3]  Gang Wang,et al.  Femtosecond laser-induced periodic surface microstructure on dental zirconia ceramic , 2018, Materials Letters.

[4]  F. Mücklich,et al.  Mechanical reliability of dental grade zirconia after laser patterning. , 2018, Journal of the mechanical behavior of biomedical materials.

[5]  K. Wegener,et al.  Ultrashort-pulsed laser machining of dental ceramic implants , 2018, Journal of the European Ceramic Society.

[6]  T. Kumpulainen,et al.  The effects of laser patterning 10CeTZP-Al2O3 nanocomposite disc surfaces: Osseous differentiation and cellular arrangement in vitro , 2018, Ceramics International.

[7]  M. H. Fernandes,et al.  Femtosecond laser microstructured Alumina toughened Zirconia: A new strategy to improve osteogenic differentiation of hMSCs , 2018 .

[8]  M. Alini,et al.  Femtosecond laser multi-patterning of zirconia for screening of cell-surface interactions , 2018 .

[9]  Filipe S. Silva,et al.  Bond strength enhancement of zirconia-porcelain interfaces via Nd:YAG laser surface structuring. , 2018, Journal of the mechanical behavior of biomedical materials.

[10]  L. Grémillard,et al.  The influence of stresses on ageing kinetics of 3Y- and 4Y- stabilized zirconia , 2018 .

[11]  F. Mücklich,et al.  Nanosecond-laser patterning of 3Y-TZP: Damage and microstructural changes , 2017 .

[12]  F. Mücklich,et al.  Low temperature degradation of laser patterned 3Y-TZP: Enhancement of resistance after thermal treatment , 2017 .

[13]  J. Matinlinna,et al.  The evaluation of prepared microgroove pattern by femtosecond laser on alumina-zirconia nano-composite for endosseous dental implant application , 2016, Lasers in Medical Science.

[14]  F. Müller,et al.  New ZrO2/Al2O3 Nanocomposite Fabricated from Hybrid Nanoparticles Prepared by CO2 Laser Co-Vaporization , 2016, Scientific Reports.

[15]  B. Yilbas.  Laser treatment of zirconia surface for improved surface hydrophobicity , 2015 .

[16]  Zhijian Shen,et al.  Laser sintering of ceramics , 2013 .

[17]  S. Fiedler,et al.  Machining of Biocompatible Ceramics with Femtosecond Laser Pulses , 2013, Biomedizinische Technik. Biomedical engineering.

[18]  C. Kan,et al.  A new modified laser pretreatment for porcelain zirconia bonding. , 2013, Dental materials : official publication of the Academy of Dental Materials.

[19]  J. Lawrence,et al.  Characterization and compositional study of a ZrO2 engineering ceramic irradiated with a fibre laser beam , 2011 .

[20]  R. I. Merino,et al.  Processing and microstructural study of surface laser remelted Al2O3–YSZ–YAG eutectic plates , 2011 .

[21]  S. Ban,et al.  Surface damages of zirconia by Nd:YAG dental laser irradiation. , 2010, Dental materials journal.

[22]  Sylvain Deville,et al.  Low-Temperature Degradation of Zirconia and Implications for Biomedical Implants , 2007 .

[23]  J. Hellmann,et al.  Solid Solubility and Precipitation in a Single‐Crystal Alumina–Zirconia System , 2004 .

[24]  B. Kear,et al.  Metastable Phase Formation in Plasma‐Sprayed ZrO2 (Y2O3)–Al2O3 , 2003 .

[25]  B. Wolff-Rottke,et al.  Nanosecond and femtosecond excimer-laser ablation of oxide ceramics , 1995 .

[26]  E. Hontzopoulos,et al.  Excimer laser surface treatment of bulk ceramics , 1991 .

[27]  E. W. Stryland,et al.  Diffusion of color centers generated by two‐photon absorption at 532 nm in cubic zirconia , 1990 .

[28]  P. Nicholson,et al.  Phase Analysis in Zirconia Systems , 1972 .

[29]  T. Oberbach,et al.  A fast, stepwise procedure to assess time-temperature equivalence for hydrothermal ageing of zirconia-based materials , 2018 .

[30]  F. Mücklich,et al.  A parametric study of laser interference surface patterning of dental zirconia: Effects of laser parameters on topography and surface quality. , 2017, Dental materials : official publication of the Academy of Dental Materials.

[31]  B. Doloi,et al.  Nd:YAG Laser Marking on Zirconia Ceramic , 2015 .

[32]  G. Gómez-Moreno,et al.  Femtosecond laser microstructuring of zirconia dental implants. , 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

[33]  S. Tekeli.  The solid solubility limit of Al2O3 and its effect on densification and microstructural evolution in cubic-zirconia used as an electrolyte for solid oxide fuel cell , 2007 .