Perforation mechanics of 2024 aluminium protective plates subjected to impact by different nose shapes of projectiles

Abstract This paper focuses on the mechanical behaviour of aluminium alloy 2024-T351 under impact loading. This study has been carried out combining experimental and numerical techniques. Firstly, experimental impact tests were conducted on plates of 4 mm of thickness covering impact velocities from 50 m/s to 200 m/s and varying the stress state through the projectile nose shape: conical, hemispherical and blunt. The mechanisms behind the perforation process were studied depending on the projectile configuration used by analyzing the associated failure modes and post-mortem deflection. Secondly, a numerical study of the mechanical behaviour of aluminium alloy 2024-T351 under impact loading was conducted. To this end, a three-dimensional model was developed in the finite element solver ABAQUS/Explicit. This model combines Lagrangian elements with Smoothed Particle Hydrodynamics (SPH) elements. A good correlation was obtained between numerical and experimental results in terms of residual and ballistic limit velocities.

[1]  T. W. Ipson,et al.  Ballistic Perforation Dynamics , 1963 .

[2]  A. Jarraya,et al.  Finite element implementation of an orthotropic plasticity model for sheet metal in low velocity impact simulations , 2015 .

[3]  L. Xue.  Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading , 2007 .

[4]  Marcello Papini,et al.  Finite element analysis of single impacts of angular particles on ductile targets , 2009 .

[5]  A. Arias,et al.  A hyperelastic-thermoviscoplastic constitutive model for semi-crystalline polymers: Application to PEEK under dynamic loading conditions , 2017 .

[6]  Vemuri Madhu,et al.  Normal and oblique impact of a kinetic energy projectile on mild steel plates , 1992 .

[7]  Odd Sture Hopperstad,et al.  Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and conical noses: Part II: numerical simulations , 2002 .

[8]  A. Rusinek,et al.  Effect of projectile nose shape on ballistic resistance of interstitial-free steel sheets , 2015 .

[9]  Tomasz Wierzbicki,et al.  On the ballistic resistance of double-layered steel plates: An experimental and numerical investigation , 2007 .

[10]  T. Wierzbicki,et al.  Numerical study on crack propagation in high velocity perforation , 2005 .

[11]  Alexis Rusinek,et al.  Influence of projectile shape on dynamic behavior of steel sheet subjected to impact and perforation , 2013 .

[12]  M. Rodríguez-Millán,et al.  Failure behavior of 2024-T3 aluminum under tension-torsion conditions , 2015 .

[13]  Thomas Pardoen,et al.  Anisotropic ductile fracture of Al 2024 alloys , 2008 .

[14]  A. Rusinek,et al.  Development of an experimental set-up for dynamic force measurements during impact and perforation, coupling to numerical simulations , 2016 .

[15]  Mohd. Ashraf Iqbal,et al.  Ballistic Limit of Single and Layered Aluminium Plates , 2011 .

[16]  Ramón Zaera,et al.  Experimental and numerical analysis of the martensitic transformation in AISI 304 steel sheets subjected to perforation by conical and hemispherical projectiles , 2013 .

[17]  Yingbin Bao,et al.  Prediction of ductile crack formation in uncracked bodies , 2003 .

[18]  G. R. Johnson,et al.  SPH for high velocity impact computations , 1996 .

[19]  T. Wierzbicki,et al.  Evaluation of six fracture models in high velocity perforation , 2006 .

[20]  M. Rodríguez-Millán,et al.  Experimental Study on the Perforation Process of 5754-H111 and 6082-T6 Aluminium Plates Subjected to Normal Impact by Conical, Hemispherical and Blunt Projectiles , 2014 .

[21]  S. Dey,et al.  The effect of target strength on the perforation of steel plates using three different projectile nose shapes , 2004 .

[22]  Hongfu Qiang,et al.  Coupling of smoothed particle hydrodynamics and finite element method for impact dynamics simulation , 2011 .

[23]  M. Langseth,et al.  Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates , 2003 .

[24]  M. Papini,et al.  Material deformation and removal due to single particle impacts on ductile materials using smoothed particle hydrodynamics , 2012 .

[25]  Rade Vignjevic,et al.  Development of lagrangian hydrocode modelling for debris impact damage prediction , 1997 .

[26]  G. R. Johnson,et al.  Linking of Lagrangian particle methods to standard finite element methods for high velocity impact computations , 1994 .

[27]  N. Gupta,et al.  Ballistic resistance of 2024 aluminium plates against hemispherical, sphere and blunt nose projectiles , 2017 .

[28]  Magnus Langseth,et al.  Perforation of AA5083-H116 aluminium plates with conical-nose steel projectiles—experimental study , 2004 .

[29]  G. R. Johnson,et al.  A Combined Particle-element Method for High-velocity Impact Computations☆ , 2013 .

[30]  Ramón Zaera,et al.  Experimental and numerical study on the perforation process of mild steel sheets subjected to perpendicular impact by hemispherical projectiles , 2009 .

[31]  Marco Giglio,et al.  An experimental–numerical investigation on aluminium tubes subjected to ballistic impact with soft core 7.62 ball projectiles , 2013 .

[32]  A. Rusinek,et al.  Mechanical impact behavior of polyether–ether–ketone (PEEK) , 2015 .

[33]  G. S. Sekhon,et al.  Experimental and numerical studies on the behavior of thin aluminum plates subjected to impact by blunt- and hemispherical-nosed projectiles , 2006 .

[34]  A. Rusinek,et al.  Thermo-viscoplastic behaviour of 2024-T3 aluminium sheets subjected to low velocity perforation at different temperatures , 2011 .

[35]  A. Rusinek,et al.  A numerical analysis of the dynamic behaviour of sheet steel perforated by a conical projectile under ballistic conditions , 2013 .

[36]  A. Rusinek,et al.  Influence of conical projectile diameter on perpendicular impact of thin steel plate , 2008 .

[37]  A. Arias,et al.  Numerical simulations of impact behaviour of thin steel plates subjected to cylindrical, conical and hemispherical non-deformable projectiles , 2008 .