Characterization and electrical properties of chemical vapor deposited ferroelectric lead titanate films on titanium

Lead titanate thin films were deposited on titanium substrates by a chemical vapor deposition (CVD) process involving the application of vapor mixtures of Pb, ethyl titanate (Ti(C/sub 2/H/sub 5/O)/sub 4/), and oxygen. Auger electron spectroscopy (AES) analyses were performed to determine the chemical composition of lead titanate films. AES analysis revealed that TiO/sub 2/ and TiO interlayers formed between the PbTiO/sub 3/ and titanium substrate. AES also showed that stoichiometry was obtained in the lead titanate film deposited at 750 degrees C, Ti(C/sub 2/H/sub 2/O)/sub 4/ with 0.152, an O/sub 2/ partial pressure of 0.06 atm, and a gas flow rate of 800 sccm. The lead titanate with a stoichiometric composition has a DC conductivity of 3.2*10/sup -12/ Omega /sup -1/-cm/sup -1/ at room temperature. The nonsaturating loops observed in the present investigation may be caused by TiO/sub 2/ and TiO layers between the conductive substrate and the PbTiO/sub 3/ ferroelectric film. The ferroelectric properties of the stoichiometric PbTiO/sub 3/ film included a remanent polarization of 14.1 mu C/cm/sup 3/ and a coercive field of 20.16 kV/cm.<<ETX>>