Within subject heterogeneity in tissue-level post-yield mechanical and material properties in human trabecular bone.

[1]  D. Bernoulli,et al.  Novel method to analyze post-yield mechanical properties at trabecular bone tissue level. , 2013, Journal of the mechanical behavior of biomedical materials.

[2]  Ralph Müller,et al.  Towards patient‐specific material modeling of trabecular bone post‐yield behavior , 2013, International journal for numerical methods in biomedical engineering.

[3]  J. McGarry,et al.  Experimental and numerical characterisation of the elasto-plastic properties of bovine trabecular bone and a trabecular bone analogue. , 2012, Journal of the mechanical behavior of biomedical materials.

[4]  R. Müller,et al.  A new device and method for measuring the elastic modulus of single trabeculae. , 2011, Medical engineering & physics.

[5]  G. Schitter,et al.  Local strain and damage mapping in single trabeculae during three-point bending tests. , 2011, Journal of the mechanical behavior of biomedical materials.

[6]  P. Thurner,et al.  Mechanical properties of single bovine trabeculae are unaffected by strain rate. , 2011, Journal of biomechanics.

[7]  F Peyrin,et al.  Determination of the heterogeneous anisotropic elastic properties of human femoral bone: from nanoscopic to organ scale. , 2010, Journal of biomechanics.

[8]  Milan Jirásek,et al.  A nonlocal constitutive model for trabecular bone softening in compression , 2010, Biomechanics and modeling in mechanobiology.

[9]  P. Zysset,et al.  Rehydration of vertebral trabecular bone: influences on its anisotropy, its stiffness and the indentation work with a view to age, gender and vertebral level. , 2010, Bone.

[10]  M. Swain,et al.  Nanoindentation of wet and dry compact bone: Influence of environment and indenter tip geometry on the indentation modulus , 2010 .

[11]  P. McHugh,et al.  Comparison of trabecular bone behavior in core and whole bone samples using high-resolution modeling of a vertebral body , 2010, Biomechanics and modeling in mechanobiology.

[12]  Georg N Duda,et al.  Increased calcium content and inhomogeneity of mineralization render bone toughness in osteoporosis: mineralization, morphology and biomechanics of human single trabeculae. , 2009, Bone.

[13]  P. Thurner.  Atomic force microscopy and indentation force measurement of bone. , 2009, Wiley interdisciplinary reviews. Nanomedicine and nanobiotechnology.

[14]  T. Keaveny,et al.  The influence of boundary conditions and loading mode on high-resolution finite element-computed trabecular tissue properties. , 2009, Bone.

[15]  Joseph M. Wallace,et al.  Inbred Strain-Specific Response to Biglycan Deficiency in the Cortical Bone of C57BL6/129 and C3H/He Mice , 2008, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[16]  J. Compston.  Assessment of fracture risk key in osteoporosis. , 2008, Practitioner.

[17]  Gladius Lewis,et al.  The use of nanoindentation for characterizing the properties of mineralized hard tissues: state-of-the art review. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

[18]  Joseph M. Wallace,et al.  Exercise Alters Mineral and Matrix Composition in the Absence of Adding New Bone , 2008, Cells Tissues Organs.

[19]  D. McLean,et al.  Automated Autofluorescence Background Subtraction Algorithm for Biomedical Raman Spectroscopy , 2007, Applied Spectroscopy.

[20]  G. Schitter,et al.  High-speed photography of compressed human trabecular bone correlates whitening to microscopic damage , 2007 .

[21]  F. Cordelières,et al.  A guided tour into subcellular colocalization analysis in light microscopy , 2006, Journal of microscopy.

[22]  A. Boyde,et al.  Viscoelastic properties of bone as a function of hydration state determined by nanoindentation , 2006 .

[23]  C. G. Lyons,et al.  Strength of cancellous bone trabecular tissue from normal, ovariectomized and drug-treated rats over the course of ageing. , 2006, Bone.

[24]  M Stampanoni,et al.  Time-lapsed investigation of three-dimensional failure and damage accumulation in trabecular bone using synchrotron light. , 2006, Bone.

[25]  J. Pasco,et al.  Half the burden of fragility fractures in the community occur in women without osteoporosis. When is fracture prevention cost-effective? , 2006, Bone.

[26]  William E. Lorensen,et al.  The NA-MIC Kit: ITK, VTK, pipelines, grids and 3D slicer as an open platform for the medical image computing community , 2006, 3rd IEEE International Symposium on Biomedical Imaging: Nano to Macro, 2006..

[27]  T. Keaveny,et al.  Trabecular microfracture and the influence of pyridinium and non-enzymatic glycation-mediated collagen cross-links. , 2005, Bone.

[28]  Pavel Matousek,et al.  Novel Assessment of Bone Using Time‐Resolved Transcutaneous Raman Spectroscopy , 2005, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[29]  J. Litniewski.  Determination of the elasticity coefficient for a single trabecula of a cancellous bone: scanning acoustic microscopy approach. , 2005, Ultrasound in medicine & biology.

[30]  Niklas Zethraeus,et al.  Assessment of fracture risk , 2005, Osteoporosis International.

[31]  R O Ritchie,et al.  Deep-ultraviolet Raman spectroscopy study of the effect of aging on human cortical bone. , 2005, Journal of biomedical optics.

[32]  H Follet,et al.  The degree of mineralization is a determinant of bone strength: a study on human calcanei. , 2004, Bone.

[33]  A. Mahadevan-Jansen,et al.  Automated Method for Subtraction of Fluorescence from Biological Raman Spectra , 2003, Applied spectroscopy.

[34]  Franco Marinozzi,et al.  Microtensile measurements of single trabeculae stiffness in human femur. , 2002, Journal of biomechanics.

[35]  R Mendelsohn,et al.  Spectroscopic Characterization of Collagen Cross‐Links in Bone , 2001, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[36]  G. Niebur,et al.  High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone. , 2000, Journal of biomechanics.

[37]  G. Danuser,et al.  Review Micromechanical testing of bone trabeculae - potentials and limitations , 2000 .

[38]  Zbigniew Gronostajski,et al.  The constitutive equations for FEM analysis , 2000 .

[39]  R Huiskes,et al.  The role of an effective isotropic tissue modulus in the elastic properties of cancellous bone. , 1999, Journal of biomechanics.

[40]  J Y Rho,et al.  Elastic properties of microstructural components of human bone tissue as measured by nanoindentation. , 1999, Journal of biomedical materials research.

[41]  S A Goldstein,et al.  Mechanical properties of human trabecular bone lamellae quantified by nanoindentation. , 1998, Technology and health care : official journal of the European Society for Engineering and Medicine.

[42]  T. Keaveny,et al.  Yield strain behavior of trabecular bone. , 1998, Journal of biomechanics.

[43]  W C Hayes,et al.  Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus. , 1994, Journal of biomechanics.

[44]  T. Keller.  Predicting the compressive mechanical behavior of bone. , 1994, Journal of biomechanics.

[45]  R. B. Ashman,et al.  Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. , 1993, Journal of biomechanics.

[46]  S A Goldstein,et al.  A comparison of the fatigue behavior of human trabecular and cortical bone tissue. , 1992, Journal of biomechanics.

[47]  L. S. Matthews,et al.  Comparison of the trabecular and cortical tissue moduli from human iliac crests , 1989, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[48]  S C Cowin,et al.  Errors induced by off-axis measurement of the elastic properties of bone. , 1988, Journal of biomechanical engineering.

[49]  R. Müller,et al.  Automated displacement and strain tracking in single trabecula using fluorescent microspheres and time lapsed microscopy , 2011 .

[50]  Tony M. Keaveny,et al.  Computational Modeling of Trabecular Bone Mechanics , 2010 .

[51]  R Huiskes,et al.  Indirect determination of trabecular bone effective tissue failure properties using micro-finite element simulations. , 2008, Journal of biomechanics.

[52]  P. Zysset,et al.  An Alternative Fabric-based Yield and Failure Criterion for Trabecular Bone , 2006 .

[53]  S. Boonen,et al.  The bone quality framework: determinants of bone strength and their interrelationships, and implications for osteoporosis management. , 2005, Clinical therapeutics.

[54]  G. Niebur,et al.  Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue. , 2004, Journal of biomechanics.

[55]  R. Müller,et al.  Time-lapsed microstructural imaging of bone failure behavior. , 2004, Journal of biomechanics.

[56]  P. Zysset,et al.  Nanoindentation discriminates the elastic properties of individual human bone lamellae under dry and physiological conditions. , 2002, Bone.

[57]  R. Huiskes,et al.  A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models. , 1995, Journal of biomechanics.

[58]  P Rüegsegger,et al.  Non-invasive bone biopsy: a new method to analyse and display the three-dimensional structure of trabecular bone. , 1994, Physics in medicine and biology.

[59]  J. L. Williams,et al.  Tensile testing of rodlike trabeculae excised from bovine femoral bone. , 1989, Journal of biomechanics.

[60]  J. Currey.  The effect of porosity and mineral content on the Young's modulus of elasticity of compact bone. , 1988, Journal of biomechanics.

[61]  E. Voce,et al.  The relationship between stress and strain for homogeneous deformations , 1948 .