Biocomposites based on Alfa fibers and starch‐based biopolymer

Biocomposite materials based on Alfa cellulose fibers (esparto grass plant) as reinforcing element and starch-based biopolymer matrix were prepared and characterized in terms of mechanical performance, thermal properties, and water absorbance behavior. The fibers and the matrix were first mixed in the melted state under mechanical shearing using a plastograph and the obtained composites were molded by injection process. The tensile mechanical analysis showed a linear increase of the composite flexural and tensile modulus upon increasing the fiber content, together with a sharp decrease of the elongation at break. The fibers′ incorporation into the biopolymer matrix brings about an enhancement in the mechanical strength and the impact strength of the composite. Dynamic mechanical thermal analysis (DMTA) investigation showed two relaxations occurring at about −30 and 35°C. The addition of Alfa fibers enhanced the storage modulus E′ before and after Tα, which is consistent with the reinforcing effect of Alfa cellulose fibers. Copyright © 2008 John Wiley & Sons, Ltd.

[1]  L. Avérous,et al.  Properties of thermoplastic blends: starch-polycaprolactone , 2000 .

[2]  J. Youngquist,et al.  Injection molding of polypropylene reinforced with short jute fibers , 1996 .

[3]  J. Thomason.  The influence of fibre length, diameter and concentration on the strength and strain to failure of glass fibre-reinforced polyamide 6,6 , 2008 .

[4]  Jose Maria Kenny,et al.  Creep behavior of biocomposites based on sisal fiber reinforced cellulose derivatives/starch blends , 2004 .

[5]  V. Álvarez,et al.  Effects of the moisture and fiber content on the mechanical properties of biodegradable polymer–sisal fiber biocomposites , 2004 .

[6]  A. Błędzki,et al.  Composites reinforced with cellulose based fibres , 1999 .

[7]  J. Thomason.  The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 5. Injection moulded long and short fibre PP , 2002 .

[8]  Ramani Narayan,et al.  Biomass (Renewable) Resources for Production of Materials, Chemicals, and Fuels: A Paradigm Shift , 1992 .

[9]  M. Vallejos,et al.  Effect of maleated polypropylene as coupling agent for polypropylene composites reinforced with hemp strands , 2006 .

[10]  A. Dibenedetto,et al.  The effect of fiber-matrix stress transfer on the strength of fiber-reinforced composite materials , 1988 .

[11]  L. Avérous,et al.  Biocomposites based on plasticized starch: thermal and mechanical behaviours , 2004 .

[12]  L. Avérous.  Cellulose-based biocomposites: comparison of different multiphasic systems , 2007 .

[13]  P. Mutjé,et al.  Correlation between the cellulose fibres beating and the fixation of a soluble cationic polymer , 1984 .

[14]  J. V. Soest,et al.  Influence of glycerol and water content on the structure and properties of extruded starch plastic sheets during aging , 1997 .

[15]  L. Avérous,et al.  Plasticized starch–cellulose interactions in polysaccharide composites , 2001 .

[16]  P. Supaphol,et al.  Preparation and characterization of jute- and flax-reinforced starch-based composite foams , 2004 .

[17]  Alexei Vazquez,et al.  Degradation of sisal fibre/Mater Bi-Y biocomposites buried in soil , 2006 .

[18]  Alain Dufresne,et al.  Short natural-fibre reinforced polyethylene and natural rubber composites: Effect of silane coupling agents and fibres loading , 2007 .

[19]  A. Kelly,et al.  Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum , 1965 .

[20]  M. Bhattacharya,et al.  Properties of injection moulded blends of starch and modified biodegradable polyesters , 2001 .

[21]  L. Avérous,et al.  Effects of lignin content on the properties of lignocellulose-based biocomposites , 2006 .

[22]  J. Kenny,et al.  Processing, properties and stability of biodegradable composites based on Mater‐Bi® and cellulose fibres , 2003 .

[23]  Sadok Roudesli,et al.  Effect of chemical treatments of Alfa (Stipa tenacissima) fibres on water-sorption properties , 2007 .

[24]  D. Lourdin,et al.  Influence of equilibrium relative humidity and plasticizer concentration on the water content and glass transition of starch materials , 1997 .

[25]  A. S. Herrmann,et al.  Construction materials based upon biologically renewable resources—from components to finished parts , 1998 .

[26]  H. L. Cox.  The elasticity and strength of paper and other fibrous materials , 1952 .

[27]  L. Nicolais,et al.  Effect of processing conditions on dimensions of sisal fibers in thermoplastic biodegradable composites , 2001 .

[28]  A. J. Carvalho,et al.  Thermoplastic starch–cellulosic fibers composites: preliminary results , 2001 .

[29]  H. Bader,et al.  Influence of natural fibres on the mechanical properties of biodegradable polymers. , 1998 .

[30]  L. Nicolais,et al.  Effect of processing conditions on mechanical and viscoelastic properties of biocomposites , 2003 .

[31]  M Braden,et al.  Modified Arrhenius equation for the frequency dependence of the transition temperatures of polymers. , 1989, Biomaterials.

[32]  R. Scaffaro,et al.  Effect of adding wood flour to the physical properties of a biodegradable polymer , 2008 .

[33]  P. York,et al.  The Poisson's ratio of microcrystalline cellulose , 1994 .

[34]  Long Yu,et al.  Polymer blends and composites from renewable resources , 2006 .

[35]  J. Kennedy,et al.  Studies on the properties of natural fibers-reinforced thermoplastic starch composites , 2005 .

[36]  .. L.Ghali,et al.  Physical and Mechanical Characterization of Technical Esparto (Alfa) Fibres , 2006 .

[37]  G. Moates,et al.  Phase and glass transition behaviour of concentrated barley starch-glycerol-water mixtures, a model for thermoplastic starch , 1997 .

[38]  S. Barnes,et al.  Impact performance of Miscanthus/Novamont Mater-Bi® biocomposites , 2003 .