A hybrid geometric modeling method for lattice structures fabricated by additive manufacturing

Lattice structure is a type of cellular structures which is made of interconnected struts. It attracts a great research interest, since it can achieve different desired properties for a broad spectrum of applications. To generate the geometric model of lattice structures with multiscale complexities is not an easy task for most existing conventional CAD software, especially when the number of cells or struts is very large. To solve this issue, an innovative hybrid geometric modeling method is proposed in this paper. This proposed method can be divided into three steps. They are lattice frame generation, construction of geometric functions, and voxelization. A detailed description of the algorithms and data structures used in each stage are provided in this paper. Several case studies are given at the end of this paper to illustrate the effectiveness and efficiency of the proposed method. In general, by integrating the advantages of several different geometric modeling methods, the proposed method not only provides an efficient and flexible way for designers to generate different types of lattice structures for desired properties, but also offers an interface between the geometric and simulation model of lattice structures. It further removes the barrier in the design and optimization of lattice structures with multiscale complexities.

[1]  Roderic S. Lakes,et al.  Stiff, strong, zero thermal expansion lattices via material hierarchy , 2014 .

[2]  P. J. Narayanan,et al.  Real-Time Ray Tracing of Implicit Surfaces on the GPU , 2010, IEEE Transactions on Visualization and Computer Graphics.

[3]  M. Whiteley,et al.  Two and three-quarter dimensional meshing facilitators , 2005, Engineering with Computers.

[4]  Haydn N. G. Wadley,et al.  Hollow pyramidal lattice truss structures , 2011 .

[5]  Alexei Sourin,et al.  Function representation in geometric modeling: concepts, implementation and applications , 1995, The Visual Computer.

[6]  A. Tyas,et al.  Energy absorption in lattice structures in dynamics: Experiments , 2016 .

[7]  David W. Rosen,et al.  Computer-Aided Design for Additive Manufacturing of Cellular Structures , 2007 .

[8]  Li Yang,et al.  Non-stochastic Ti–6Al–4V foam structures with negative Poisson's ratio , 2012 .

[9]  Xu Guo,et al.  Additive manufacturing oriented design of graded lattice structures through explicit topology optimization , 2017 .

[10]  Yaoyao Fiona Zhao,et al.  A survey of the design methods for additive manufacturing to improve functional performance , 2016 .

[11]  Guido Gerig,et al.  User-guided 3D active contour segmentation of anatomical structures: Significantly improved efficiency and reliability , 2006, NeuroImage.

[12]  M. Ashby,et al.  Effective properties of the octet-truss lattice material , 2001 .

[13]  Steven J. Owen,et al.  A Survey of Unstructured Mesh Generation Technology , 1998, IMR.

[14]  Yunlong Tang,et al.  Design method for conformal lattice-skin structure fabricated by AM technologies , 2016 .

[15]  Supachai Vongbunyong,et al.  Rapid generation of uniform cellular structure by using prefabricated unit cells , 2017, Int. J. Comput. Integr. Manuf..

[16]  Yaoyao Fiona Zhao,et al.  Lattice Structure Design and Optimization With Additive Manufacturing Constraints , 2018, IEEE Transactions on Automation Science and Engineering.

[17]  Anil V. Rao,et al.  GPOPS-II , 2014, ACM Trans. Math. Softw..

[18]  T. Lu,et al.  Ultralight X-type lattice sandwich structure (I): Concept, fabrication and experimental characterization , 2009 .

[19]  Yaoyao Fiona Zhao,et al.  Simulation of elastic properties of solid-lattice hybrid structures fabricated by additive manufacturing , 2017 .

[20]  David R. Hill,et al.  OpenVDB: an open-source data structure and toolkit for high-resolution volumes , 2013, SIGGRAPH '13.

[21]  David W. Rosen,et al.  A HYBRID GEOMETRIC MODELING METHOD FOR LARGE SCALE CONFORMAL CELLULAR STRUCTURES , 2005 .

[22]  Hadley Brooks,et al.  Design of conformal cooling layers with self-supporting lattices for additively manufactured tooling , 2016 .

[23]  X. Y. Kou,et al.  Heterogeneous object modeling: A review , 2007, Comput. Aided Des..

[24]  Adedeji Aremu,et al.  A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing , 2017 .

[25]  Ken Museth,et al.  VDB: High-resolution sparse volumes with dynamic topology , 2013, TOGS.

[26]  Dietmar Werner Hutmacher,et al.  CAD/CAM-assisted breast reconstruction , 2011, Biofabrication.

[27]  T. Schaedler,et al.  Architected Cellular Materials , 2016 .

[28]  Supachai Vongbunyong,et al.  Development of Software Tool for Cellular Structure Integration for Additive Manufacturing , 2016 .

[29]  Qiang Du,et al.  Centroidal Voronoi Tessellations: Applications and Algorithms , 1999, SIAM Rev..

[30]  H. Wadley.  Cellular Metals Manufacturing , 2002 .

[31]  Yaoyao Fiona Zhao,et al.  Bidirectional Evolutionary Structural Optimization (BESO) based design method for lattice structure to be fabricated by additive manufacturing , 2015, Comput. Aided Des..

[32]  Paolo Cignoni,et al.  MeshLab: an Open-Source 3D Mesh Processing System , 2008, ERCIM News.

[33]  S. P. Lloyd,et al.  Least squares quantization in PCM , 1982, IEEE Trans. Inf. Theory.

[34]  C. Emmelmann,et al.  Laser Additive Manufacturing of Modified Implant Surfaces with Osseointegrative Characteristics , 2011 .

[35]  M. Curto,et al.  A method to design biomimetic scaffolds for bone tissue engineering based on Voronoi lattices , 2016 .

[36]  G. Reinhart,et al.  Load-Adapted Design of Generative Manufactured Lattice Structures , 2011 .

[37]  Irina Voiculescu,et al.  Implicit Curves and Surfaces: Mathematics, Data Structures and Algorithms , 2009 .

[38]  Alexander A. Pasko,et al.  Procedural function-based modelling of volumetric microstructures , 2011, Graph. Model..

[39]  Hang Si,et al.  TetGen, a Delaunay-Based Quality Tetrahedral Mesh Generator , 2015, ACM Trans. Math. Softw..

[40]  A. Bandyopadhyay,et al.  Bone tissue engineering using 3D printing , 2013 .

[41]  Hongqing Vincent Wang,et al.  A Unit Cell Approach for Lightweight Structure and Compliant Mechanism , 2005 .

[42]  R. Singer,et al.  Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. , 2008, Acta biomaterialia.

[43]  Alexander A. Pasko,et al.  Multi-scale space-variant FRep cellular structures , 2013, Comput. Aided Des..

[44]  Roderic S. Lakes,et al.  Stiff lattices with zero thermal expansion and enhanced stiffness via rib cross section optimization , 2013 .