Shrinkage and Warpage Optimization of Expanded‐Perlite‐Filled Polypropylene Composites in Extrusion‐Based Additive Manufacturing

A major challenge in extrusion-based additive manufacturing is the lack of commercially available materials compared to those in well-established processes like injection molding or extrusion. This study aims at expanding the material database by evaluating the feasibility of polypropylene, which is one of the most common and technologically relevant semicrystalline polymers. Expanded-perlite-filled polypropylene and ternary blends with amorphous polyolefins are evaluated to establish an understanding of their processability and their printability. A detailed study on the shrinkage behavior, as well as on the thermal, mechanical, morphological, and warpage properties is performed. It is found that smaller sized fillers result in a tremendous warpage and shrinkage reduction and concurrently improved mechanical properties than compounds filled with bigger sized fillers. Based on the optimal properties profile, a ternary blend that can overcome the shrinkage and warpage of printed parts is suggested.

[1]  Gordon G Wallace,et al.  3-dimensional (3D) fabricated polymer based drug delivery systems. , 2014, Journal of controlled release : official journal of the Controlled Release Society.

[2]  K. Leong,et al.  Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. , 2003, Biomaterials.

[3]  N. Elton,et al.  Nucleation and crystallization of polypropylene by mineral fillers: relationship to impact strength , 1992 .

[4]  A. Dibenedetto,et al.  The mechanical properties of ternary composites of polypropylene with inorganic fillers and elastomer inclusions , 1994, Journal of Materials Science.

[5]  Zhugen Yang,et al.  Nonisothermal crystallization and melting behavior of β‐nucleated isotactic polypropylene and polyamide 66 blends , 2011 .

[6]  Mehrdad Haghi,et al.  Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate , 2014 .

[7]  S. Fernández-Tavizón,et al.  Shrinkage reduction and morphological characterization of PP reinforced with glass fiber and nanoclay using functionalized PP as compatibilizer , 2017 .

[8]  Noshir A. Langrana,et al.  Feedstock material property – process relationships in fused deposition of ceramics (FDC) , 2000 .

[9]  Guha Manogharan,et al.  Making sense of 3-D printing: Creating a map of additive manufacturing products and services , 2014 .

[10]  Amit Bandyopadhyay,et al.  Application of fused deposition in controlled microstructure metal‐ceramic composites , 2006 .

[11]  M. Nikzad,et al.  Dynamic Mechanical Properties of Fused Deposition Modelling Processed Polyphenylsulfone Material , 2016 .

[12]  L. Sobczak,et al.  Polyolefin composites with natural fibers and wood‐modification of the fiber/filler–matrix interaction , 2013 .

[13]  E. J. Foster,et al.  Melt processing of polyamide 12 and cellulose nanocrystals nanocomposites , 2015 .

[14]  J. Jancar.  Failure mechanics in thermoplastics filled with inorganic filler and elastomer inclusions: Experiments and modeling , 1996 .

[15]  L. R. Schmidt,et al.  Glass bead‐filled polypropylene part I: Rheological and mechanical properties , 1977 .

[16]  A. Basit,et al.  Fused-filament 3D printing (3DP) for fabrication of tablets. , 2014, International journal of pharmaceutics.

[17]  Ji‐Zhao Liang.  Toughening and reinforcing in rigid inorganic particulate filled poly(propylene): A review , 2002 .

[18]  R. Spontak,et al.  Bridged double percolation in conductive polymer composites: an electrical conductivity, morphology and mechanical property study , 2002 .

[19]  Alberto Boschetto,et al.  Accuracy prediction in fused deposition modeling , 2014 .

[20]  Margam Chandrasekaran,et al.  Rapid prototyping in tissue engineering: challenges and potential. , 2004, Trends in biotechnology.

[21]  D. Frihi,et al.  Optimization of the crystallinity of polypropylene/submicronic-talc composites: The role of filler ratio and cooling rate , 2016 .

[22]  Smadar Cohen,et al.  Rapid End-Group Modification of Polysaccharides for Biomaterial Applications in Regenerative Medicine. , 2014, Macromolecular rapid communications.

[23]  Caterina Casavola,et al.  Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory , 2016 .

[24]  G. Landon,et al.  The influence of particle size on the tensile strength of particulate — filled polymers , 1977 .

[25]  Timothy J Horn,et al.  Overview of Current Additive Manufacturing Technologies and Selected Applications , 2012, Science progress.

[26]  Ji-Whan Ahn,et al.  A strategy of precipitated calcium carbonate (CaCO3) fillers for enhancing the mechanical properties of polypropylene polymers , 2015, Korean Journal of Chemical Engineering.

[27]  E. J. Foster,et al.  Fabrication and Properties of Polyethylene/Cellulose Nanocrystal Composites , 2017 .

[28]  Harwinder Singh,et al.  Development of rapid tooling using fused deposition modeling: a review , 2016 .

[29]  M. Drongelen,et al.  A new crystallization process in polypropylene highly filled with calcium carbonate , 2015, Colloid and Polymer Science.

[30]  Lixin Wu,et al.  Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing , 2016 .

[31]  Srinivasa Prakash Regalla,et al.  Multi-objective optimisation of strength and volumetric shrinkage of FDM parts , 2014 .

[32]  I. Gibson,et al.  State of the art and future direction of additive manufactured scaffolds-based bone tissue engineering , 2014 .

[33]  Wei Li,et al.  A specific groove design for individualized healing in a canine partial sternal defect model by a polycaprolactone/hydroxyapatite scaffold coated with bone marrow stromal cells. , 2014, Journal of biomedical materials research. Part A.

[34]  S. Teoh,et al.  Scaffold design and in vitro study of osteochondral coculture in a three-dimensional porous polycaprolactone scaffold fabricated by fused deposition modeling. , 2003, Tissue engineering.

[35]  Jordi Llumà,et al.  Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts , 2015 .

[36]  D. Rodrigue,et al.  Biocomposites based on Argan nut shell and a polymer matrix: Effect of filler content and coupling agent. , 2016, Carbohydrate polymers.

[37]  I Zein,et al.  Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.

[38]  Domingo-EspinMiquel,et al.  Influence of Building Parameters on the Dynamic Mechanical Properties of Polycarbonate Fused Deposition Modeling Parts , 2014 .

[39]  Richard J. Bibb,et al.  Comparing additive manufacturing technologies for customised wrist splints , 2015 .

[40]  Syed H. Masood,et al.  STUDY OF DYNAMIC MECHANICAL PROPERTIES OF FUSED DEPOSITION MODELLING PROCESSED ULTEM MATERIAL , 2014 .

[41]  Syed H. Masood,et al.  Development of new metal/polymer materials for rapid tooling using Fused deposition modelling , 2004 .

[42]  A. Braga,et al.  The influence of time-to-market and target costing in the new product development success , 2008 .

[43]  L. Fambri,et al.  Fused deposition modelling with ABS–graphene nanocomposites , 2016 .

[44]  M. Rong,et al.  Phase structure and mechanical properties of ternary polypropylene/elastomer/nano-CaCO3 composites , 2007 .

[45]  D. W. Van Krevelen,et al.  CHAPTER 1 – POLYMER PROPERTIES , 1997 .

[46]  Minna Poikelispää,et al.  Influence of nanoclay‐carbon black hybrid fillers on cure and properties of natural rubber compounds , 2013 .

[47]  Dichen Li,et al.  Current status of additive manufacturing for tissue engineering scaffold , 2015 .

[48]  Michel Dorget,et al.  Viscosity-induced filler localisation in immiscible polymer blends , 2015 .

[49]  F. Piller,et al.  Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited , 2015 .

[50]  Seung‐Hwan Lee,et al.  Effects of filler size and content on shrinkage and gloss of injection molded PBT/PET/talc composites , 2010 .

[51]  R. Li,et al.  The mechanical and thermal behaviors of glass bead filled polypropylene , 2004 .

[52]  M. Terano,et al.  Syndiotactic polypropylene/microfibrous cellulose composites: Effect of filler size on tensile properties , 2013 .

[53]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[54]  K. Premphet,et al.  Phase structure and property relationships in ternary polypropylene/elastomer/filler composites: Effect of elastomer polarity , 2000 .

[55]  N. Phan-Thien,et al.  Thermoviscoelastic simulation of thermally and pressure-induced stresses in injection moulding for the prediction of shrinkage and warpage for fibre-reinforced thermoplastics , 1999 .

[56]  P. Bártolo,et al.  Additive manufacturing of tissues and organs , 2012 .

[57]  J. Bobek,et al.  Physical-Mechanical Properties of Hollow Glass Microspheres Filled Polypropylene Composites for Injection Moulding , 2015 .

[58]  P. Calvert,et al.  Trabecular scaffolds created using micro CT guided fused deposition modeling. , 2008, Materials science & engineering. C, Materials for biological applications.

[59]  Jun Zhang,et al.  Increased flow property of polycarbonate by adding hollow glass beads , 2005 .

[60]  E. J. Foster,et al.  Influence of mechanical treatments on the properties of cellulose nanofibers isolated from microcrystalline cellulose , 2014 .

[61]  M. A. Alhnan,et al.  Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing. , 2015, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[62]  Laine Mears,et al.  Use of Fused Deposition Modeling of Polyphenylsulfone for Centrifugal Casting of Polyurethane: Material, Surface, and Process Considerations , 2011 .

[63]  S. Teoh,et al.  Polycaprolactone-based fused deposition modeled mesh for delivery of antibacterial agents to infected wounds. , 2011, Biomaterials.

[64]  M. Alexander,et al.  Desktop 3D printing of controlled release pharmaceutical bilayer tablets. , 2014, International journal of pharmaceutics.

[65]  R. Shanks,et al.  PP–elastomer–filler hybrids. I. Processing, microstructure, and mechanical properties , 1996 .

[66]  T. Tinçer,et al.  Study on mechanical properties of perlite-filled gamma-irradiated polypropylene , 2001 .

[67]  A. F. Silva,et al.  Fused deposition modeling with polypropylene , 2015 .

[68]  Mohsen Badrossamay,et al.  Optimization of the printing parameters affecting dimensional accuracy and internal cavity for HIPS material used in fused deposition modeling processes , 2015 .

[69]  Albert J. Shih,et al.  Additive Manufacturing of Custom Orthoses and Prostheses – A Review☆ , 2015 .

[70]  A. Jukić,et al.  Influence of inorganic fillers on PLA crystallinity and thermal properties , 2015, Journal of Thermal Analysis and Calorimetry.

[71]  X. X. Wei,et al.  The analytical solutions for the stress distributions within elastic hollow spheres under the diametrical point loads , 2015 .

[72]  V. Pettarin,et al.  Biaxial yielding of polypropylene/elastomeric polyolefin blends: Effect of elastomer content and thermal annealing , 2008 .

[73]  E. J. Foster,et al.  Reinforcing Poly(ethylene) with Cellulose Nanocrystals. , 2014, Macromolecular rapid communications.

[74]  Vamsi K. Yadavalli,et al.  Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices , 2013 .

[75]  S. Pimbert.  Fractionated Crystallization and Morphology in Binary Blends of Isotactic PP and HDPE with Cycloolefin Copolymers , 2004 .

[76]  S. Al-zahrani,et al.  Viscoelastic, thermal, and morphological analysis of HDPE/EVA/CaCO3 ternary blends , 2011 .

[77]  P. Johansson,et al.  Effect of additives on the melt rheology and thermal degradation of poly[(R)-3-hydroxybutyric acid] , 2015 .

[78]  Christopher B. Williams,et al.  Additive manufacturing (AM) and nanotechnology: promises and challenges , 2013 .

[79]  E. J. Foster,et al.  Influence of Processing Conditions on Properties of Poly (Vinyl acetate)/Cellulose Nanocrystal Nanocomposites , 2015 .

[80]  W. C. Smith,et al.  Structural characteristics of fused deposition modeling polycarbonate material , 2013 .

[81]  Wei Chen,et al.  3D printing of versatile reactionware for chemical synthesis , 2016, Nature Protocols.

[82]  Ji Zhao,et al.  Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS , 2015, Materials.

[83]  D. Drummer,et al.  Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion , 2016 .

[84]  K. Shelesh‐Nezhad,et al.  Crystallization, shrinkage and mechanical characteristics of polypropylene/CaCO3 nanocomposites , 2013 .

[85]  Gordon G. Wallace,et al.  Extrusion printed polymer structures: a facile and versatile approach to tailored drug delivery platforms. , 2012, International journal of pharmaceutics.

[86]  K. Migler,et al.  Infrared thermography of welding zones produced by polymer extrusion additive manufacturing. , 2016, Additive manufacturing.

[87]  Syed H. Masood,et al.  Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling , 2011 .

[88]  Hyoung-Seop Kim,et al.  The rheological, thermal, and mechanical properties for polypropylene and amorphous poly alpha olefin blends , 2008 .

[89]  Lixin Wu,et al.  A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling , 2016 .