Modeling phase change materials behavior in building applications: Comments on material characterization and model validation

In a recent meeting of IEA's Annex 23, several members presented their conclusions on the modeling of phase change materials behavior in the context of building applications. These conclusions were in agreement with those of a vast review, involving the survey of more than 250 journal papers, undertaken earlier by the group of Ecole de technologie superieure. In brief, it can be stated that, at this point, the confidence in reviewed models is too low to use them to predict the future behavior of a building with confidence. Moreover, it was found that overall thermal behaviors of phase change material are poorly known, which by itself creates an intrinsic unknown in any model. Models themselves are most of time suspicious as they are often not tested in a very stringent or exhaustive way. In addition, it also appears that modeling parameters are somewhat too simplified to realistically describe the complete physics needed to predict the real life performance of PCMs added to a building. As a result, steps are now taken to create standard model benchmarks that will improve the confidence of the users. Hopefully, following these efforts, confidence will increase and usage of PCM in buildings should be eased.

[1]  L. Cabeza,et al.  Heat and cold storage with PCM: An up to date introduction into basics and applications , 2008 .

[2]  Ravi Radhakrishnan,et al.  Freezing of simple fluids in microporous activated carbon fibers: Comparison of simulation and experiment , 1999 .

[3]  Joseph Andrew Clarke,et al.  Numerical modelling and thermal simulation of PCM–gypsum composites with ESP-r , 2004 .

[4]  Tarik Kousksou,et al.  Experimental and modeling study of ice melting , 2007 .

[5]  Subrata Mondal,et al.  Phase change materials for smart textiles – An overview , 2008 .

[6]  Hui Li,et al.  Preparation and properties of lauric acid/silicon dioxide composites as form-stable phase change materials for thermal energy storage , 2010 .

[7]  H. Takeuchi,et al.  An evaluation of microencapsulated PCM for use in cold energy transportation medium , 1996, IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.

[8]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[9]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[10]  D. Feldman,et al.  The stability of phase change materials in concrete , 1992 .

[11]  V. P. Sethi,et al.  Survey and evaluation of heating technologies for worldwide agricultural greenhouse applications , 2008 .

[12]  Ahmet Sarı,et al.  Capric–myristic acid/vermiculite composite as form-stable phase change material for thermal energy storage , 2009 .

[13]  Q. Cao,et al.  Hyperbranched polyurethane as novel solid–solid phase change material for thermal energy storage , 2006 .

[14]  Sunil Kumar Singal,et al.  Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material , 2008 .

[15]  Ravi Radhakrishnan,et al.  FREE ENERGY STUDIES OF FREEZING IN SLIT PORES : AN ORDER-PARAMETER APPROACH USING MONTE CARLO SIMULATION , 1999 .

[16]  Jinyue Yan,et al.  Enhanced thermal conductivity and thermal performance of form-stable composite phase change materials by using β-Aluminum nitride , 2009 .

[17]  Luisa F. Cabeza,et al.  Materials used as PCM in thermal energy storage in buildings: A review , 2011 .

[18]  Daniel R. Rousse,et al.  A numerical study of the melting of phase change material heated from a vertical wall of a rectangular enclosure , 2009 .

[19]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[20]  Jean-Pierre Bédécarrats,et al.  Phase-change thermal energy storage using spherical capsules: performance of a test plant , 1996 .

[21]  Adriaan S. Luyt,et al.  Thermal properties of uncross-linked and cross-linked LLDPE/wax blends , 2000 .

[22]  Dariusz Heim,et al.  Isothermal storage of solar energy in building construction , 2010 .

[23]  Wei Li,et al.  Effects of Microencapsulated Phase Change Materials Granularity and Heat Treat Treatment Condition on the Structure and Performance of Polyurethane Foams , 2008 .

[24]  Bogdan Diaconu,et al.  Experimental assessment of heat storage properties and heat transfer characteristics of a phase change material slurry for air conditioning applications , 2010 .

[25]  Yvan Dutil,et al.  A review on phase-change materials: Mathematical modeling and simulations , 2011 .

[26]  Daniel R. Rousse,et al.  A Novel Technique for Experimental Thermophysical Characterization of Phase-Change Materials , 2011 .

[27]  Yuan Hu,et al.  Preparation and characterizations of HDPE–EVA alloy/OMT nanocomposites/paraffin compounds as a shape stabilized phase change thermal energy storage material , 2006 .

[28]  Zongjin Li,et al.  Granular phase changing composites for thermal energy storage , 2005 .

[29]  Q. Cao,et al.  Crystalline-amorphous phase transition of hyperbranched polyurethane phase change materials for energy storage , 2007 .

[30]  S. C. Solanki,et al.  Heat transfer characteristics of thermal energy storage system using PCM capsules: A review , 2008 .

[31]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[32]  Dong Zhang,et al.  Experimental study on the phase change behavior of phase change material confined in pores , 2007 .

[33]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[34]  Joseph Virgone,et al.  Experimental investigation of wallboard containing phase change material: Data for validation of numerical modeling , 2009 .

[35]  Adriaan S. Luyt,et al.  Comparison of different waxes as processing agents for low-density polyethylene , 2006 .

[36]  Mihai Cruceru,et al.  Novel concept of composite phase change material wall system for year-round thermal energy savings , 2010 .

[37]  V. V. Tyagi,et al.  PCM thermal storage in buildings: A state of art , 2007 .