Experimental and numerical investigation on thermal and electrical performance of a building integrated photovoltaic–thermal collector system

Abstract An experimentally validated computational fluid dynamics (CFD) model of a novel building integrated photovoltaic–thermal (BIPV/T) collector is studied to determine the effect of active heat recovery on cell efficiency and to determine the effectiveness of the device as a solar hot water heater. Parametric analysis indicates that cell efficiency can be raised by 5.3% and that water temperatures suitable for domestic hot water use are possible. Thermal and combined (thermal plus electrical) efficiencies reach 19% and 34.9%, respectively. A new correlation is developed relating electrical efficiency to collector inlet water temperature, ambient air temperature and insolation that allows cell efficiency to be calculated directly.

[1]  Fue-Sang Lien,et al.  Numerical modeling of buoyancy-driven turbulent flows in enclosures , 2004 .

[2]  M. Sandberg,et al.  Investigation of fluid flow and heat transfer in a vertical channel heated from one side by PV elements, part II - Experimental study , 1996 .

[3]  Mats Sandberg,et al.  Buoyancy-induced air flow in photovoltaic facades: Effect of geometry of the air gap and location of solar cell modules , 2002 .

[4]  Vijay K. Garg.  Applied Computational Fluid Dynamics , 1998 .

[5]  Mats Sandberg,et al.  Flow and heat transfer in the air gap behind photovoltaic panels , 1998 .

[6]  Yiannis Tripanagnostopoulos,et al.  Aspects and improvements of hybrid photovoltaic/thermal solar energy systems , 2007 .

[7]  S. Fraser,et al.  Turbulent natural convection in a vertical parallel-plate channel with asymmetric heating , 2007 .

[8]  Saffa Riffat,et al.  CFD modelling of air flow and thermal performance of an atrium integrated with photovoltaics , 2004 .

[9]  Simon Furbo,et al.  Flow distribution in a solar collector panel with horizontally inclined absorber strips , 2007 .

[10]  Y. Poissant,et al.  Experimental and numerical results for a building-integrated photovoltaics test facility , 2005, Conference Record of the Thirty-first IEEE Photovoltaic Specialists Conference, 2005..

[11]  Bruno Peuportier,et al.  Photovoltaic collectors efficiency according to their integration in buildings , 2006 .

[12]  Tin-Tai Chow,et al.  An experimental study of façade-integrated photovoltaic/water-heating system , 2007 .

[13]  O. Turgut,et al.  An experimental and three-dimensional numerical study of natural convection heat transfer between two horizontal parallel plates ☆ , 2007 .

[14]  Soteris A. Kalogirou,et al.  Hybrid PV/T solar systems for domestic hot water and electricity production , 2006 .

[15]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[16]  Mark W. Davis,et al.  Prediction of Building Integrated Photovoltaic Cell Temperatures , 2001 .