Multiple cracks detection and visualization using magnetic flux leakage and eddy current pulsed thermography

Abstract This paper investigates two non-destructive evaluation methods, magnetic flux leakage (MFL) and eddy current pulsed thermography (ECPT), for both artificial and natural multiple cracks (MC) detection and visualization. The detection capability and characteristics of MC visualization are verified and compared through simulations and experiments. Results show that, MFL testing reflects the surface shapes and orientations of MC by 3D magnetic field imaging. However, it is unable to evaluate the depth of artificial MC and detailed surface shapes of natural MC due to limitations of sensor array spatial resolution. ECPT shows more capability in MC visualization in detail from thermal images. The obtained thermal image sequences from ECPT demonstrate rich transient and pattern information to evaluate MC geometrical features. After discussion of the two methods with the probability of detection (POD) analysis, a promising new sensing structure which potentially combines both advantages of them is proposed to enhance the NDE performance for MC evaluation.

[1]  Gui Yun Tian,et al.  A comparative study of principal component analysis and independent component analysis in eddy current pulsed thermography data processing. , 2013, The Review of scientific instruments.

[2]  Brian A. Shaw,et al.  Eddy current pulsed thermography for fatigue evaluation of gear , 2014 .

[3]  G. Tian,et al.  Velocity effect analysis of dynamic magnetization in high speed magnetic flux leakage inspection , 2014 .

[4]  Mengchun Pan,et al.  Experimental and finite element analysis study of 3D magnetic field sensing for pulsed magnetic flux leakage defect characterisation , 2011 .

[5]  Wai Lok Woo,et al.  Thermography pattern analysis and separation , 2014 .

[6]  Zhenmao Chen,et al.  Shape reconstruction of multiple cracks from ECT signals by means of a stochastic method , 2006, IEEE Transactions on Magnetics.

[7]  Gui Yun Tian,et al.  PEC thermography for imaging multiple cracks from rolling contact fatigue , 2011 .

[8]  Kenzo Miya,et al.  Reconstruction of Parallel Cracks by ECT , 2002 .

[9]  Takayuki Suzuki,et al.  Inverse Analysis of Multiple Cracks Using Magnetic Flux Leakage Considering the Size of Flux Gate Sensor , 2013 .

[10]  Jian Cai,et al.  Ultrasonic phased array with dispersion compensation for monitoring multiple damages in structures , 2014 .

[11]  M Ph Papaelias,et al.  A review on non-destructive evaluation of rails: State-of-the-art and future development , 2008 .

[12]  Hans-Martin Thomas,et al.  NDT techniques for railroad wheel and gauge corner inspection , 2004 .

[13]  Liang Cheng,et al.  State Detection of Bond Wires in IGBT Modules Using Eddy Current Pulsed Thermography , 2014, IEEE Transactions on Power Electronics.

[14]  Wai Lok Woo,et al.  Impact Damage Detection and Identification Using Eddy Current Pulsed Thermography Through Integration of PCA and ICA , 2014, IEEE Sensors Journal.

[15]  Gui Yun Tian,et al.  3D magnetic field sensing for magnetic flux leakage defect characterisation , 2006 .

[16]  Yunze He,et al.  Lateral heat conduction based eddy current thermography for detection of parallel cracks and rail tread oblique cracks , 2015 .

[17]  Que Pei-wen,et al.  3D FEM analysis in magnetic flux leakage method , 2006 .

[18]  Li Wang,et al.  Rolling contact fatigue detection using eddy current pulsed thermography , 2014, 2014 IEEE Far East Forum on Nondestructive Evaluation/Testing.

[19]  Uwe Zerbst,et al.  Introduction to the damage tolerance behaviour of railway rails – a review , 2009 .

[20]  Wai Lok Woo,et al.  Thermography spatial-transient-stage mathematical tensor construction and material property variation track , 2014 .

[21]  Slawomir Koziel,et al.  Sizing of multiple cracks using magnetic flux leakage measurements , 2010 .

[22]  Urs Staufer,et al.  Characterization of an integrated force sensor based on a MOS transistor for applications in scanning force microscopy , 1998 .

[23]  Rahmatollah Ghajar CRACK INTERACTION IN NDE OF MULTIPLE CRACKS BY MEANS OF POTENTIAL DROP TECHNIQUE , 2003 .

[24]  Gemma Nicholson,et al.  Measurement and modelling of ACFM response to multiple RCF cracks in rail and wheels , 2013 .

[25]  W. L. Woo,et al.  Physical interpretation and separation of eddy current pulsed thermography , 2013 .

[26]  Wai Lok Woo,et al.  Automatic Defect Identification of Eddy Current Pulsed Thermography Using Single Channel Blind Source Separation , 2014, IEEE Transactions on Instrumentation and Measurement.

[27]  Junzhe Gao,et al.  Defect classification based on rectangular pulsed eddy current sensor in different directions , 2010 .

[28]  Gui Yun Tian,et al.  Modelling and evaluation of eddy current stimulated thermography , 2010 .

[29]  John Philip,et al.  Naked eye visualization of defects in ferromagnetic materials and components , 2013 .

[30]  Teresa Vidal-Calleja,et al.  Multiple defect interpretation based on Gaussian processes for MFL technology , 2013, Smart Structures.

[31]  Gui Yun Tian,et al.  Features extraction of sensor array based PMFL technology for detection of rail cracks , 2014 .

[32]  Yunze He,et al.  Eddy current step heating thermography for quantitatively evaluation , 2013 .

[33]  B. B. Lahiri,et al.  Infrared thermography based defect detection in ferromagnetic specimens using a low frequency alternating magnetic field , 2014 .

[34]  M. M. Tehranchi,et al.  Double core giant magneto-impedance sensors for the inspection of magnetic flux leakage from metal surface cracks , 2011 .

[35]  Feilu Luo,et al.  Defect characterisation based on pulsed eddy current imaging technique , 2010 .

[36]  Yunze He,et al.  Research on spectral response of pulsed eddy current and NDE applications , 2013 .

[37]  Christian Boller,et al.  Reliability considerations of NDT by probability of detection (POD) determination using ultrasound phased array , 2013 .

[38]  Gui Yun Tian,et al.  Quantitative non-destructive evaluation method for impact damage using eddy current pulsed thermography , 2013 .

[39]  Junzhe Gao,et al.  Defect identification and evaluation based on three-dimensional magnetic field measurement of pulsed eddy current , 2009 .

[40]  Gui Yun Tian,et al.  Pulsed magnetic flux leakage techniques for crack detection and characterisation , 2006 .

[41]  Feilu Luo,et al.  Defect characterisation using pulsed eddy current thermography under transmission mode and NDT applications , 2012 .

[42]  Noritaka Yusa,et al.  Quantitative profile evaluation of natural cracks in a steam generator tube from eddy current signals , 2001 .

[43]  Gui Yun Tian,et al.  Pulsed Eddy Current Thermography and Applications , 2011 .