A New Imaging System for Real-Time Process Control

In this paper, a new tomography technique called electrical charge tomography for two-phase flow imaging is presented. The probe consists of few pair of electrodes which are electrically energized to generate electrical charges within the fluid under test. The intensity of these charges depends on the chemical and physical properties of the fluid, as well as to its molecular distribution. Another group of electrodes surrounding the cross section of the fluid under test are used to capture the induced electrical charges. These are then converted into an electrical signal using a high sensitive charge amplifier. A postprocessing unit which consists of an analog to digital converter, followed by an field programmable gate array (FPGA) module is then used for high level signal processing (i.e., a dedicated dynamic thresholding algorithm) and image reconstruction. Experimental results demonstrate the capability of the system to accurately generate 2-D cross-sectional images, where the error is lower by up to 14% when using another electrical capacitance (ECT) tomography probe. The other advantage of this technique over ECT is the reduced data acquisition time, since in ECT a minimum time is required for the charge and discharge of the capacitance in order to achieve acceptable accuracy. This makes the probe another attractive concept for future tomography systems targeting real-time applications.