Aerodynamic characteristics of the HL-20 and HL-20A lifting-body configurations

The data show that the HL-20 is longitudinally and laterally stable over the test range from Mach 10 to 0.2. At hypersonic speeds it has a trimmed lift/drag ratio of 1.4. This values gives the vehicle a cross range capability similar to that of the Space Shuttle. At subsonic speeds, the HL-20 has a trimmed lift/drag ratio of about 3.6. Replacing the flat plate outboard fins with fins having an airfoil shape, increased the maximum trimmed L/D to 4.3. Preliminary evaluation of configuration modifications (the HL-20A series), indicates that trim at higher values of lift at hypersonic speeds could be achieved with an L/D of about 1.0. In the supersonic range, the lift and directional stability characteristics were improved. The untrimmed subsonic L/D was increased to 5.8 with airfoil fins.

[1]  W. Ray Hook,et al.  Lifting-body option for a Space Station rescue vehicle , 1989 .

[2]  Richard W. Powell,et al.  Utilization of simulation tools in the HL-20 conceptual design process. [passenger-carrying lifting body portion of Personnel Launch System] , 1991 .

[3]  Richard W. Powell,et al.  Performance assessment of a Space Station rescue and personnel/logistics vehicle , 1990 .

[4]  Christopher I. Cruz,et al.  Aerodynamic Characteristics of a Proposed Personnel Launch System (PLS) Lifting-Body Configuration at Mach Numbers from 0.05 to 20.3. Supplement , 1989 .

[5]  John R. Micol.  Experimental and predicted aerodynamic characteristics of a proposed Assured Crew Return Vehicle (ACRV) lifting-body configuration at Mach 6 and 10 , 1990 .

[6]  Richard W. Powell,et al.  Ascent, abort, and entry capability assessment of a Space Station rescue and personnel/logistics vehicle , 1989 .

[7]  George M. Ware.  Transonic aerodynamic characteristics of a proposed Assured Crew Return Capability (ACRC) lifting-body configuration , 1989 .

[8]  G. L. Brauer,et al.  Capabilities and applications of the Program to Optimize Simulated Trajectories (POST). Program summary document , 1977 .

[9]  Thomas J. Horvath,et al.  Aerothermodynamic measurements on a proposed assured crew return vehicle (ACRV) lifting-body configuration at Mach 6 and 10 in air , 1990 .

[10]  E. B. Jackson,et al.  Piloted simulator studies of the HL-20 Lifting Body , 1991 .

[11]  Richard W. Powell,et al.  Guidance and control analysis of the entry of a lifting body personnel launch vehicle , 1991 .

[12]  George M. Ware,et al.  Aerodynamic characteristics of proposed assured crew return capability (ACRC) configurations , 1989 .

[13]  Melvin L. Bailey,et al.  Effect of lift-to-drag ratio upon pilot rating for a preliminary version of the HL-20 lifting body , 1991 .