Combination of finite element modeling and optimization for the study of lumbar spine biomechanics considering the 3D thorax-pelvis orientation.

A model of the lumbar spine capable of taking into account realistic loads derived from human activity would be of great benefit in studying its normal biomechanical functioning as well as its in vivo behavior in injured and surgically altered states. This paper proposes a method to analyze the mechanical response of the lumbar spine subjected to loads derived from human activity, combining a non-linear finite element model (FEM) and an optimization-based force predicting algorithm. Loads borne by the lumbar spine at the T12-L1 level (joint loads) are first predicted with the optimization algorithm and then applied to the FEM, while a boundary condition prescribing the relative L1-sacrum rotation is imposed onto the FEM to account for three-dimensional physiological thorax-pelvis orientation. The prescribed rotation is achieved through the application of moments on L1. To account for the effect of these moments on lumbar joint loads, an iteration between the optimization technique and the FEM computation has been carried out. This method provides two main benefits over previous studies: first, it allows for the application of any 3D loading condition while considering the real 3D rotation measured between the thorax and the pelvis, and second, it makes it possible to estimate the moments that must be applied on L1 in order to maintain this rotation, taking them into account when predicting joint loads. As an example application of the method, results are presented for the lumbar spine mechanical response at the time of peak T12-L1 joint force during walking.

[1]  R. Norman,et al.  1986 Volvo Award in Biomechanics: Partitioning of the L4 - L5 Dynamic Moment into Disc, Ligamentous, and Muscular Components During Lifting , 1986, Spine.

[2]  K. Markolf.  Deformation of the thoracolumbar intervertebral joints in response to external loads: a biomechanical study using autopsy material. , 1972, The Journal of bone and joint surgery. American volume.

[3]  J H van Dieën,et al.  Are recruitment patterns of the trunk musculature compatible with a synergy based on the maximization of endurance? , 1997, Journal of biomechanics.

[4]  M Parnianpour,et al.  Effect of changes in lordosis on mechanics of the lumbar spine-lumbar curvature in lifting. , 1999, Journal of spinal disorders.

[5]  L. Claes,et al.  New in vivo measurements of pressures in the intervertebral disc in daily life. , 1999, Spine.

[6]  W. Marras,et al.  Spine loading during trunk lateral bending motions. , 1997, Journal of biomechanics.

[7]  W. Lo,et al.  Stress analysis of the disc adjacent to interbody fusion in lumbar spine. , 2001, Medical engineering & physics.

[8]  Francisco Ezquerro Juanco,et al.  Modelado biomecanico de la columna lumbar humana. Aplicación al estudio de la fijacion transpedicular , 2001 .

[9]  Albert B. Schultz,et al.  Mechanical Properties of Human Lumbar Spine Motion Segments—Part II: Responses in Compression and Shear; Influence of Gross Morphology , 1979 .

[10]  F Lavaste,et al.  Three-dimensional geometrical and mechanical modelling of the lumbar spine. , 1992, Journal of biomechanics.

[11]  A Shirazi-Adl,et al.  Mechanical Response of a Lumbar Motion Segment in Axial Torque Alone and Combined with Compression , 1986, Spine.

[12]  F. Ezquerro Juanco,et al.  Modelo de elementos finitos de la columna lumbar , 1999 .

[13]  Manohar M. Panjabi,et al.  Clinical Biomechanics of the Spine , 1978 .

[14]  R. Hughes,et al.  Evaluation of muscle force prediction models of the lumbar trunk using surface electromyography , 1994, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[15]  H. M. Karara,et al.  Direct Linear Transformation from Comparator Coordinates into Object Space Coordinates in Close-Range Photogrammetry , 2015 .

[16]  R. Crowninshield,et al.  A physiologically based criterion of muscle force prediction in locomotion. , 1981, Journal of biomechanics.

[17]  Vladimir M. Zatsiorsky,et al.  The Mass and Inertia Characteristics of the Main Segments of the Human Body , 1983 .

[18]  A B Schultz,et al.  Biomechanical model calculation of muscle contraction forces: a double linear programming method. , 1988, Journal of biomechanics.

[19]  V. Goel,et al.  Prediction of biomechanical parameters in the lumbar spine during static sagittal plane lifting. , 1998, Journal of biomechanical engineering.

[20]  G. Bergmann,et al.  Estimation of muscle forces in the lumbar spine during upper-body inclination. , 2001, Clinical biomechanics.

[21]  R E Hughes,et al.  Effect of optimization criterion on spinal force estimates during asymmetric lifting. , 2000, Journal of biomechanics.

[22]  Shrawan Kumar,et al.  A nonlinear optimization force model of the human lumbar spine , 1991 .

[23]  I. Stokes,et al.  The Effects of Abdominal Muscle Coactivation on Lumbar Spine Stability , 1998, Spine.

[24]  A Shirazi-Adl,et al.  Nonlinear Response Analysis of the Human Ligamentous Lumbar Spine in Compression: On Mechanisms Affecting the Postural Stability , 1993, Spine.

[25]  A. M. Ahmed,et al.  Some static mechanical properties of the lumbar intervertebral joint, intact and injured. , 1982, Journal of biomechanical engineering.

[26]  Stability , 1973 .

[27]  A. Schultz,et al.  Analysis of Loads on the Lumbar Spine , 1981, Spine.

[28]  A Rohlmann,et al.  Estimation of trunk muscle forces using the finite element method and in vivo loads measured by telemeterized internal spinal fixation devices. , 1999, Journal of biomechanics.

[29]  W. Marras,et al.  An EMG-assisted model of loads on the lumbar spine during asymmetric trunk extensions. , 1993, Journal of biomechanics.

[30]  M M Panjabi,et al.  Human Lumbar Vertebrae: Quantitative Three-Dimensional Anatomy , 1992, Spine.

[31]  S Gracovetsky,et al.  The Nature of Instability , 1984, Spine.

[32]  V. Goel,et al.  CT-based geometric data of human spine musculature. Part I. Japanese patients with chronic low back pain. , 1992, Journal of spinal disorders.

[33]  V K Goel,et al.  A combined finite element and optimization investigation of lumbar spine mechanics with and without muscles. , 1993, Spine.

[34]  J Dubousset,et al.  A Biomechanical Analysis of Short Segment Spinal Fixation Using a Three-Dimensional Geometric and Mechanical Model , 1993, Spine.

[35]  D. Chaffin,et al.  Distributed moment histogram: a neurophysiology based method of agonist and antagonist trunk muscle activity prediction. , 1996, Journal of biomechanics.

[36]  M. Panjabi,et al.  Effects of Disc Injury on Mechanical Behavior of the Human Spine , 1984, Spine.

[37]  J. Weinstein,et al.  Biomechanics of the Spine: Clinical and Surgical Perspective , 1989 .

[38]  M. Parnianpour,et al.  Synergy of the human spine in neutral postures , 1998, European Spine Journal.

[39]  Jaap H. van Dieën,et al.  Are recruitment patterns of the trunk musculature compatible with a synergy based on the maximization of endurance , 1997 .

[40]  A B Schultz,et al.  Load displacement behavior of the human Lumbo‐sacral joint , 1987, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[41]  A. Schultz,et al.  Mechanical Properties of Human Lumbar Spine Motion Segments—Part I: Responses in Flexion, Extension, Lateral Bending, and Torsion , 1979 .

[42]  I A Stokes,et al.  Quantitative anatomy of the lumbar musculature. , 1999, Journal of biomechanics.