Influence of geometric scaling on the elasto-kinematic properties of flexure hinges and compliant mechanisms

Abstract Flexure hinges with notches are typical elements in high-precision compliant mechanisms with a wide variety of sizes from macro to micro or nano applications. This paper investigates the elasto-kinematic hinge and mechanism properties in dependence of scaling the geometric parameters regarding the impact of using optimized flexure hinge contours within a unified synthesis method without the need of rerunning simulations. The three performance criteria stiffness, maximum strain, and precision are analyzed among others for a single symmetric flexure hinge and a parallel four-bar linkage. The analytical investigations and FEM simulations include semi-circular, corner-filleted, and special 6th-order polynomial hinge contours. Accordingly, the chosen rigid-body model is transferred into a compliant mechanism through replacing all revolute joints by notch hinges. Geometric scaling is investigated with a parametric non-linear FEM model for factors from 0.1 to 2. To obtain results for comparable relative hinge angles, the defined input displacement is scaled too. Three prototypes are tested to verify the simulations and to validate the influence of scaling by measurement. In addition to general scale dependencies of the properties it is shown, that optimized flexure hinge contours are promising for miniaturized compliant mechanisms with high precision and large stroke at once.

[1]  Zhijiang Du,et al.  Multi-objective optimization of a type of ellipse-parabola shaped superelastic flexure hinge , 2016 .

[2]  David Zhang,et al.  Three flexure hinges for compliant mechanism designs based on dimensionless graph analysis , 2010 .

[3]  Y. Tseytlin.  Notch flexure hinges: An effective theory , 2002 .

[4]  Vincenzo Parenti-Castelli,et al.  A novel technique for position analysis of planar compliant mechanisms , 2005 .

[5]  Pier Paolo Valentini,et al.  Elasto-kinematic comparison of flexure hinges undergoing large displacement , 2017 .

[6]  J. Paros.  How to design flexure hinges , 1965 .

[7]  Jonathan B. Hopkins,et al.  Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT). Part II: Practice , 2010 .

[8]  Hong Hu,et al.  Accurate Equivalent Beam Model of a Planar Compliant Mechanism with Elliptical Flexure Hinges , 2009, 2009 International Conference on Measuring Technology and Mechatronics Automation.

[9]  Bijan Shirinzadeh,et al.  Robust generalised impedance control of piezo-actuated flexure-based four-bar mechanisms for micro/nano manipulation , 2008 .

[10]  Yves Bellouard,et al.  Shape memory alloy flexures , 2004 .

[11]  Lena Zentner,et al.  Design and Experimental Characterization of a Flexure Hinge-Based Parallel Four-Bar Mechanism for Precision Guides , 2017 .

[12]  Lena Zentner,et al.  The influence of asymmetric flexure hinges on the axis of rotation , 2011 .

[13]  S. Bi,et al.  A unified approach to type synthesis of both rigid and flexure parallel mechanisms , 2011 .

[14]  Qiaoling Meng.  A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics , 2012 .

[15]  R. Bharanidaran,et al.  A modified post-processing technique to design a compliant based microgripper with a plunger using topological optimization , 2017 .

[16]  Wei Li,et al.  Output displacement analysis for compliant single parallel four-bar mechanism , 2010, 2010 IEEE International Conference on Mechatronics and Automation.

[17]  Zhao Hongzhe,et al.  Modeling of a Cartwheel Flexural Pivot , 2009 .

[18]  Sameh H Tawfick,et al.  Compliant microgripper with parallel straight-line jaw trajectory for nanostructure manipulation , 2011 .

[19]  B. Zettl,et al.  On Systematic Errors of Two-Dimensional Finite Element Modeling of Right Circular Planar Flexure Hinges , 2005 .

[20]  Larry L. Howell,et al.  A Method for the Design of Compliant Mechanisms With Small-Length Flexural Pivots , 1994 .

[21]  Saša Zelenika,et al.  Optimized flexural hinge shapes for microsystems and high-precision applications , 2009 .

[22]  T. Noll,et al.  Parallel kinematics for nanoscale Cartesian motions , 2009 .

[23]  Lei Wu,et al.  Analysis of the displacement of lumped compliant parallel-guiding mechanism considering parasitic rotation and deflection on the guiding plate and rigid beams , 2015 .

[24]  Dan Zhang,et al.  Kinetostatic modelling of a 3-PRR planar compliant parallel manipulator with flexure pivots , 2017 .

[25]  Nicolae Lobontiu,et al.  Compliant Mechanisms: Design of Flexure Hinges , 2002 .

[26]  Zhiwei Zhu,et al.  Development of a novel sort of exponent-sine-shaped flexure hinges. , 2013, The Review of scientific instruments.

[27]  Qingsong Xu.  Design and Implementation of Large-Range Compliant Micropositioning Systems , 2016 .

[28]  T. Sadek,et al.  SCALABILITY OF MECHATRONIC SYSTEMS , 2010 .

[29]  Charles J. Kim,et al.  An Instant Center Approach Toward the Conceptual Design of Compliant Mechanisms , 2006 .

[30]  Shorya Awtar,et al.  Closed-Form Nonlinear Analysis of Beam-Based Flexure Modules , 2005 .

[31]  Yanling Tian,et al.  Analysis of parasitic motion in parallelogram compliant mechanism , 2010 .

[33]  Stuart T. Smith,et al.  ELLIPTICAL FLEXURE HINGES , 1997 .

[34]  Nicolae Lobontiu,et al.  Corner-Filleted Flexure Hinges , 2001 .

[35]  Yves Bellouard,et al.  Integrating optics and micro-mechanics in a single substrate: a step toward monolithic integration in fused silica. , 2005, Optics express.

[36]  Niels Tromp,et al.  Design and prototype performance of an innovative cryogenic tip-tilt mirror , 2010, Astronomical Telescopes + Instrumentation.

[37]  Javier Martin,et al.  Novel Flexible Pivot with Large Angular Range and Small Center Shift to be Integrated into a Bio-Inspired Robotic Hand , 2011 .

[38]  Zhaoying Zhou,et al.  Design calculations for flexure hinges , 2002 .

[39]  C. Pan,et al.  Closed-form compliance equations for power-function-shaped flexure hinge based on unit-load method , 2013 .

[40]  J.K. Mills,et al.  MEMS Remote Centre of Compliance Design , 2006, 2006 International Conference on Mechatronics and Automation.

[41]  Lena Zentner,et al.  Contour-independent design equations for the calculation of the rotational properties of commonly used and polynomial flexure hinges , 2017 .

[42]  Simon Henein,et al.  FLEXURE PIVOT FOR AEROSPACE MECHANISMS , 2007 .

[43]  Allan T. Dolovich,et al.  Topology optimization of efficient and strong hybrid compliant mechanisms using a mixed mesh of beams and flexure hinges with strength control , 2018 .

[44]  Lena Zentner,et al.  General design equations for the rotational stiffness, maximal angular deflection and rotational precision of various notch flexure hinges , 2017 .

[45]  Larry L. Howell,et al.  Handbook of compliant mechanisms , 2013 .

[46]  Horacio Ahuett-Garza,et al.  Studies about the use of semicircular beams as hinges in large deflection planar compliant mechanisms , 2014 .

[47]  Eric R. Marsh,et al.  A unified geometric model for designing elastic pivots , 2008 .

[48]  Vladimir Seleznev,et al.  TOPICAL REVIEW: 3D heterostructures and systems for novel MEMS/NEMS , 2009 .

[49]  Nenad D. Pavlović,et al.  Mobility of the compliant joints and compliant mechanisms , 2005 .

[50]  Nenad D. Pavlović,et al.  Synthesis of Compliant Mechanisms based on Goal-Oriented Design Guidelines for Prismatic Flexure Hinges with Polynomial Contours , 2015 .

[51]  Shorya Awtar,et al.  Extensible-Link Kinematic Model for Characterizing and Optimizing Compliant Mechanism Motion , 2014 .

[52]  F. Cosandier,et al.  Development and integration of high straightness flexure guiding mechanisms dedicated to the METAS watt balance Mark II , 2014 .

[53]  Burkhard Corves,et al.  Stiffness-Oriented Design of a Flexure Hinge-Based Parallel Manipulator , 2014 .

[54]  Mary Frecker,et al.  Topological synthesis of compliant mechanisms using multi-criteria optimization , 1997 .

[55]  Philippe Bidaud,et al.  A new compliant mechanism design methodology based on flexible building blocks , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[56]  Stephanus Büttgenbach,et al.  Novel micro-pneumatic actuator for MEMS , 2002 .