Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings

[1]  Y. Mutoh,et al.  Effect of dissolution/precipitation on the residual stress redistribution of plasma-sprayed hydroxyapatite coating on titanium substrate in simulated body fluid (SBF). , 2014, Journal of the mechanical behavior of biomedical materials.

[2]  Christian Rey,et al.  Plasma-Sprayed Apatite Coatings: Review of Physical-Chemical Characteristics and Their Biological Consequences , 2014 .

[3]  K. Alamara,et al.  Calcium phosphate coatings: Morphology, micro-structure and mechanical properties , 2014 .

[4]  Kadhim Alamara,et al.  Micro-Raman spectroscopy shows how the coating process affects the characteristics of hydroxylapatite. , 2013, Acta biomaterialia.

[5]  Huiliang Cao,et al.  Plasma‐Sprayed Ceramic Coatings for Osseointegration , 2013 .

[6]  R. Surmenev.  A review of plasma-assisted methods for calcium phosphate-based coatings fabrication , 2012 .

[7]  C. Rey,et al.  Hydroxyapatite coating on titanium by a low energy plasma spraying mini-gun , 2012 .

[8]  Yung‐Chin Yang.  Investigation of residual stress generation in plasma-sprayed hydroxyapatite coatings with various spraying programs , 2011 .

[9]  Satya Prakash,et al.  Surface characterization of plasma sprayed pure and reinforced hydroxyapatite coating on Ti6Al4V alloy , 2011 .

[10]  S. Zec,et al.  Hydroxyapatite coatings prepared by a high power laminar plasma jet , 2011 .

[11]  A. Kobayashi,et al.  Influence of spray parameters on the microstructure and mechanical properties of gas-tunnel plasma sprayed hydroxyapatite coatings , 2007 .

[12]  T. Lee,et al.  Effect of post vacuum heating on the microstructural feature and bonding strength of plasma-sprayed hydroxyapatite coatings , 2006 .

[13]  K. Khor,et al.  Effect of steam treatment during plasma spraying on the microstructure of hydroxyapatite splats and coatings , 2006, International Thermal Spray Conference.

[14]  C. Kao,et al.  In vitro characterization of postheat-treated plasma-sprayed hydroxyapatite coatings , 2005 .

[15]  C. Berndt,et al.  Thermal Analysis of Amorphous Phases in Hydroxyapatite Coatings , 2005 .

[16]  Xuanyong Liu,et al.  In vivo evaluation of plasma sprayed hydroxyapatite coatings having different crystallinity. , 2004, Biomaterials.

[17]  T. Clyne,et al.  Raman spectroscopy determination of phases within thermal sprayed hydroxyapatite splats and subsequent in vitro dissolution examination , 2004 .

[18]  R. Cloots,et al.  Non-destructive evaluation of crystallinity and chemical composition by Raman spectroscopy in hydroxyapatite-coated implants , 2004 .

[19]  R. Heimann,et al.  Laser‐Raman and Nuclear Magnetic Resonance (NMR) studies on plasma‐sprayed hydroxylapatite coatings: Influence of bioinert bond coats on phase composition and resorption kinetics in simulated body fluid , 2003 .

[20]  Christopher C. Berndt,et al.  Phase, structural and microstructural investigations of plasma sprayed hydroxyapatite coatings , 2003 .

[21]  E. Chang,et al.  The bonding of plasma-sprayed hydroxyapatite coatings to titanium: effect of processing, porosity and residual stress , 2003 .

[22]  Yang Leng,et al.  Characterization of chemical inhomogeneity in plasma-sprayed hydroxyapatite coatings. , 2003, Biomaterials.

[23]  E. Chang,et al.  Influence of deposition temperature on mechanical properties of plasma-sprayed hydroxyapatite coating on titanium alloy with ZrO2 intermediate layer , 2003 .

[24]  K. Khor,et al.  In vitro behavior of HVOF sprayed calcium phosphate splats and coatings. , 2003, Biomaterials.

[25]  G. Daculsi,et al.  Outcome and perspectives in bioactive coatings: What's new, what's coming , 2002 .

[26]  J. Weimer,et al.  Influence of coating strain on calcium phosphate thin-film dissolution. , 2001, Journal of biomedical materials research.

[27]  A. Boskey,et al.  Physicochemical study of plasma-sprayed hydroxyapatite-coated implants in humans. , 2001, Journal of biomedical materials research.

[28]  Y. Leng,et al.  Chemical gradient in plasma-sprayed HA coatings. , 2000, Biomaterials.

[29]  K. Khor,et al.  Plasma-sprayed hydroxyapatite (HA) coatings with flame-spheroidized feedstock: microstructure and mechanical properties. , 2000, Biomaterials.

[30]  K. Gross,et al.  Identification and mapping of the amorphous phase in plasma-sprayed hydroxyapatite coatings using scanning cathodoluminescence microscopy , 1998, Journal of materials science. Materials in medicine.

[31]  C. Berndt,et al.  Oxyapatite in hydroxyapatite coatings , 1998 .

[32]  C. Berndt,et al.  Amorphous phase formation in plasma-sprayed hydroxyapatite coatings. , 1998, Journal of biomedical materials research.

[33]  R. Cuscó,et al.  Differentiation between hydroxyapatite and β-tricalcium phosphate by means of μ-Raman spectroscopy , 1998 .

[34]  O. Sbaizero,et al.  Mechanical and chemical consequences of the residual stresses in plasma sprayed hydroxyapatite coatings. , 1997, Biomaterials.

[35]  W. Tong,et al.  Amorphorization and recrystallization during plasma spraying of hydroxyapatite. , 1995, Biomaterials.

[36]  A. Cigada,et al.  Post-deposition treatment effects on hydroxyapatite vacuum plasma spray coatings , 1994 .