Failure pressure calculation of fracturing well based on fluid-structure interaction

Failure pressure is a key parameter in reservoir hydrofracturing operation. Existing analytical methods for calculating the failure pressure are based on the assumption that borehole fluid is under two extreme conditions: non-infiltration or complete infiltration. The assumption is not suitable for the actual infiltration process, and this will cause a great error in practical calculation. It shows that during the injection process, the dynamic variation in effective stress-dependent permeability has an influence on the infiltration, and the influence also brings about calculation errors. Based on the fluid-structure interaction and finite element method (FEM), considering partial infiltration during injection process, a numerical model for calculating rock failure pressure is established. According to the analysis of permeability test results and response-surface method, a new variation rule of rock permeability with the change of effective stress is presented, and the relationships among the permeability, confining pressure and pore pressure are proposed. There are some differences between the dynamic value of permeability-effective-stress coefficient observed herein and the one obtained by the classical theory. Combining with the numerical model and the dynamic permeability, a coupling method for calculating failure pressure is developed. Comparison of field data and calculated values obtained by various methods shows that accurate values can be obtained by the coupling method. The coupling method can be widely applied to the calculation of failure pressure of reservoirs and complex wells to achieve effective fracturing operation.

[1]  LI Pei-chao,et al.  Mathematical modeling of flow in saturated porous media on account of fluid-structure coupling effect , 2003 .

[2]  Derek J. Pike,et al.  Empirical Model‐building and Response Surfaces. , 1988 .

[3]  K. Terzaghi,et al.  Soil mechanics in engineering practice , 1948 .

[4]  Ran Yijun.  NUMERICAL CALCULATION OF ROCK BREAKDOWN PRESSURE DURING HYDRAULIC FRACTURING PROCESS , 2009 .

[5]  Charles Fairhurst,et al.  Initiation and Extension of Hydraulic Fractures in Rocks , 1967 .

[6]  Ben A. Eaton,et al.  Fracture Gradient Prediction and Its Application in Oilfield Operations , 1969 .

[7]  Lawrence W. Teufel,et al.  Coupled fluid flow and geomechanics in reservoir study. I. Theory and governing equations , 1995 .

[8]  O. Zienkiewicz,et al.  Dynamic behaviour of saturated porous media; The generalized Biot formulation and its numerical solution , 1984 .

[9]  P. Longuemare,et al.  Geomechanics in Reservoir Simulation: Overview of Coupling Methods and Field Case Study , 2002 .

[10]  George E. P. Box,et al.  Empirical Model‐Building and Response Surfaces , 1988 .

[11]  S. R. Daines.  831136 Prediction of fracture pressure for wildcat wells : J Pet Technol, V34, N4, April 1982, P863–872 , 1983 .

[12]  Yves Bernabé,et al.  Effective pressure law for permeability of E‐bei sandstones , 2009 .

[13]  Xiao Wenlian.  Research on calculation of effective stress in low-permeability sandstone rock under cyclic loading and unloading , 2009 .

[14]  Xiao Wen.  Laboratory study of the effective pressure law for permeability in Ta-Ba-Miao low-permeability sandstones , 2009 .

[15]  Stephen R. Daines,et al.  Prediction of Fracture Pressures for Wildcat Wells , 1982 .

[16]  O. C. Zienkiewicz,et al.  The Finite Element Method: Basic Formulation and Linear Problems , 1987 .

[17]  M. King Hubbert,et al.  Mechanics of Hydraulic Fracturing , 1972 .

[18]  Li Li.  FINITE ELEMENT NUMERICAL SIMULATION OF SEEPAGE IN AN ANISOTROPIC RESERVOIR , 2007 .