Evaluation of axial dispersion and mixing performance in oscillatory baffled reactors using CFD

Background The paper reports extensive CFD work and analyses of an oscillatory baffled reactor (OBR) planned to be used for the production of polyaniline continuously. In the polyaniline process, viscosity changes during the course of the reaction. Two non-Newtonian fluids were used to represent the stages of fluids during the reaction in a simulation, in addition to water as the reference fluid. Two quantitative measures derived from the CFD results are employed to evaluate OBR reactor performance: the axial dispersion coefficient and the ratio of axial and transverse velocities. Results The CFD data showed that the dispersion coefficient as a function of viscosity exhibits a maximum for given oscillation parameters. In the turbulent regime, the axial dispersion is often correlated with the oscillatory Reynolds number in OBR or equivalent Reynolds numbers in other reactor devices. In the high viscosity regime, such a general correlation is not valid for different operational parameters. The results of the CFD simulations in the moving baffle-OBR indicate, for the first time, that the axial dispersion coefficients in the moving baffle arrangement is 10–17% higher than that in the moving fluid type, due to enhanced shear rate in the former device. This quantitative information is valuable for the design and smooth transition from batch to continuous reactors. Conclusion The established dependence of axial dispersion and the ratio of axial to transverse velocities on both viscosity and the operational parameters enhanced the understanding of mixing and dispersion characteristics of the OBR. The CFD analysis supplied the information needed to determine the design parameters for the reactor used in continuous production of polyaniline.© 2012 Society of Chemical Industry

[1]  Shear-augmented dispersion in non-Newtonian fluids , 1993, Annals of Biomedical Engineering.

[2]  Xiongwei Ni,et al.  Parameters affecting fluid dispersion in a continuous oscillatory baffled tube , 2000 .

[3]  Octave Levenspiel,et al.  Notes on the diffusion-type model for the longitudinal mixing of fluids in flow , 1995 .

[4]  Malcolm R. Mackley,et al.  Heat transfer and associated energy dissipation for oscillatory flow in baffled tubes , 1995 .

[5]  X. Ni,et al.  Using non‐intrusive laser‐induced fluorescence in the characterisation of mixing in an oscillatory baffled column , 2003 .

[6]  Xiongwei Ni,et al.  A comparative study of mass transfer in yeast for a batch pulsed baffled bioreactor and a stirred tank fermenter , 1995 .

[7]  P. V. Danckwerts.  Continuous flow systems , 1953 .

[8]  Malcolm R. Mackley,et al.  Mixing and dispersion in a baffled tube for steady laminar and pulsatile flow , 1991 .

[9]  P. Legentilhomme,et al.  Residence time distribution of a purely viscous non-Newtonian fluid in helically coiled or spatially chaotic flows , 2006 .

[10]  X. Ni.  A study of fluid dispersion in oscillatory flow through a baffled tube , 1995 .

[11]  Reinaldo Giudici,et al.  Analysis of axial dispersion in an oscillatory-flow continuous reactor , 2003 .

[12]  Power Law Fluids in a Circular Curved Tube. Part II. Axial Laminar Dispersion , 1993 .

[13]  Soon Huat Tan,et al.  Cytocompatibility and Mechanical Properties of Hydroxyapatite Composite Reinforced with Multi-Walled Carbon Nanotubes and Bovine Serum Albumin , 2013 .

[14]  Malcolm R. Mackley,et al.  Experimental fluid dispersion measurements in periodic baffled tube arrays , 1993 .

[15]  Hongbing Jian,et al.  An investigation of the effect of viscosity on mixing in an oscillatory baffled column using digital particle image velocimetry and computational fluid dynamics simulation , 2005 .

[16]  X. Ni,et al.  Inverse phase suspension polymerization of acrylamide in a batch oscillatory baffled reactor , 2000 .

[17]  Malcolm R. Mackley,et al.  Experimental heat transfer measurements for pulsatile flow in baffled tubes , 1990 .

[18]  Xiongwei Ni,et al.  Correlation of polymer particle size with droplet size in suspension polymerisation of methylmethacrylate in a batch oscillatory-baffled reactor , 1999 .

[19]  Xiongwei Ni,et al.  A Systematic Study of the Effect of Geometrical Parameters on Mixing Time in Oscillatory Baffled Columns , 1998 .

[20]  Gerry Steele,et al.  Continuous Crystallization of Pharmaceuticals Using a Continuous Oscillatory Baffled Crystallizer , 2009 .

[21]  Xiongwei Ni,et al.  On the determination of axial dispersion coefficient in a batch oscillatory baffled column using laser induced fluorescence , 2003 .

[22]  Aniruddha B. Pandit,et al.  Enhancement of gas-liquid mass transfer using oscillatory flow in a baffled tube , 1993 .