Estimation of heat-transfer characteristics on a fin under wet conditions

Abstract The finite difference method in conjunction with the least-squares scheme and experimental temperature data is proposed to solve the one-dimensional (1-D) and two-dimensional (2-D) inverse heat conduction problems in order to predict the average overall heat-transfer coefficient h ¯ on a fin and wet fin efficiency ηf for various air speeds under wet conditions. The sensitive and overall heat-transfer coefficients on the fin, the Lewis number and the functional form between the relative humidity and fin temperature are unknown a priori in the present study. In addition, the sensitive and overall heat-transfer coefficients on the fin are also assumed to be non-uniform. Thus the whole fin is divided into several sub-fin regions in order to predict the h ¯ and ηf values. Variations of these two predicted values with the relative humidity (RH) for various air speeds can be obtained using the present inverse scheme in conjunction with measured fin temperatures. In order to validate the accuracy and reliability of the present inverse scheme, a comparison between the present estimates obtained from the 1-D and 2-D models and exact values is made using simulated temperature data. The results show that the present estimates of the h ¯ value obtained from the 1-D and 2-D models agree well with the exact values even for the case with the measurement errors. Variations of the h ¯ and ηf values obtained from 2-D model with the RH value are similar to those obtained from 1-D model for various air speeds. However, the present estimates of the h ¯ and ηf values obtained from the 2-D model an slightly deviate from those obtained from the 1-D model. It is worth mentioning that the deviation between the h ¯ value in the downstream region and that in the upstream region can be observed using the 2-D model. This phenomenon cannot be obtained from the 1-D model.

[1]  A. Colburn,et al.  Mass Transfer (Absorption) Coefficients Prediction from Data on Heat Transfer and Fluid Friction , 1934 .

[2]  J. P. Holman,et al.  Experimental methods for engineers , 1971 .

[3]  Mahmood Yaghoubi,et al.  A numerical study of convective heat transfer from an array of parallel blunt plates , 1997 .

[4]  J. P. Hartnett,et al.  Handbook of Heat Transfer Fundamentals (Second Edition) , 1986 .

[5]  Han-Taw Chen,et al.  Estimation of surface absorptivity in laser surface heating process with experimental data , 2006 .

[6]  F. Kreith,et al.  Principles of heat transfer , 1962 .

[7]  Han-Taw Chen,et al.  Estimation of Surface Conditions for Nonlinear Inverse Heat Conduction Problems Using the Hybrid Inverse Scheme , 2007 .

[8]  Han-Taw Chen,et al.  Estimation of heat transfer coefficient on the vertical plate fin of finned-tube heat exchangers for various air speeds and fin spacings , 2007 .

[9]  Balaram Kundu,et al.  Performance and optimum design analysis of longitudinal and pin fins with simultaneous heat and mass transfer: Unified and comparative investigations , 2007 .

[10]  Han-Taw Chen,et al.  Investigation of natural-convection heat transfer coefficient on a vertical square fin of finned-tube heat exchangers. , 2006 .

[11]  Ephraim M Sparrow,et al.  Local and average transfer coefficients for one-row plate fin and tube heat exchanger configurations , 1974 .

[12]  C. Sheppard,et al.  Fin performance with condensation from humid air: a numerical investigation , 1989 .

[13]  J. W. Ramsey,et al.  Thermal Environmental Engineering , 1970 .

[14]  A. Nowak,et al.  Inverse thermal problems , 1995 .

[15]  S. Y. Liang,et al.  Comparison of one-dimensional and two-dimensional models for wet-surface fin efficiency of a plate-fin-tube heat exchanger , 2000 .

[16]  Jiin-Yuh Jang,et al.  A two-dimensional fin efficiency analysis of combined heat and mass transfer in elliptic fins , 2002 .

[17]  L. Rosario,et al.  Analysis of heat transfer in a partially wet radial fin assembly during dehumidification , 1999 .

[18]  Chi-Chuan Wang,et al.  Performance of Rectangular Fin in Wet Conditions: Visualization and Wet Fin Efficiency , 2001 .

[19]  L.-T. Chen.  Two-dimensional fin efficiency with combined heat and mass transfer between water-wetted fin surface and moving moist airstream , 1991 .

[20]  Han-Taw Chen,et al.  Prediction of heat transfer coefficient on the fin inside one-tube plate finned-tube heat exchangers , 2005 .

[21]  W. Rohsenow,et al.  Handbook of Heat Transfer Fundamentals , 1985 .

[22]  Wei-Lun Hsu,et al.  Estimation of heat transfer coefficient on the fin of annular-finned tube heat exchangers in natural convection for various fin spacings , 2007 .

[23]  Han-Taw Chen,et al.  Estimation of Heat Transfer Coefficient in Two-Dimensional Inverse Heat Conduction Problems , 2006 .