Effect of tool profile on wear and mechanical behaviors of CeO2 and ZrO2-reinforced hybrid magnesium matrix composite developed via FSP technique

[1]  V. Mohanavel,et al.  Improving the wear resistance and mechanical properties of hybridized AZ80 Mg/CeO2+ZrO2 surface composite by friction stir processing: Effect of pin geometry , 2023, Vacuum.

[2]  V. K. Gobinath,et al.  Investigations on microstructure, thermo-mechanical and tribological behavior of graphene oxide reinforced AA7075 surface composites developed via friction stir processing , 2023, Journal of Manufacturing Processes.

[3]  M. Aliha,et al.  Investigating the role of different components of friction stir welding tools on the generated heat and strain , 2023, Forces in Mechanics.

[4]  K. Saraswathamma,et al.  Impact of tool pin profiles in friction stir welding process-A review , 2022, Materials Today: Proceedings.

[5]  Baosong Li,et al.  Effects of cerium oxide doping on microstructure and properties of Ni-GO-CeO2 nanocomposite coatings , 2022, Journal of Materials Research and Technology.

[6]  G. Grant,et al.  Effect of tool design and pass strategy on defect elimination and uniform, enhanced tensile properties of friction stir processed high-pressure die-cast A380 alloy , 2022, Materials Science and Engineering: A.

[7]  V. Mohanavel,et al.  Probe-less friction stir spot processing (PFSSP) of AA5754/AA5083 joint by adding the B4C ceramics: Effect of shoulder features on mechanical properties and tribological behavior , 2022, Vacuum.

[8]  G. Wei,et al.  Good strength-plasticity compatibility of GNP/AZ31 composites fabricated by FSP: microstructural evolution and mechanical properties , 2022, Journal of Materials Research and Technology.

[9]  V. Mohanavel,et al.  Impact of multiple FSP passes on structure, mechanical, tribological and corrosion behaviors of AA6061/316 stainless-steel reinforced Al matrix composites , 2022, Surface and Coatings Technology.

[10]  S. Mehrez,et al.  Fabrication of AA6061/316 composites via a double pin FSP tool , 2022, Journal of Materials Research and Technology.

[11]  N. Enzinger,et al.  Manufacturing of coarse and ultrafine-grained aluminum matrix composites reinforced with Al2O3 nanoparticles via friction stir processing , 2022, Journal of Manufacturing Processes.

[12]  V. Singh,et al.  Microstructural, mechanical and wear behavior of A7075 surface composite reinforced with WC and ZrSiO4 nanoparticle through friction stir processing , 2021, Journal of Manufacturing Processes.

[13]  S. Mehrez,et al.  Improvement of mechanical and wear behavior by the development of a new tool for the Friction Stir Processing of Mg/B4C composite , 2021, Surface and Coatings Technology.

[14]  Jing Zhang,et al.  Microstructure, mechanical properties and corrosion resistance of AZ31/GNPs composites prepared by friction stir processing , 2021, Journal of Materials Research and Technology.

[15]  S. Ghosh,et al.  Effect of processing speed on wear and corrosion behavior of novel MoS2 and CeO2 reinforced hybrid aluminum matrix composites fabricated by friction stir processing , 2021 .

[16]  Shujun Chen,et al.  Friction stir butt welding of magnesium alloy to steel by truncated cone-shaped stirring pin with threads , 2021 .

[17]  I. Dinaharan,et al.  Assessment of Ti-6Al-4V particles as a reinforcement for AZ31 magnesium alloy-based composites to boost ductility incorporated through friction stir processing , 2021 .

[18]  Wenya Li,et al.  Effect of an improved pin design on weld formability and mechanical properties of adjustable-gap bobbin-tool friction stir welded Al-Cu aluminum alloy joints , 2020 .

[19]  R. Taghiabadi,et al.  Enhancing the mechanical and tribological properties of Mg2Si-rich aluminum alloys by multi-pass friction stir processing , 2020, Materials Chemistry and Physics.

[20]  B. Babaei,et al.  Role of Mg2Si particles on mechanical, wear, and corrosion behaviors of friction stir welding of AA6061-T6 and Al-Mg2Si composite , 2020 .

[21]  I. Dinaharan,et al.  Development of titanium particulate reinforced AZ31 magnesium matrix composites via friction stir processing , 2020 .

[22]  E. Balasubramanian,et al.  Effect of tool pin profile on corrosion behavior of friction stir processed LM25AA 10% SiCp metal matrix composites , 2020 .

[23]  D. Verma,et al.  Influence of tool rotation speeds on mechanical and morphological properties of friction stir processed nano hybrid composite of MWCNT-Graphene-AZ31 magnesium , 2019, Journal of Magnesium and Alloys.

[24]  A. Heidarzadeh,et al.  Influence of multi-pass FSP on the microstructure, mechanical properties and tribological characterization of Al/B4C composite fabricated by accumulative roll bonding (ARB) , 2019, Surface and Coatings Technology.

[25]  M. H. Hasanniya,et al.  Microstructure and mechanical properties of autobody steel joined by friction stir spot welding , 2019, Sādhanā.

[26]  Yifu Shen,et al.  Dissimilar friction stir welding of aluminum alloys adopting a novel dual-pin tool: Microstructure evolution and mechanical properties , 2018, Journal of Manufacturing Processes.

[27]  A. Asgari,et al.  Mechanical Properties and Wear Behavior of AA5182/WC Nanocomposite Fabricated by Friction Stir Welding at Different Tool Traverse Speeds , 2018, Journal of Materials Engineering and Performance.

[28]  E. Kaluç,et al.  Understanding the role of welding parameters and tool profile on the morphology and properties of expelled flash of spot welds , 2016 .

[29]  X. Du,et al.  Microstructure and Mechanical Properties of Nano-ZrO2 and Nano-SiO2 Particulate Reinforced AZ31-Mg Based Composites Fabricated by Friction Stir Processing , 2007 .

[30]  V. Balasubramanian,et al.  Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminium alloy , 2007 .

[31]  Haiyan Chen,et al.  Microstructure and corrosion behavior of Al-Ti-TiC-CNTs/AZ31 magnesium matrix composites prepared using laser cladding and high speed friction stir processing , 2022, Optics & Laser Technology.

[32]  Akash Gupta,et al.  Effect of various tool pin profiles on temperature rise and mechanical properties of friction stir processed AZ31Mg alloy , 2018 .

[33]  Noor Zaman Khan,et al.  Effect Of Different Tool Pin Profiles On The Joint Quality Of Friction Stir Welded AA 6063 , 2018 .

[34]  F. Aydın,et al.  Prediction of wear performance of ZK60 / CeO2 composites using machine learning models , 2022, Tribology International.