It has been proposed to convert the National Institute of Standards and Technology (NIST) research reactor, known as the NBSR, from high-enriched uranium (HEU) fuel to low-Enriched uranium (LEU) fuel. The motivation to convert the NBSR to LEU fuel is to reduce the risk of proliferation of special nuclear material. This report is a compilation of relevant information from recent studies related to the proposed conversion using a metal alloy of LEU with 10 w/o molybdenum. The objective is to inform the design of the mini-plate and full-size-Plate irradiation experiments that are being planned. This report provides relevant dimensions of the fuel elements, and the following parameters at steady state: average and maximum fission rate density and fission density, fuel temperature distribution for the plate with maximum local temperature, and two-dimensional heat flux profiles of fuel plates with high power densities. The latter profiles are given for plates in both the inner and outer core zones and for cores with both fresh and depleted shim arms (reactivity control devices). A summary of the methodology to obtain these results is presented. Fuel element tolerance assumptions and hot channel factors used in the safety analysis are also given.
[1]
D. Diamond,et al.
Calculation of Design Parameters for an Equilibrium LEU Core in the NBSR
,
2011
.
[2]
N. E. Woolstenhulme,et al.
DDE-MURR Status Report of Conceptual Design Activities
,
2012
.
[3]
Y. Kim,et al.
U-Mo fuels handbook. Version 1.0
,
2006
.
[4]
Nicholas R. Brown,et al.
Accident Analysis for the NIST Research Reactor Before and After Fuel Conversion
,
2012
.
[5]
Nicholas R. Brown,et al.
Local Burn-Up Effects in the NBSR Fuel Element
,
2013
.
[6]
Nicholas R. Brown,et al.
Effect of Shim Arm Depletion in the NBSR
,
2013
.
[7]
N. Zuber,et al.
POINT OF NET VAPOR GENERATION AND VAPOR VOID FRACTION IN SUBCOOLED BOILING
,
1974
.
[8]
Y. Sudo,et al.
Improvement of Critical Heat Flux Correlation for Research Reactors using Plate-Type Fuel
,
1998
.