Optimization of 3D Print Material for the Recreation of Patient-Specific Temporal Bone Models

Objective: Identify the 3D printed material that most accurately recreates the visual, tactile, and kinesthetic properties of human temporal bone Subjects and Methods: Fifteen study participants with an average of 3.6 years of postgraduate training and 56.5 temporal bone (TB) procedures participated. Each participant performed a mastoidectomy on human cadaveric TB and five 3D printed TBs of different materials. After drilling each unique material, participants completed surveys to assess each model’s appearance and physical likeness on a Likert scale from 0 to 10 (0 = poorly representative, 10 = completely life-like). The 3D models were acquired by computed tomography (CT) imaging and segmented using 3D Slicer software. Results: Polyethylene terephthalate (PETG) had the highest average survey response for haptic feedback (HF) and appearance, scoring 8.3 (SD = 1.7) and 7.6 (SD = 1.5), respectively. The remaining plastics scored as follows for HF and appearance: polylactic acid (PLA) averaged 7.4 and 7.6, acrylonitrile butadiene styrene (ABS) 7.1 and 7.2, polycarbonate (PC) 7.4 and 3.9, and nylon 5.6 and 6.7. Conclusion: A PETG 3D printed temporal bone models performed the best for realistic appearance and HF as compared with PLA, ABS, PC, and nylon. The PLA and ABS were reliable alternatives that also performed well with both measures.

[1]  Allison M. Okamura,et al.  Vibration feedback models for virtual environments , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[2]  A. Duffy,et al.  Evolution of surgical skills training. , 2006, World journal of gastroenterology.

[3]  Chi Mao,et al.  [Application of CTA and CAD\CAM techniques in mandible reconstruction with free fibula flap]. , 2006, Zhonghua zheng xing wai ke za zhi = Zhonghua zhengxing waike zazhi = Chinese journal of plastic surgery.

[4]  Xin Xu,et al.  [Application of CAD/CAM techniques in mandible large-scale defect and reconstruction with vascularized fibular bone graft]. , 2007, Zhejiang da xue xue bao. Yi xue ban = Journal of Zhejiang University. Medical sciences.

[5]  Karupppasamy Subburaj,et al.  Rapid development of auricular prosthesis using CAD and rapid prototyping technologies. , 2007, International journal of oral and maxillofacial surgery.

[6]  K. Mori,et al.  Modified three-dimensional skull base model with artificial dura mater, cranial nerves, and venous sinuses for training in skull base surgery: technical note. , 2008, Neurologia medico-chirurgica.

[7]  E. Copeland.  Cumulative Operative Experience Is Decreasing During General Surgery Residency: A Worrisome Trend for Surgical Trainees? , 2009 .

[8]  D. Bakhos,et al.  Three-Dimensional Modeling of the Temporal Bone for Surgical Training , 2010, Otology & neurotology : official publication of the American Otological Society, American Neurotology Society [and] European Academy of Otology and Neurotology.

[9]  Don Stredney,et al.  Training and simulation in otolaryngology. , 2011, Otolaryngologic clinics of North America.

[10]  Milan Sonka,et al.  3D Slicer as an image computing platform for the Quantitative Imaging Network. , 2012, Magnetic resonance imaging.

[11]  K. Horvath,et al.  The general surgery chief resident operative experience: 23 years of national ACGME case logs. , 2013, JAMA surgery.

[12]  M. Hansen,et al.  Resident Participation in Cadaveric Temporal Bone Dissection Correlates With Improved Performance on a Standardized Skill Assessment Instrument , 2014, Otology & neurotology : official publication of the American Otological Society, American Neurotology Society [and] European Academy of Otology and Neurotology.

[13]  Vairavan Narayanan,et al.  Endoscopic skull base training using 3D printed models with pre-existing pathology , 2014, European Archives of Oto-Rhino-Laryngology.

[14]  Fernán Gonzalez Bernaldo de Quirós,et al.  3D Printed Models and Navigation for Skull Base Surgery: Case Report and Virtual Validation , 2015, MedInfo.

[15]  N. Tolley,et al.  Construct validity of cadaveric temporal bones for training and assessment in mastoidectomy , 2015, The Laryngoscope.

[16]  Jeffrey H. Siewerdsen,et al.  3D Rapid Prototyping for Otolaryngology—Head and Neck Surgery: Applications in Image-Guidance, Surgical Simulation and Patient-Specific Modeling , 2015, PloS one.

[17]  M. Bhutta,et al.  A review of simulation platforms in surgery of the temporal bone , 2016, Clinical otolaryngology : official journal of ENT-UK ; official journal of Netherlands Society for Oto-Rhino-Laryngology & Cervico-Facial Surgery.

[18]  Ernesto Suaste-Gómez,et al.  Developing an Ear Prosthesis Fabricated in Polyvinylidene Fluoride by a 3D Printer with Sensory Intrinsic Properties of Pressure and Temperature , 2016, Sensors.

[19]  T. Tollefson,et al.  3D Printing: current use in facial plastic and reconstructive surgery , 2017, Current opinion in otolaryngology & head and neck surgery.

[20]  D. Bakhos,et al.  Usefulness of temporal bone prototype for drilling training: A prospective study , 2017, Clinical otolaryngology : official journal of ENT-UK ; official journal of Netherlands Society for Oto-Rhino-Laryngology & Cervico-Facial Surgery.