Research on optimum method to eliminate backfire of hydrogen internal combustion engines based on combining postponing ignition timing with water injection of intake manifold

Abstract Preignition or backfire occurs easily in hydrogen internal combustion engines (HICE) of manifold injection type, especially, the bigger equivalence ratio is, the more serious backfire happens. And decreasing equivalence ratio will reduce engine's power output. So to analyze and resolve the contradiction between abnormal combustion and power output in HICE is the key of promoting the progress of research on HICE. Postponing ignition timing is helpful to reducing the occurrence degree or inclination of pre-ignition, and water injection of intake manifold can be used to eliminate backfire. But postponement of ignition has a lesser effect on power output and brake thermal efficiency than water injection of intake manifold, That is to say water injection would bring power output to drop obviously, and water injection will also has many disadvantages, such as, the worse corrosion degree of cylinder and deteriorated lubrication performance. It is necessary to combine postponing ignition timing with water injection of intake manifold to give full play to their advantages, and avoid their disadvantages to the greatest extent. In the paper, the concept of pre-ignition strength and backfire strength were presented, and the inhibition degree of pre-ignition and the elimination degree of backfire was introduced. The functional relationship between inhibition degree of pre-ignition and ignition timing was established, and the functional relationship between the elimination degree of backfire and water injection rate was also established for quantitative analysis and research into inhibiting pre-ignition and eliminating backfire. A optimal control method was put forward about resolving contradiction between eliminating backfire and improving performance of HICE, which not only eliminates backfire, but also take into account the power output and economy.

[1]  Alberto Boretti,et al.  Advantages of the direct injection of both diesel and hydrogen in dual fuel H2ICE , 2011 .

[2]  Lijun Wang,et al.  Research on the optimizing control technology based on fuzzy-neural network for hydrogen-fueled engines , 2006 .

[3]  G. Nagarajan,et al.  An experimental investigation of hydrogen-enriched air induction in a diesel engine system , 2008 .

[4]  L. Das Hydrogen engine: research and development (R&D) programmes in Indian Institute of Technology (IIT), Delhi , 2002 .

[5]  Tien Ho,et al.  Optimising multi-objective control methodology of a hydrogen powered car , 2011 .

[6]  T. Nejat Veziroğlu,et al.  Hydrogen energy progress XIII : proceedings of the 13th World Hydrogen Energy Conference, Beijing, China, June 12-15, 2000 , 2000 .

[7]  Yang Zhenzhong,et al.  Research on optimal control to resolve the contradictions between restricting abnormal combustion and improving power output in hydrogen fueled engines , 2012 .

[8]  Ouyang Minggao,et al.  Redesign and Control of a Hydrogen-fueled IC Engine , 2006 .

[9]  Ghazi A. Karim,et al.  Hydrogen as a spark ignition engine fuel , 2003 .

[10]  T. Nejat Veziroglu,et al.  Quarter century of hydrogen movement 1974–2000 , 2000 .

[11]  Zhenzhong Yang,et al.  Research on optimal calibration technology for hydrogen-fueled engine based on nonlinear programming theory , 2010 .

[12]  R. Steeper,et al.  The hydrogen-fueled internal combustion engine : a technical review. , 2006 .

[13]  S Furuhama STATE OF THE ART AND FUTURE TRENDS IN HYDROGEN-FUELLED ENGINES , 1983 .

[14]  Dilip Sharma,et al.  Performance and emission studies of direct injection C.I. engine in duel fuel mode (hydrogen-diesel) with EGR , 2012 .

[15]  Roger Sierens,et al.  Aspects concerning the optimisation of a hydrogen fueled engine. , 2001 .

[16]  L.A.D. Sheridan,et al.  Defining a model-based calibration process for a twin-independent valve timing engine , 2004, Proceedings of the 2004 IEEE International Conference on Control Applications, 2004..