Finite element analysis of the frictional wheel-rail rolling contact using explicit and implicit methods

Abstract A three-dimensional finite element rolling contact model between wheel and rail with increased spin effect is developed in this paper to study the normal and the tangential contact problems, as well as the creep force characteristics in elasticity and in elasto-plasticity. Three finite element analyzes using the explicit and the implicit integration scheme are employed and the finite element solution is compared to the solution of the CONTACT software in elasticity. The elastic solution with the implicit methods is sensitive to the energy dissipation related to the time increment size. The optimum time increment size is found as a compromise between computational efficiency and calculation accuracy. The numerical results show a good agreement between the finite element methods and CONTACT for the normal and the tangential contact solution. The initial slopes of the creep force characteristics in the longitudinal and the lateral direction from the implicit solution are slightly lower than the results from CONTACT. When the elasto-plastic material behavior is applied, the maximum contact pressure and the von Mises stresses are reduced for both explicit and implicit methods and the plastic deformation occurs in all the contact area. The contact patch becomes egg shaped instead of the elliptic and the area of stick zone area increases. In addition, the initial slopes of the creepage-creep force curves are reduced by 15% in the longitudinal direction and by 13% in the lateral direction.

[1]  Jens C. O. Nielsen,et al.  Assessment of methods for calculating contact pressure in wheel–rail/switch contact , 2006 .

[2]  Thomas J. R. Hughes,et al.  Improved numerical dissipation for time integration algorithms in structural dynamics , 1977 .

[3]  R. Courant,et al.  On the Partial Difference Equations, of Mathematical Physics , 2015 .

[4]  K. Johnson,et al.  Contact of Nonspherical Elastic Bodies Transmitting Tangential Forces , 1964 .

[5]  R. Lewis,et al.  Third body layer—experimental results and a model describing its influence on the traction coefficient , 2014 .

[6]  J. J. Kalker,et al.  A Fast Algorithm for the Simplified Theory of Rolling Contact , 1982 .

[7]  Zili Li,et al.  The solution of frictional wheel–rail rolling contact with a 3D transient finite element model: Validation and error analysis , 2011 .

[8]  F. W. Carter,et al.  On the action of a locomotive driving wheel , 1926 .

[9]  R. Courant,et al.  Über die partiellen Differenzengleichungen der mathematischen Physik , 1928 .

[10]  Edmund Taylor Whittaker,et al.  On the partial differential equations of mathematical physics , 1903 .

[11]  P R Nayak,et al.  FRICTION AND CREEP IN ROLLING CONTACT , 1970 .

[12]  E. Vollebregt,et al.  Numerical modeling of measured railway creep versus creep-force curves with CONTACT , 2014 .

[13]  Pierre-Jérôme Jehel Modélisation numérique des phénomènes d'amortissement par dissipation d'énergie matérielle dans les structures de type portique en béton armé sous séisme , 2009 .

[14]  Rolf Dollevoet,et al.  Solution of the wheel-rail rolling contact in elasticity and elasto-plasticity using a transient finite element model , 2009 .

[15]  Xuesong Jin,et al.  Three-dimensional elastic–plastic stress analysis of wheel–rail rolling contact , 2011 .