Workspace Analysis of Multibody Cable-Driven Mechanisms

[1]  Saeed Behzadipour,et al.  A New Cable-Based Parallel Robot with Three Degrees of Freedom , 2005 .

[2]  C. J. Thompson,et al.  Charlotte™ Robot Technology for Space and Terrestrial Applications , 1995 .

[3]  Manfred Hiller,et al.  Continuous Workspace Analysis, Synthesis and Optimization of Wire Robots , 2008 .

[4]  Guilin Yang,et al.  A generic tension-closure analysis method for fully-constrained cable-driven parallel manipulators , 2009, 2009 IEEE International Conference on Robotics and Automation.

[5]  Saeed Behzadipour,et al.  Workspace Analysis of a Three DOF Cable-Driven Mechanism , 2009 .

[6]  Yi Yang,et al.  Workspace analysis of a novel 6-dof cable-driven parallel robot , 2009, 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[7]  Saeed Behzadipour,et al.  Tensionability Conditions of a Multi-Body System Driven by Cables , 2007 .

[8]  Mustafa Shabbir Kurbanhusen,et al.  Force-closure workspace analysis of cable-driven parallel mechanisms , 2006 .

[9]  Jean-Pierre Merlet,et al.  Interval-Analysis-Based Determination of the Wrench-Feasible Workspace of Parallel Cable-Driven Robots , 2011, IEEE Transactions on Robotics.

[10]  Clément Gosselin,et al.  Analysis of the wrench-closure workspace of planar parallel cable-driven mechanisms , 2006, IEEE Transactions on Robotics.

[11]  Clément Gosselin,et al.  On the Properties and the Determination of the Wrench-Closure Workspace of Planar Parallel Cable-Driven Mechanisms , 2004 .

[12]  James S. Albus,et al.  The NIST robocrane , 1993, J. Field Robotics.

[13]  Sunil K. Agrawal,et al.  Cable suspended robots: design, planning and control , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[14]  Roger V. Bostelman,et al.  3D Cable-Based Cartesian Metrology System , 2004 .

[15]  Manfred Hiller,et al.  Estimating the Controllable Workspace of Tendon-Based Stewart Platforms , 2000 .

[16]  Ken Ito,et al.  A new type of master robot for teleoperation using a radial wire drive system , 1993, Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '93).

[17]  Vijay R. Kumar,et al.  Workspaces of Cable-Actuated Parallel Manipulators , 2006 .

[18]  Imme Ebert-Uphoff,et al.  Wrench-feasible workspace generation for cable-driven robots , 2006, IEEE Transactions on Robotics.

[19]  Marc Gouttefarde,et al.  Characterizations of Fully Constrained Poses of Parallel Cable-Driven Robots: A Review , 2008 .

[20]  Adam Jacoff,et al.  Design and workspace analysis of a 6-6 cable-suspended parallel robot , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[21]  Jean-Pierre Merlet,et al.  Wrench-Feasible Workspace of Parallel Cable-Driven Mechanisms , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[22]  Shuai Jiang,et al.  Design and workspace optimization of a 6/6 cable-suspended parallel robot , 2010, 2010 International Conference on Computer Application and System Modeling (ICCASM 2010).

[23]  Ou Ma,et al.  Workspace Determination of General 6-d.o.f. Cable Manipulators , 2008, Adv. Robotics.

[24]  Saeed Behzadipour,et al.  Design and Testing of an ultra-High-Speed cable robot , 2006, Int. J. Robotics Autom..

[25]  Sadao Kawamura,et al.  A force display system using a serial-link structure driven by a parallel-wire mechanism , 2005, Adv. Robotics.

[26]  Mohammad Eghtesad,et al.  Workspace Analysis for Planar and Spatial Redundant Cable Robots , 2009 .