Comparison of lignin derivatives as substrates for laccase-catalyzed scavenging of oxygen in coatings and films

BackgroundLignin derivatives are phenylpropanoid biopolymers derived from pulping and biorefinery processes. The possibility to utilize lignin derivatives from different types of processes in advanced enzyme-catalyzed oxygen-scavenging systems intended for active packaging was explored. Laccase-catalyzed oxidation of alkali lignin (LA), hydrolytic lignin (LH), organosolv lignin (LO), and lignosulfonates (LS) was compared using oxygen-scavenging coatings and films in liquid and gas phase systems.ResultsWhen coatings containing lignin derivatives and laccase were immersed in a buffered aqueous solution, the oxygen-scavenging capability increased in the order LO < LH < LA < LS. Experiments with coatings containing laccase and LO, LH or LA incubated in oxygen-containing gas in air-tight chambers and at a relative humidity (RH) of 100% showed that paperboard coated with LO and laccase reduced the oxygen content from 1.0% to 0.4% during a four-day period, which was far better than the results obtained with LA or LH. LO-containing coatings incubated at 92% RH also displayed activity, with a decrease in oxygen from 1.0% to 0.7% during a four-day period. The oxygen scavenging was not related to the content of free phenolic hydroxyl groups, which increased in the order LO < LS < LH < LA. LO and LS were selected for further studies and films containing starch, clay, glycerol, laccase and LO or LS were characterized using gel permeation chromatograpy, dynamic mechanical analysis, and wet stability.ConclusionsThe investigation shows that different lignin derivatives exhibit widely different properties as a part of active coatings and films. Results indicate that LS and LO were most suitable for the application studied and differences between them were attributed to a higher degree of laccase-catalyzed cross-linking of LS than of LO. Inclusion in active-packaging systems offers a new way to utilize some types of lignin derivatives from biorefining processes.

[1]  M. Himmel,et al.  Characterization of lignin using multi-angle laser light scattering and atomic force microscopy , 2006 .

[2]  A. Ragauskas,et al.  Challenges of the utilization of wood polymers: how can they be overcome? , 2011, Applied Microbiology and Biotechnology.

[3]  V. Wigotsky,et al.  Plastics in Europe , 1995 .

[4]  A. Hermansson,et al.  Effects of Ca- and Na-lignosulfonate on starch gelatinization and network formation , 2004 .

[5]  U. Sonesson,et al.  Global food losses and food waste: extent, causes and prevention , 2011 .

[6]  J N Saddler,et al.  A two-stage pretreatment approach to maximise sugar yield and enhance reactive lignin recovery from poplar wood chips. , 2013, Bioresource technology.

[7]  B. Sundberg,et al.  Multivariate curve resolution provides a high-throughput data processing pipeline for pyrolysis-gas chromatography/mass spectrometry , 2012 .

[8]  G. Brunner,et al.  Comparison of different pretreatment methods for lignocellulosic materials. Part II: Influence of pretreatment on the properties of rye straw lignin. , 2011, Bioresource technology.

[9]  Wolf R. Vieth,et al.  Diffusion in and Through Polymers: Principles and Applications , 1991 .

[10]  G. Henriksson,et al.  ORIGINAL RESEARCH: Sulfonation of phenolic end groups in lignin directs laccase-initiated reactions towards cross-linking , 2010 .

[11]  L. C. Morais,et al.  Thermoplastic starch–lignosulfonate blends. 1. Factorial planning as a tool for elucidating new data from high performance size-exclusion chromatography and mechanical tests , 2005 .

[12]  Erik Dahlquist,et al.  Biomass as Energy Source : Resources, Systems and Applications , 2013 .

[13]  S. Baumberger.  Starch-Lignin Films , 2002 .

[14]  Y. Lai,et al.  Estimation of phenolic hydroxyl groups in wood by a periodate oxidation method , 1990 .

[15]  Thomas Q. Hu,et al.  Chemical Modification, Properties, and Usage of Lignin , 2013, Springer US.

[16]  A. Biswas,et al.  Preparation of starch-sodium lignosulfonate graft copolymers via laccase catalysis and characterization of antioxidant activity. , 2013, Carbohydrate polymers.

[17]  L. Lynd,et al.  How biotech can transform biofuels , 2008, Nature Biotechnology.

[18]  Warren Mabee,et al.  Biorefining of softwoods using ethanol organosolv pulping: preliminary evaluation of process streams for manufacture of fuel-grade ethanol and co-products. , 2005, Biotechnology and bioengineering.

[19]  D. Lourdin,et al.  Lignin incorporation combined with electron-beam irradiation improves the surface water resistance of starch films. , 2004, Biomacromolecules.

[20]  G. D. Valle,et al.  Use of kraft lignin as filler for starch films , 1998 .

[21]  J. Gustavsson.  Global food losses and food waste , 2011 .

[22]  W. Boerjan,et al.  Lignin biosynthesis. , 2003, Annual review of plant biology.

[23]  L. Jönsson,et al.  Oxygen-scavenging coatings and films based on lignosulfonates and laccase. , 2012, Journal of biotechnology.

[24]  D. Lourdin,et al.  Preparation and properties of thermally moulded and cast lignosulfonates-starch blends , 1997 .

[25]  M. Osterhold,et al.  Dynamic mechanical analysis in coatings industry , 2004 .